Fossil with Commonmark

All of the source code for fossil is contained in the src/ subdirectory.
But there is a lot of generated code, so you will probably want to
use the Makefile.  To do a complete build on unix, just type:

   make











On a windows box, use one of the Makefiles in the win/ subdirectory,
according to your compiler and environment.  For example:


   make -f win/Makefile.w32





If you have trouble, or you want to do something fancy, just look at
top level makefile. There are 6 configuration options that are all well
commented. Instead of editing the Makefile, consider copying the Makefile
to an alternative name such as "GNUMakefile", "BSDMakefile", or "makefile"
and editing the copy.

To do a complete build on most unix systems, just type:

   make

If you have an unusual unix system for which the standard Makefile
will not work, or if you want to do some non-standard options, you can
also run:

   ./configure; make

The ./configure script builds GNUmakefile which will be used in place
of Makefile.  Run "./configure --help" for a listing of the available
options.

On a windows box, use one of the Makefiles in the win/ subdirectory,
according to your compiler and environment.  If you have GCC and MSYS
installed on your system, the consider:

   make -f win/Makefile.mingw

If you have VC++ installed on your system, then consider:

   cd win; nmake /f Makefile.msc

If you have trouble, or you want to do something fancy, just look at
top level makefile. There are 6 configuration options that are all well
commented. Instead of editing the Makefile, consider copying the Makefile
to an alternative name such as "GNUMakefile", "BSDMakefile", or "makefile"
and editing the copy.

#!/usr/bin/make
#
# This is the top-level makefile for Fossil when the build is occurring
# on a unix platform.  This works out-of-the-box on most unix platforms.
# But you are free to vary some of the definitions if desired.
#
#### The toplevel directory of the source tree.  Fossil can be built
#    in a directory that is separate from the source tree.  Just change
#    the following to point from the build directory to the src/ folder.
#
SRCDIR = @srcdir@/src

#### The directory into which object code files should be written.
#
#
OBJDIR = ./bld

#### C Compiler and options for use in building executables that
#    will run on the platform that is doing the build.  This is used
#    to compile code-generator programs as part of the build process.
#    See TCC below for the C compiler for building the finished binary.
#
BCC = @CC_FOR_BUILD@

#### The suffix to add to final executable file.  When cross-compiling
#    to windows, make this ".exe".  Otherwise leave it blank.
#
E = @EXEEXT@

TCC = @CC@

#### Tcl shell for use in running the fossil testsuite.  If you do not
#    care about testing the end result, this can be blank.
#
TCLSH = tclsh

LIB =	@LDFLAGS@ @EXTRA_LDFLAGS@ @LIBS@
TCC +=	@EXTRA_CFLAGS@ @CPPFLAGS@ @CFLAGS@ -DHAVE_AUTOCONFIG_H
INSTALLDIR = $(DESTDIR)@prefix@/bin
USE_SYSTEM_SQLITE = @USE_SYSTEM_SQLITE@

include $(SRCDIR)/main.mk

distclean: clean
	rm -f autoconfig.h config.log GNUmakefile

1.18

1.19

# System autoconfiguration. Try: ./configure --help

use cc cc-lib

options {
    with-openssl:path|auto|none
                         => {Look for openssl in the given path, or auto or none}
    with-zlib:path       => {Look for zlib in the given path}
    internal-sqlite=1    => {Don't use the internal sqlite, use the system one}
    static=0             => {Link a static executable}
    lineedit=1           => {Disable line editing}
    fossil-debug=0       => {Build with fossil debugging enabled}
}

# sqlite wants these types if possible
cc-with {-includes {stdint.h inttypes.h}} {
    cc-check-types uint32_t uint16_t int16_t uint8_t
}

# Use pread/pwrite system calls in place of seek + read/write if possible
define USE_PREAD [cc-check-functions pread]

# Find tclsh for the test suite. Can't yet use jimsh for this.
cc-check-progs tclsh

define EXTRA_CFLAGS ""
define EXTRA_LDFLAGS ""
define USE_SYSTEM_SQLITE ""

if {![opt-bool internal-sqlite]} {
  proc find_internal_sqlite {} {

    # On some systems (slackware), libsqlite3 requires -ldl to link. So
    # search for the system SQLite once with -ldl, and once without. If
    # the library can only be found with $extralibs set to -ldl, then 
    # the code below will append -ldl to LIBS.
    #
    foreach extralibs {{} {-ldl}} {

      # Locate the system SQLite by searching for sqlite3_open(). Then check
      # if sqlite3_wal_checkpoint() can be found as well. If we can find
      # open() but not wal_checkpoint(), then the system SQLite is too old
      # to link against fossil.
      #
      if {[cc-check-function-in-lib sqlite3_open sqlite3 $extralibs]} {
        if {![cc-check-function-in-lib sqlite3_wal_checkpoint sqlite3 $extralibs]} {
          user-error "system sqlite3 too old (require >= 3.7.0)"
        }

        # Success. Update symbols and return.
        #
        define USE_SYSTEM_SQLITE 1
        define-append LIBS $extralibs
        return
      }
    }
    user-error "system sqlite3 not found"
  }

  find_internal_sqlite
}

if {[opt-bool fossil-debug]} {
    define-append EXTRA_CFLAGS -DFOSSIL_DEBUG
}

if {[opt-bool static]} {
    # XXX: This will not work on all systems.
    define-append EXTRA_LDFLAGS -static
}


# Check for zlib, using the given location if specified
set zlibpath [opt-val with-zlib]
if {$zlibpath ne ""} {
    cc-with [list -cflags "-I$zlibpath -L$zlibpath"]
    define-append EXTRA_CFLAGS -I$zlibpath
    define-append EXTRA_LDFLAGS -L$zlibpath
}
if {![cc-check-includes zlib.h] || ![cc-check-function-in-lib inflateEnd z]} {
    user-error "zlib not found please install it or specify the location with --with-zlib"
}

# Helper for openssl checking
proc check-for-openssl {msg {cflags {}}} {
    msg-checking "Checking for $msg..."
    set rc 0
    msg-quiet cc-with [list -cflags $cflags -libs {-lssl -lcrypto}] {
        if {[cc-check-includes openssl/ssl.h] && [cc-check-functions SSL_new]} {
            incr rc
        }
    }
    if {$rc} {
        msg-result "ok"
        return 1
    } else {
        msg-result "no"
        return 0
    }
}

set ssldirs [opt-val with-openssl]
if {$ssldirs ne "none"} {
    set found 0
    if {$ssldirs in {auto ""}} {
        catch {
            set cflags [exec pkg-config openssl --cflags-only-I]
            set ldflags [exec pkg-config openssl --libs-only-L]

            set found [check-for-openssl "ssl via pkg-config" "$cflags $ldflags"]
        } msg
        if {!$found} {
            set ssldirs "{} /usr/sfw /usr/local/ssl /usr/lib/ssl /usr/ssl /usr/pkg /usr/local /usr"
        }
    }
    if {!$found} {
        foreach dir $ssldirs {
            if {$dir eq ""} {
                set msg "system ssl"
                set cflags ""
                set ldflags ""
            } else {
                set msg "ssl in $dir"
                set cflags "-I$dir/include"
                set ldflags "-L$dir/include"
            }
            if {[check-for-openssl $msg "$cflags $ldflags"]} {
                incr found
                break
            }
        }
    }
    if {$found} {
        define FOSSIL_ENABLE_SSL
        define-append EXTRA_CFLAGS $cflags
        define-append EXTRA_LDFLAGS $ldflags
        define-append LIBS -lssl -lcrypto
        msg-result "HTTP support enabled"
    } else {
        user-error "OpenSSL not found. Consider --with-openssl=none to disable HTTPS support"
    }
}

if {[opt-bool lineedit]} {
    # Need readline-compatible line editing
    cc-with {-includes stdio.h} {
        if {[cc-check-includes readline/readline.h] && [cc-check-function-in-lib readline readline]} {
            msg-result "Using readline for line editing"
        } elseif {[cc-check-includes editline/readline.h] && [cc-check-function-in-lib readline edit]} {
            define-feature editline
            msg-result "Using editline for line editing"
        }
    }
}

# Network functions require libraries on some systems
cc-check-function-in-lib gethostbyname nsl
if {![cc-check-function-in-lib socket {socket network}]} {
    # Last resort, may be Windows
    if {[string match *mingw* [get-define host]]} {
        define-append LIBS -lwsock32
    }
}

# Check for getpassphrase() for Solaris 10 where getpass() truncates to 10 chars
if {![cc-check-functions getpassphrase]} {
    # Haiku needs this
    cc-check-function-in-lib getpass bsd
}

make-template GNUmakefile.in
make-config-header autoconfig.h -auto {USE_* FOSSIL_*}

Unless explicitly stated, all files which form part of autosetup
are released under the following license:

---------------------------------------------------------------------
autosetup - A build environment "autoconfigurator"

Copyright (c) 2010-2011, WorkWare Systems <http://workware.net.au/>

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:

1. Redistributions of source code must retain the above copyright
   notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above
   copyright notice, this list of conditions and the following
   disclaimer in the documentation and/or other materials
   provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE WORKWARE SYSTEMS ``AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WORKWARE
SYSTEMS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The views and conclusions contained in the software and documentation
are those of the authors and should not be interpreted as representing
official policies, either expressed or implied, of WorkWare Systems.

This is autosetup v0.6.2. See http://msteveb.github.com/autosetup/

#!/bin/sh
# Copyright (c) 2006-2010 WorkWare Systems http://www.workware.net.au/
# All rights reserved
# vim:se syntax=tcl:
# \
dir=`dirname "$0"`; exec `"$dir/find-tclsh" || echo false` "$0" "$@"

set autosetup(version) 0.6.2

# Can be set to 1 to debug early-init problems
set autosetup(debug) 0

##################################################################
#
# Main flow of control, option handling
#
proc main {argv} {
	global autosetup define

	# There are 3 potential directories involved:
	# 1. The directory containing autosetup (this script)
	# 2. The directory containing auto.def
	# 3. The current directory

	# From this we need to determine:
	# a. The path to this script (and related support files)
	# b. The path to auto.def
	# c. The build directory, where output files are created

	# This is also complicated by the fact that autosetup may
	# have been run via the configure wrapper ([getenv WRAPPER] is set)

	# Here are the rules.
	# a. This script is $::argv0
	#    => dir, prog, exe, libdir
	# b. auto.def is in the directory containing the configure wrapper,
	#    otherwise it is in the current directory.
	#    => srcdir, autodef
	# c. The build directory is the current directory
	#    => builddir, [pwd]

	# 'misc' is needed before we can do anything, so set a temporary libdir
	# in case this is the development version
	set autosetup(libdir) [file dirname $::argv0]/lib
	use misc

	# (a)
	set autosetup(dir) [realdir [file dirname [realpath $::argv0]]]
	set autosetup(prog) [file join $autosetup(dir) [file tail $::argv0]]
	set autosetup(exe) [getenv WRAPPER $autosetup(prog)]
	if {$autosetup(installed)} {
		set autosetup(libdir) $autosetup(dir)
	} else {
		set autosetup(libdir) [file join $autosetup(dir) lib]
	}
	autosetup_add_dep $autosetup(prog)

	# (b)
	if {[getenv WRAPPER ""] eq ""} {
		# Invoked directly
		set autosetup(srcdir) [pwd]
	} else {
		# Invoked via the configure wrapper
		set autosetup(srcdir) [file dirname $autosetup(exe)]
	}
	set autosetup(autodef) [relative-path $autosetup(srcdir)/auto.def]

	# (c)
	set autosetup(builddir) [pwd]

	set autosetup(argv) $argv
	set autosetup(cmdline) {}
	set autosetup(options) {}
	set autosetup(optionhelp) {}
	set autosetup(showhelp) 0

	# Parse options
	use getopt

	array set ::useropts [getopt argv]

	#"=Core Options:"
	options-add {
		help:=local  => "display help and options. Optionally specify a module name, such as --help=system"
		version      => "display the version of autosetup"
		ref:=text manual:=text
		reference:=text => "display the autosetup command reference. 'text', 'wiki', 'asciidoc' or 'markdown'"
		debug        => "display debugging output as autosetup runs"
		install      => "install autosetup to the current directory (in the 'autosetup/' subdirectory)"
		force init   => "create an initial 'configure' script if none exists"
		# Undocumented options
		option-checking=1
		nopager
		quiet
		timing
		conf:
	}

	#parray ::useropts
	if {[opt-bool version]} {
		puts $autosetup(version)
		exit 0
	}

	# autosetup --conf=alternate-auto.def
	if {[opt-val conf] ne ""} {
		set autosetup(autodef) [opt-val conf]
	}

	# Debugging output (set this early)
	incr autosetup(debug) [opt-bool debug]
	incr autosetup(force) [opt-bool force]
	incr autosetup(msg-quiet) [opt-bool quiet]
	incr autosetup(msg-timing) [opt-bool timing]

	# If the local module exists, source it now to allow for
	# project-local customisations
	if {[file exists $autosetup(libdir)/local.tcl]} {
		use local
	}

	if {[opt-val help] ne ""} {
		incr autosetup(showhelp)
		use help
		autosetup_help [opt-val help]
	}

	if {[opt-val {manual ref reference}] ne ""} {
		use help
		autosetup_reference [opt-val {manual ref reference}]
	}

	if {[opt-bool init]} {
		use init
		autosetup_init
	}

	if {[opt-bool install]} {
		use install
		autosetup_install
	}

	if {![file exists $autosetup(autodef)]} {
		# Check for invalid option first
		options {}
		user-error "No auto.def found in $autosetup(srcdir)"
	}

	# Parse extra arguments into autosetup(cmdline)
	foreach arg $argv {
		if {[regexp {([^=]*)=(.*)} $arg -> n v]} {
			dict set autosetup(cmdline) $n $v
			define $n $v
		} else {
			user-error "Unexpected parameter: $arg"
		}
	}

	autosetup_add_dep $autosetup(autodef)

	set cmd [file-normalize $autosetup(exe)]
	foreach arg $autosetup(argv) {
		append cmd " [quote-if-needed $arg]"
	}
	define AUTOREMAKE $cmd

	# Log how we were invoked
	configlog "Invoked as: [getenv WRAPPER $::argv0] [quote-argv $autosetup(argv)]"

	source $autosetup(autodef)

	# Could warn here if options {} was not specified

	show-notices

	if {$autosetup(debug)} {
		parray define
	}

	exit 0
}

# @opt-bool option ...
#
# Check each of the named, boolean options and return 1 if any of them have
# been set by the user.
# 
proc opt-bool {args} {
	option-check-names {*}$args
	opt_bool ::useropts {*}$args
}

# @opt-val option-list ?default=""?
#
# Returns a list containing all the values given for the non-boolean options in 'option-list'.
# There will be one entry in the list for each option given by the user, including if the
# same option was used multiple times.
# If only a single value is required, use something like:
#
## lindex [opt-val $names] end
#
# If no options were set, $default is returned (exactly, not as a list).
# 
proc opt-val {names {default ""}} {
	option-check-names {*}$names
	join [opt_val ::useropts $names $default]
}

proc option-check-names {args} {
	foreach o $args {
		if {$o ni $::autosetup(options)} {
			autosetup-error "Request for undeclared option --$o"
		}
	}
}

# Parse the option definition in $opts and update
# ::useropts() and ::autosetup(optionhelp) appropriately
#
proc options-add {opts {header ""}} {
	global useropts autosetup

	# First weed out comment lines
	set realopts {}
	foreach line [split $opts \n] {
		if {![string match "#*" [string trimleft $line]]} {
			append realopts $line \n
		}
	}
	set opts $realopts

	for {set i 0} {$i < [llength $opts]} {incr i} {
		set opt [lindex $opts $i]
		if {[string match =* $opt]} {
			# This is a special heading
			lappend autosetup(optionhelp) $opt ""
			set header {}
			continue
		}

		#puts "i=$i, opt=$opt"
		regexp {^([^:=]*)(:)?(=)?(.*)$} $opt -> name colon equal value
		if {$name in $autosetup(options)} {
			autosetup-error "Option $name already specified"
		}

		#puts "$opt => $name $colon $equal $value"

		# Find the corresponding value in the user options
		# and set the default if necessary
		if {[string match "-*" $opt]} {
			# This is a documentation-only option, like "-C <dir>"
			set opthelp $opt
		} elseif {$colon eq ""} {
			# Boolean option
			lappend autosetup(options) $name

			if {![info exists useropts($name)]} {
				set useropts($name) $value
			}
			if {$value eq "1"} {
				set opthelp "--disable-$name"
			} else {
				set opthelp "--$name"
			}
		} else {
			# String option.
			lappend autosetup(options) $name

			if {$equal eq "="} {
				if {[info exists useropts($name)]} {
					# If the user specified the option with no value, the value will be "1"
					# Replace with the default
					if {$useropts($name) eq "1"} {
						set useropts($name) $value
					}
				}
				set opthelp "--$name?=$value?"
			} else {
				set opthelp "--$name=$value"
			}
		}

		# Now create the help for this option if appropriate
		if {[lindex $opts $i+1] eq "=>"} {
			set desc [lindex $opts $i+2]
			#string match \n* $desc
			if {$header ne ""} {
				lappend autosetup(optionhelp) $header ""
				set header ""
			}
			# A multi-line description
			lappend autosetup(optionhelp) $opthelp $desc
			incr i 2
		}
	}
}

# @module-options optionlist
#
# Like 'options', but used within a module.
proc module-options {opts} {
	set header ""
	if {$::autosetup(showhelp) > 1 && [llength $opts]} {
		set header "Module Options:"
	}
	options-add $opts $header

	if {$::autosetup(showhelp)} {
		# Ensure that the module isn't executed on --help
		# We are running under eval or source, so use break
		# to prevent further execution
		#return -code break -level 2
		return -code break
	}
}

proc max {a b} {
	expr {$a > $b ? $a : $b}
}

proc options-wrap-desc {text length firstprefix nextprefix initial} {
	set len $initial
	set space $firstprefix
	foreach word [split $text] {
		set word [string trim $word]
		if {$word == ""} {
			continue
		}
		if {$len && [string length $space$word] + $len >= $length} {
			puts ""
			set len 0
			set space $nextprefix
		}
		incr len [string length $space$word]
		puts -nonewline $space$word
		set space " "
	}
	if {$len} {
		puts ""
	}
}

proc options-show {} {
	# Determine the max option width
	set max 0
	foreach {opt desc} $::autosetup(optionhelp) {
		if {[string match =* $opt] || [string match \n* $desc]} {
			continue
		}
		set max [max $max [string length $opt]]
	}
	set indent [string repeat " " [expr $max+4]]
	set cols [getenv COLUMNS 80]
	catch {
		lassign [exec stty size] rows cols
	}
	incr cols -1
	# Now output
	foreach {opt desc} $::autosetup(optionhelp) {
		if {[string match =* $opt]} {
			puts [string range $opt 1 end]
			continue
		}
		puts -nonewline "  [format %-${max}s $opt]"
		if {[string match \n* $desc]} {
			puts $desc
		} else {
			options-wrap-desc [string trim $desc] $cols "  " $indent [expr $max + 2]
		}
	}
}

# @options options-spec
#
# Specifies configuration-time options which may be selected by the user
# and checked with opt-val and opt-bool. The format of options-spec follows.
#
# A boolean option is of the form:
#
## name[=0|1]  => "Description of this boolean option"
#
# The default is name=0, meaning that the option is disabled by default.
# If name=1 is used to make the option enabled by default, the description should reflect
# that with text like "Disable support for ...".
#
# An argument option (one which takes a parameter) is of the form:
#
## name:[=]value  => "Description of this option"
#
# If the name:value form is used, the value must be provided with the option (as --name=myvalue).
# If the name:=value form is used, the value is optional and the given value is used as the default
# if is not provided.
#
# Undocumented options are also supported by omitting the "=> description.
# These options are not displayed with --help and can be useful for internal options or as aliases.
#
# For example, --disable-lfs is an alias for --disable=largefile:
#
## lfs=1 largefile=1 => "Disable large file support"
# 
proc options {optlist} {
	# Allow options as a list or args
	options-add $optlist "Local Options:"

	if {$::autosetup(showhelp)} {
		options-show
		exit 0
	}

	# Check for invalid options
	if {[opt-bool option-checking]} {
		foreach o [array names ::useropts] {
			if {$o ni $::autosetup(options)} {
				user-error "Unknown option --$o"
			}
		}
	}
}

proc config_guess {} {
	if {[file-isexec $::autosetup(dir)/config.guess]} {
		exec-with-stderr sh $::autosetup(dir)/config.guess
	} else {
		configlog "No config.guess, so using uname"
		string tolower [exec uname -p]-unknown-[exec uname -s][exec uname -r]
	}
}

proc config_sub {alias} {
	if {[file-isexec $::autosetup(dir)/config.sub]} {
		exec-with-stderr sh $::autosetup(dir)/config.sub $alias
	} else {
		return $alias
	}
}

# @define name ?value=1?
# 
# Defines the named variable to the given value.
# These (name, value) pairs represent the results of the configuration check
# and are available to be checked, modified and substituted.
#
proc define {name {value 1}} {
	set ::define($name) $value
	#dputs "$name <= $value"
}

# @define-append name value ...
#
# Appends the given value(s) to the given 'defined' variable.
# If the variable is not defined or empty, it is set to $value.
# Otherwise the value is appended, separated by a space.
# Any extra values are similarly appended.
# If any value is already contained in the variable (as a substring) it is omitted.
#
proc define-append {name args} {
	if {[get-define $name ""] ne ""} {
		# Make a token attempt to avoid duplicates
		foreach arg $args {
			if {[string first $arg $::define($name)] == -1} {
				append ::define($name) " " $arg
			}
		}
	} else {
		set ::define($name) [join $args]
	}
	#dputs "$name += [join $args] => $::define($name)"
}

# @get-define name ?default=0?
#
# Returns the current value of the 'defined' variable, or $default
# if not set.
#
proc get-define {name {default 0}} {
	if {[info exists ::define($name)]} {
		#dputs "$name => $::define($name)"
		return $::define($name)
	}
	#dputs "$name => $default"
	return $default
}

# @is-defined name
#
# Returns 1 if the given variable is defined.
#
proc is-defined {name} {
	info exists ::define($name)
}

# @all-defines
#
# Returns a dictionary (name value list) of all defined variables.
#
# This is suitable for use with 'dict', 'array set' or 'foreach'
# and allows for arbitrary processing of the defined variables.
#
proc all-defines {} {
	array get ::define
}


# @get-env name default
#
# If $name was specified on the command line, return it.
# If $name was set in the environment, return it.
# Otherwise return $default.
#
proc get-env {name default} {
	if {[dict exists $::autosetup(cmdline) $name]} {
		return [dict get $::autosetup(cmdline) $name]
	}
	getenv $name $default
}

# @env-is-set name
#
# Returns 1 if the $name was specified on the command line or in the environment.
#
proc env-is-set {name} {
	if {[dict exists $::autosetup(cmdline) $name]} {
		return 1
	}
	info exists ::env($name)
}

# @readfile filename ?default=""?
#
# Return the contents of the file, without the trailing newline.
# If the doesn't exist or can't be read, returns $default.
#
proc readfile {filename {default_value ""}} {
	set result $default_value
	catch {
		set f [open $filename]
		set result [read -nonewline $f]
		close $f
	}
	return $result
}

# @writefile filename value
#
# Creates the given file containing $value.
# Does not add an extra newline.
#
proc writefile {filename value} {
	set f [open $filename w]
	puts -nonewline $f $value
	close $f
}

proc quote-if-needed {str} {
	if {[string match {*[\" ]*} $str]} {
		return \"[string map [list \" \\" \\ \\\\] $str]\"
	}
	return $str
}

proc quote-argv {argv} {
	set args {}
	foreach arg $argv {
		lappend args [quote-if-needed $arg]
	}
	join $args
}

# @find-executable name
#
# Searches the path for an executable with the given name.
# Note that the name may include some parameters, e.g. "cc -mbig-endian",
# in which case the parameters are ignored.
# Returns 1 if found, or 0 if not.
#
proc find-executable {name} {
	# Ignore any parameters
	set name [lindex $name 0]
	if {$name eq ""} {
		# The empty string is never a valid executable
		return 0
	}
	foreach p [split-path] {
		dputs "Looking for $name in $p"
		set exec [file join $p $name]
		if {[file-isexec $exec]} {
			dputs "Found $name -> $exec"
			return 1
		}
	}
	return 0
}

# @find-an-executable ?-required? name ...
#
# Given a list of possible executable names,
# searches for one of these on the path.
#
# Returns the name found, or "" if none found.
# If the first parameter is '-required', an error is generated
# if no executable is found.
#
proc find-an-executable {args} {
	set required 0
	if {[lindex $args 0] eq "-required"} {
		set args [lrange $args 1 end]
		incr required
	}
	foreach name $args {
		if {[find-executable $name]} {
			return $name
		}
	}
	if {$required} {
		if {[llength $args] == 1} {
			user-error "failed to find: [join $args]"
		} else {
			user-error "failed to find one of: [join $args]"
		}
	}
	return ""
}

# @configlog msg
#
# Writes the given message to the configuration log, config.log
#
proc configlog {msg} {
	if {![info exists ::autosetup(logfh)]} {
		set ::autosetup(logfh) [open config.log w]
	}
	puts $::autosetup(logfh) $msg
}

# @msg-checking msg
#
# Writes the message with no newline to stdout.
#
proc msg-checking {msg} {
	if {$::autosetup(msg-quiet) == 0} {
		maybe-show-timestamp
		puts -nonewline $msg
		set ::autosetup(msg-checking) 1
	}
}

# @msg-result msg
#
# Writes the message to stdout.
#
proc msg-result {msg} {
	if {$::autosetup(msg-quiet) == 0} {
		maybe-show-timestamp
		puts $msg
		set ::autosetup(msg-checking) 0
		show-notices
	}
}

# @msg-quiet command ...
#
# msg-quiet evaluates it's arguments as a command with output
# from msg-checking and msg-result suppressed.
#
# This is useful if a check needs to run a subcheck which isn't
# of interest to the user.
proc msg-quiet {args} {
	incr ::autosetup(msg-quiet)
	set rc [uplevel 1 $args]
	incr ::autosetup(msg-quiet) -1
	return $rc
}

# Will be overridden by 'use misc'
proc error-stacktrace {msg} {
	return $msg
}

proc error-location {msg} {
	return $msg
}

##################################################################
#
# Debugging output
#
proc dputs {msg} {
	if {$::autosetup(debug)} {
		puts $msg
	}
}

##################################################################
#
# User and system warnings and errors
#
# Usage errors such as wrong command line options

# @user-error msg
#
# Indicate incorrect usage to the user, including if required components
# or features are not found.
# autosetup exits with a non-zero return code.
#
proc user-error {msg} {
	show-notices
	puts stderr "Error: $msg"
	puts stderr "Try: '[file tail $::autosetup(exe)] --help' for options"
	exit 1
}

# @user-notice msg
#
# Output the given message to stderr.
#
proc user-notice {msg} {
	lappend ::autosetup(notices) $msg
}

# Incorrect usage in the auto.def file. Identify the location.
proc autosetup-error {msg} {
	show-notices
	puts stderr [error-location $msg]
	exit 1
}

proc show-notices {} {
	if {$::autosetup(msg-checking)} {
		puts ""
		set ::autosetup(msg-checking) 0
	}
	flush stdout
	if {[info exists ::autosetup(notices)]} {
		puts stderr [join $::autosetup(notices) \n]
		unset ::autosetup(notices)
	}
}

proc maybe-show-timestamp {} {
	if {$::autosetup(msg-timing) && $::autosetup(msg-checking) == 0} {
		puts -nonewline [format {[%6.2f] } [expr {([clock millis] - $::autosetup(start)) % 10000 / 1000.0}]]
	}
}

proc autosetup_version {} {
	return "autosetup v$::autosetup(version)"
}

##################################################################
#
# Directory/path handling
#

proc realdir {dir} {
	set oldpwd [pwd]
	cd $dir
	set pwd [pwd]
	cd $oldpwd
	return $pwd
}

# Follow symlinks until we get to something which is not a symlink
proc realpath {path} {
	while {1} {
		if {[catch {
			set path [file link $path]
		}]} {
			# Not a link
			break
		}
	}
	return $path
}

# Convert absolute path, $path into a path relative
# to the given directory (or the current dir, if not given).
#
proc relative-path {path {pwd {}}} {
	set diff 0
	set same 0
	set newf {}
	set prefix {}
	set path [file-normalize $path]
	if {$pwd eq ""} {
		set pwd [pwd]
	} else {
		set pwd [file-normalize $pwd]
	}

	if {$path eq $pwd} {
		return .
	}

	# Try to make the filename relative to the current dir
	foreach p [split $pwd /] f [split $path /] {
		if {$p ne $f} {
			incr diff
		} elseif {!$diff} {
			incr same
		}
		if {$diff} {
			if {$p ne ""} {
				# Add .. for sibling or parent dir
				lappend prefix ..
			}
			if {$f ne ""} {
				lappend newf $f
			}
		}
	}
	if {$same == 1 || [llength $prefix] > 3} {
		return $path
	}

	file join [join $prefix /] [join $newf /]
}

# Add filename as a dependency to rerun autosetup
# The name will be normalised (converted to a full path)
#
proc autosetup_add_dep {filename} {
	lappend ::autosetup(deps) [file-normalize $filename]
}

##################################################################
#
# Library module support
#

# @use module ...
#
# Load the given library modules.
# e.g. use cc cc-shared
#
proc use {args} {
	foreach m $args {
		if {[info exists ::libmodule($m)]} {
			continue
		}
		set ::libmodule($m) 1
		if {[info exists ::modsource($m)]} {
			uplevel #0 eval $::modsource($m)
		} else {
			set source $::autosetup(libdir)/${m}.tcl
			if {[file exists $source]} {
				uplevel #0 [list source $source]
				autosetup_add_dep $source
			} else {
				puts "Looking for $source"
				autosetup-error "use: No such module: $m"
			}
		}
	}
}

# Initial settings
set autosetup(exe) $::argv0
set autosetup(istcl) 1
set autosetup(start) [clock millis]
set autosetup(installed) 0
set autosetup(msg-checking) 0
set autosetup(msg-quiet) 0

# Embedded modules are inserted below here
set autosetup(installed) 1
# ----- module asciidoc-formatting -----

set modsource(asciidoc-formatting) {
# Copyright (c) 2010 WorkWare Systems http://www.workware.net.au/
# All rights reserved

# Module which provides text formatting
# asciidoc format

use formatting

proc para {text} {
    regsub -all "\[ \t\n\]+" [string trim $text] " "
}
proc title {text} {
    underline [para $text] =
    nl
}
proc p {text} {
    puts [para $text]
    nl
}
proc code {text} {
    foreach line [parse_code_block $text] {
        puts "    $line"
    }
    nl
}
proc codelines {lines} {
    foreach line $lines {
        puts "    $line"
    }
    nl
}
proc nl {} {
    puts ""
}
proc underline {text char} {
    regexp "^(\[ \t\]*)(.*)" $text -> indent words
    puts $text
    puts $indent[string repeat $char [string length $words]]
}
proc section {text} {
    underline "[para $text]" -
    nl
}
proc subsection {text} {
    underline "$text" ~
    nl
}
proc bullet {text} {
    puts "* [para $text]"
}
proc indent {text} {
    puts " :: "
    puts [para $text]
}
proc defn {first args} {
    set sep ""
    if {$first ne ""} {
        puts "${first}::"
    } else {
        puts " :: "
    }
    set defn [string trim [join $args \n]]
    regsub -all "\n\n" $defn "\n ::\n" defn
    puts $defn
}
}

# ----- module formatting -----

set modsource(formatting) {
# Copyright (c) 2010 WorkWare Systems http://www.workware.net.au/
# All rights reserved

# Module which provides common text formatting

# This is designed for documenation which looks like:
# code {...}
# or
# code {
#    ...
#    ...
# }
# In the second case, we need to work out the indenting
# and strip it from all lines but preserve the remaining indenting.
# Note that all lines need to be indented with the same initial
# spaces/tabs.
#
# Returns a list of lines with the indenting removed.
#
proc parse_code_block {text} {
    # If the text begins with newline, take the following text,
    # otherwise just return the original
    if {![regexp "^\n(.*)" $text -> text]} {
        return [list [string trim $text]]
    }

    # And trip spaces off the end
    set text [string trimright $text]

    set min 100
    # Examine each line to determine the minimum indent
    foreach line [split $text \n] {
        if {$line eq ""} {
            # Ignore empty lines for the indent calculation
            continue
        }
        regexp "^(\[ \t\]*)" $line -> indent
        set len [string length $indent]
        if {$len < $min} {
            set min $len
        }
    }

    # Now make a list of lines with this indent removed
    set lines {}
    foreach line [split $text \n] {
        lappend lines [string range $line $min end]
    }

    # Return the result
    return $lines
}
}

# ----- module getopt -----

set modsource(getopt) {
# Copyright (c) 2006 WorkWare Systems http://www.workware.net.au/
# All rights reserved

# Simple getopt module

# Parse everything out of the argv list which looks like an option
# Knows about --enable-thing and --disable-thing as alternatives for --thing=0 or --thing=1
proc getopt {argvname} {
	upvar $argvname argv

	for {set i 0} {$i < [llength $argv]} {incr i} {
		set arg [lindex $argv $i]

		#dputs arg=$arg

		if {$arg eq "--"} {
			# End of options
			incr i
			break
		}

		if {[regexp {^--([^=][^=]+)=(.*)$} $arg -> name value]} {
			lappend opts($name) $value
		} elseif {[regexp {^--(enable-|disable-)?([^=]*)$} $arg -> prefix name]} {
			if {$prefix eq "disable-"} {
				set value 0
			} else {
				set value 1
			}
			lappend opts($name) $value
		} else {
			break
		}
	}

	#puts "getopt: argv=[join $argv] => [join [lrange $argv $i end]]"
	#parray opts

	set argv [lrange $argv $i end]

	return [array get opts]
}

proc opt_val {optarrayname options {default {}}} {
	upvar $optarrayname opts

	set result {}

	foreach o $options {
		if {[info exists opts($o)]} {
			lappend result {*}$opts($o)
		}
	}
	if {[llength $result] == 0} {
		return $default
	}
	return $result
}

proc opt_bool {optarrayname args} {
	upvar $optarrayname opts

	# Support the args being passed as a list
	if {[llength $args] == 1} {
		set args [lindex $args 0]
	}

	foreach o $args {
		if {[info exists opts($o)]} {
			if {"1" in $opts($o) || "yes" in $opts($o)} {
				return 1
			}
		}
	}
	return 0
}
}

# ----- module help -----

set modsource(help) {
# Copyright (c) 2010 WorkWare Systems http://workware.net.au/
# All rights reserved

# Module which provides usage, help and the command reference

proc autosetup_help {what} {
    use_pager

    puts "Usage: [file tail $::autosetup(exe)] \[options\] \[settings\]\n"
    puts "This is [autosetup_version], a build environment \"autoconfigurator\""
    puts "See the documentation online at http://msteveb.github.com/autosetup/\n"

    if {$what eq "local"} {
        if {[file exists $::autosetup(autodef)]} {
            # This relies on auto.def having a call to 'options'
            # which will display options and quit
            source $::autosetup(autodef)
        } else {
            options-show
        }
    } else {
        incr ::autosetup(showhelp)
        if {[catch {use $what}]} {
            user-error "Unknown module: $what"
        } else {
            options-show
        }
    }
    exit 0
}

# If not already paged and stdout is a tty, pipe the output through the pager
# This is done by reinvoking autosetup with --nopager added
proc use_pager {} {
    if {![opt-bool nopager] && [getenv PAGER ""] ne "" && ![string match "not a tty" [exec tty]]} {
        catch {
            exec [info nameofexecutable] $::argv0 --nopager {*}$::argv | [getenv PAGER] >@stdout <@stdin 2>/dev/null
        }
        exit 0
    }
}

# Outputs the autosetup references in one of several formats
proc autosetup_reference {{type text}} {

    use_pager

    switch -glob -- $type {
        wiki {use wiki-formatting}
        ascii* {use asciidoc-formatting}
        md - markdown {use markdown-formatting}
        default {use text-formatting}
    }

    title "[autosetup_version] -- Command Reference"

    section {Introduction}

    p {
        See http://msteveb.github.com/autosetup/ for the online documentation for 'autosetup'
    }

    p {
        'autosetup' provides a number of built-in commands which
        are documented below. These may be used from 'auto.def' to test
        for features, define variables, create files from templates and
        other similar actions.
    }

    automf_command_reference

    exit 0
}

proc autosetup_output_block {type lines} {
    if {[llength $lines]} {
        switch $type {
            code {
                codelines $lines
            }
            p {
                p [join $lines]
            }
            list {
                foreach line $lines {
                    bullet $line
                }
                nl
            }
        }
    }
}

# Generate a command reference from inline documentation
proc automf_command_reference {} {
    lappend files $::autosetup(prog)
    lappend files {*}[lsort [glob -nocomplain $::autosetup(libdir)/*.tcl]]

    section "Core Commands"
    set type p
    set lines {}
    set cmd {}

    foreach file $files {
        set f [open $file]
        while {![eof $f]} {
            set line [gets $f]

            # Find lines starting with "# @*" and continuing through the remaining comment lines
            if {![regexp {^# @(.*)} $line -> cmd]} {
                continue
            }

            # Synopsis or command?
            if {$cmd eq "synopsis:"} {
                section "Module: [file rootname [file tail $file]]"
            } else {
                subsection $cmd
            }

            set lines {}
            set type p

            # Now the description
            while {![eof $f]} {
                set line [gets $f]

                if {![regexp {^#(#)? ?(.*)} $line -> hash cmd]} {
                    break
                }
                if {$hash eq "#"} {
                    set t code
                } elseif {[regexp {^- (.*)} $cmd -> cmd]} {
                    set t list
                } else {
                    set t p
                }

                #puts "hash=$hash, oldhash=$oldhash, lines=[llength $lines], cmd=$cmd"

                if {$t ne $type || $cmd eq ""} {
                    # Finish the current block
                    autosetup_output_block $type $lines
                    set lines {}
                    set type $t
                }
                if {$cmd ne ""} {
                    lappend lines $cmd
                }
            }

            autosetup_output_block $type $lines
        }
        close $f
    }
}
}

# ----- module init -----

set modsource(init) {
# Copyright (c) 2010 WorkWare Systems http://www.workware.net.au/
# All rights reserved

# Module to help create auto.def and configure

proc autosetup_init {} {
	set create_configure 1
	if {[file exists configure]} {
		if {!$::autosetup(force)} {
			# Could this be an autosetup configure?
			if {![string match "*\nWRAPPER=*" [readfile configure]]} {
				puts "I see configure, but not created by autosetup, so I won't overwrite it."
				puts "Use autosetup --init --force to overwrite."
				set create_configure 0
			}
		} else {
			puts "I will overwrite the existing configure because you used --force."
		}
	} else {
		puts "I don't see configure, so I will create it."
	}
	if {$create_configure} {
		if {!$::autosetup(installed)} {
			user-notice "Warning: Initialising from the development version of autosetup"

			writefile configure "#!/bin/sh\nWRAPPER=\"\$0\" exec $::autosetup(dir)/autosetup \"\$@\"\n"
		} else {
			writefile configure \
{#!/bin/sh
dir="`dirname "$0"`/autosetup"
WRAPPER="$0" exec `"$dir/find-tclsh" || echo false` "$dir/autosetup" "$@"
}
		}
		catch {exec chmod 755 configure}
	}
	if {![file exists auto.def]} {
		puts "I don't see auto.def, so I will create a default one."
		writefile auto.def {# Initial auto.def created by 'autosetup --init'

use cc

# Add any user options here
options {
}

make-autoconf-h config.h
make-template Makefile.in
}
	}
	if {![file exists Makefile.in]} {
		puts "Note: I don't see Makefile.in. You will probably need to create one."
	}

	exit 0
}
}

# ----- module install -----

set modsource(install) {
# Copyright (c) 2006-2010 WorkWare Systems http://www.workware.net.au/
# All rights reserved

# Module which can install autosetup

proc autosetup_install {} {
	if {[catch {
		file mkdir autosetup

		set f [open autosetup/autosetup w]

		set publicmodules {}

		# First the main script, but only up until "CUT HERE"
		set in [open $::autosetup(dir)/autosetup]
		while {[gets $in buf] >= 0} {
			if {$buf ne "##-- CUT HERE --##"} {
				puts $f $buf
				continue
			}

			# Insert the static modules here
			# i.e. those which don't contain @synopsis:
			puts $f "set autosetup(installed) 1"
			foreach file [lsort [glob $::autosetup(libdir)/*.tcl]] {
				set buf [readfile $file]
				if {[string match "*\n# @synopsis:*" $buf]} {
					lappend publicmodules $file
					continue
				}
				set modname [file rootname [file tail $file]]
				puts $f "# ----- module $modname -----"
				puts $f "\nset modsource($modname) \{"
				puts $f $buf
				puts $f "\}\n"
			}
		}
		close $in
		close $f
		exec chmod 755 autosetup/autosetup

		# Install public modules
		foreach file $publicmodules {
			autosetup_install_file $file autosetup
		}

		# Install support files
		foreach file {config.guess config.sub jimsh0.c find-tclsh test-tclsh LICENSE} {
			autosetup_install_file $::autosetup(dir)/$file autosetup
		}
		exec chmod 755 autosetup/config.sub autosetup/config.guess autosetup/find-tclsh

		writefile autosetup/README.autosetup \
			"This is [autosetup_version]. See http://msteveb.github.com/autosetup/\n"

	} error]} {
		user-error "Failed to install autosetup: $error"
	}
	puts "Installed [autosetup_version] to autosetup/"
	catch {exec [info nameofexecutable] autosetup/autosetup --init >@stdout 2>@stderr}

	exit 0
}

# Append the contents of $file to filehandle $f
proc autosetup_install_append {f file} {
	set in [open $file]
	puts $f [read $in]
	close $in
}

proc autosetup_install_file {file dir} {
	if {![file exists $file]} {
		error "Missing installation file '$file'"
	}
	writefile [file join $dir [file tail $file]] [readfile $file]\n
}

if {$::autosetup(installed)} {
	user-error "autosetup can only be installed from development source, not from installed copy"
}
}

# ----- module markdown-formatting -----

set modsource(markdown-formatting) {
# Copyright (c) 2010 WorkWare Systems http://www.workware.net.au/
# All rights reserved

# Module which provides text formatting
# markdown format (kramdown syntax)

use formatting

proc para {text} {
    regsub -all "\[ \t\n\]+" [string trim $text] " " text
    regsub -all {([^a-zA-Z])'([^']*)'} $text {\1**`\2`**} text
    regsub -all {^'([^']*)'} $text {**`\1`**} text
    regsub -all {(http[^ \t\n]*)} $text {[\1](\1)} text
    return $text
}
proc title {text} {
    underline [para $text] =
    nl
}
proc p {text} {
    puts [para $text]
    nl
}
proc codelines {lines} {
    puts "~~~~~~~~~~~~"
    foreach line $lines {
        puts $line
    }
    puts "~~~~~~~~~~~~"
    nl
}
proc code {text} {
    puts "~~~~~~~~~~~~"
    foreach line [parse_code_block $text] {
        puts $line
    }
    puts "~~~~~~~~~~~~"
    nl
}
proc nl {} {
    puts ""
}
proc underline {text char} {
    regexp "^(\[ \t\]*)(.*)" $text -> indent words
    puts $text
    puts $indent[string repeat $char [string length $words]]
}
proc section {text} {
    underline "[para $text]" -
    nl
}
proc subsection {text} {
    puts "### `$text`"
    nl
}
proc bullet {text} {
    puts "* [para $text]"
}
proc defn {first args} {
    puts "^"
    set defn [string trim [join $args \n]]
    if {$first ne ""} {
        puts "**${first}**"
        puts -nonewline ": "
        regsub -all "\n\n" $defn "\n: " defn
    }
    puts "$defn"
}
}

# ----- module misc -----

set modsource(misc) {
# Copyright (c) 2007-2010 WorkWare Systems http://www.workware.net.au/
# All rights reserved

# Module containing misc procs useful to modules
# Largely for platform compatibility

set autosetup(istcl) [info exists ::tcl_library]
set autosetup(iswin) [string equal windows $tcl_platform(platform)]

if {$autosetup(iswin)} {
	# mingw/windows separates $PATH with semicolons
	# and doesn't have an executable bit
	proc split-path {} {
		split [getenv PATH .] {;}
	}
	proc file-isexec {exec} {
		# Basic test for windows. We ignore .bat
		if {[file isfile $exec] || [file isfile $exec.exe]} {
			return 1
		}
		return 0
	}
} else {
	# unix separates $PATH with colons and has and executable bit
	proc split-path {} {
		split [getenv PATH .] :
	}
	proc file-isexec {exec} {
		file executable $exec
	}
}

# Assume that exec can return stdout and stderr
proc exec-with-stderr {args} {
	exec {*}$args 2>@1
}

if {$autosetup(istcl)} {
	# Tcl doesn't have the env command
	proc getenv {name args} {
		if {[info exists ::env($name)]} {
			return $::env($name)
		}
		if {[llength $args]} {
			return [lindex $args 0]
		}
		return -code error "environment variable \"$name\" does not exist"
	}
} elseif {$autosetup(iswin)} {
	# On Windows, backslash convert all environment variables
	# (Assume that Tcl does this for us)
	proc getenv {name args} {
		string map {\\ /} [env $name {*}$args]
	}
	# Jim uses system() for exec under mingw, so
	# we need to fetch the output ourselves
	proc exec-with-stderr {args} {
			set tmpfile /tmp/autosetup.[format %05x [rand 10000]].tmp
			set rc [catch [list exec {*}$args >$tmpfile 2>&1] result]
			set result [readfile $tmpfile]
			file delete $tmpfile
			return -code $rc $result
	}
} else {
	# Jim on unix is simple
	alias getenv env
}

# In case 'file normalize' doesn't exist
#
proc file-normalize {path} {
	if {[catch {file normalize $path} result]} {
		if {$path eq ""} {
			return ""
		}
		set oldpwd [pwd]
		if {[file isdir $path]} {
			cd $path
			set result [pwd]
		} else {
			cd [file dirname $path]
			set result [file join [pwd] [file tail $path]]
		}
		cd $oldpwd
	}
	return $result
}

# If everything is working properly, the only errors which occur
# should be generated in user code (e.g. auto.def).
# By default, we only want to show the error location in user code.
# We use [info frame] to achieve this, but it works differently on Tcl and Jim.
#
# This is designed to be called for incorrect usage in auto.def, via autosetup-error
#
proc error-location {msg} {
	if {$::autosetup(debug)} {
		return -code error $msg
	}
	# Search back through the stack trace for the first error in a .def file
	for {set i 1} {$i < [info level]} {incr i} {
		if {$::autosetup(istcl)} {
			array set info [info frame -$i]
		} else {
			lassign [info frame -$i] info(caller) info(file) info(line)
		}
		if {[string match *.def $info(file)]} {
			return "[relative-path $info(file)]:$info(line): Error: $msg"
		}
		#puts "Skipping $info(file):$info(line)"
	}
	return $msg
}

# Similar to error-location, but called when user code generates an error
# In this case we want to show the stack trace in user code, but not in autosetup code
# (unless --debug is enabled)
#
proc error-stacktrace {msg} {
	if {$::autosetup(istcl)} {
		if {[regexp {file "([^ ]*)" line ([0-9]*)} $::errorInfo dummy file line]} {
			return "[relative-path $file]:$line $msg\n$::errorInfo"
		}
		return $::errorInfo
	} else {
		# Prepend a live stacktrace to the error stacktrace, omitting the current level
		set stacktrace [concat [info stacktrace] [lrange [stacktrace] 3 end]]

		if {!$::autosetup(debug)} {
			# Omit any levels from autosetup or with no file
			set newstacktrace {}
			foreach {p f l} $stacktrace {
				if {[string match "*autosetup" $f] || $f eq ""} {
					#puts "Skipping $p $f:$l"
					continue
				}
				lappend newstacktrace $p $f $l
			}
			set stacktrace $newstacktrace
		}

		# Convert filenames to relative paths
		set newstacktrace {}
		foreach {p f l} $stacktrace {
			lappend newstacktrace $p [relative-path $f] $l
		}
		lassign $newstacktrace p f l
		if {$f ne ""} {
			set prefix "$f:$l: "
		} else {
			set prefix ""
		}

		return "${prefix}Error: $msg\n[stackdump $newstacktrace]"
	}
}
}

# ----- module text-formatting -----

set modsource(text-formatting) {
# Copyright (c) 2010 WorkWare Systems http://www.workware.net.au/
# All rights reserved

# Module which provides text formatting

use formatting

proc wordwrap {text length {firstprefix ""} {nextprefix ""}} {
    set len 0
    set space $firstprefix
    foreach word [split $text] {
        set word [string trim $word]
        if {$word == ""} {
            continue
        }
        if {$len && [string length $space$word] + $len >= $length} {
            puts ""
            set len 0
            set space $nextprefix
        }
        incr len [string length $space$word]

        # Use man-page conventions for highlighting 'quoted' and *quoted*
        # single words.
        # Use x^Hx for *bold* and _^Hx for 'underline'.
        #
        # less and more will both understand this.
        # Pipe through 'col -b' to remove them.
        if {[regexp {^'(.*)'([^a-zA-Z0-9_]*)$} $word -> bareword dot]} {
            regsub -all . $bareword "_\b&" word
            append word $dot
        } elseif {[regexp {^[*](.*)[*]([^a-zA-Z0-9_]*)$} $word -> bareword dot]} {
            regsub -all . $bareword "&\b&" word
            append word $dot
        }
        puts -nonewline $space$word
        set space " "
    }
    if {$len} {
        puts ""
    }
}
proc title {text} {
    underline [string trim $text] =
    nl
}
proc p {text} {
    wordwrap $text 80
    nl
}
proc codelines {lines} {
    foreach line $lines {
        puts "    $line"
    }
    nl
}
proc nl {} {
    puts ""
}
proc underline {text char} {
    regexp "^(\[ \t\]*)(.*)" $text -> indent words
    puts $text
    puts $indent[string repeat $char [string length $words]]
}
proc section {text} {
    underline "[string trim $text]" -
    nl
}
proc subsection {text} {
    underline "$text" ~
    nl
}
proc bullet {text} {
    wordwrap $text 76 "  * " "    "
}
proc indent {text} {
    wordwrap $text 76 "    " "    "
}
proc defn {first args} {
    if {$first ne ""} {
        underline "    $first" ~
    }
    foreach p $args {
        if {$p ne ""} {
            indent $p
        }
    }
}
}

# ----- module wiki-formatting -----

set modsource(wiki-formatting) {
# Copyright (c) 2010 WorkWare Systems http://www.workware.net.au/
# All rights reserved

# Module which provides text formatting
# wiki.tcl.tk format output

use formatting

proc joinlines {text} {
    set lines {}
    foreach l [split [string trim $text] \n] {
        lappend lines [string trim $l]
    }
    join $lines
}
proc p {text} {
    puts [joinlines $text]
    puts ""
}
proc title {text} {
    puts "*** [joinlines $text] ***"
    puts ""
}
proc codelines {lines} {
    puts "======"
    foreach line $lines {
        puts "    $line"
    }
    puts "======"
}
proc code {text} {
    puts "======"
    foreach line [parse_code_block $text] {
        puts "    $line"
    }
    puts "======"
}
proc nl {} {
}
proc section {text} {
    puts "'''$text'''"
    puts ""
}
proc subsection {text} {
    puts "''$text''"
    puts ""
}
proc bullet {text} {
    puts "   * [joinlines $text]"
}
proc indent {text} {
    puts "    :    [joinlines $text]"
}
proc defn {first args} {
    if {$first ne ""} {
        indent '''$first'''
    }

    foreach p $args {
        p $p
    }
}
}


##################################################################
#
# Entry/Exit
#
if {$autosetup(debug)} {
	main $argv
}
if {[catch {main $argv} msg] == 1} {
	show-notices
	puts stderr [error-stacktrace $msg]
	if {!$autosetup(debug) && !$autosetup(istcl)} {
		puts stderr "Try: '[file tail $autosetup(exe)] --debug' for a full stack trace"
	}
	exit 1
}

# Copyright (c) 2011 WorkWare Systems http://www.workware.net.au/
# All rights reserved

# @synopsis:
#
# Provides a library of common tests on top of the 'cc' module.

use cc

module-options {}

# @cc-check-lfs
#
# The equivalent of the AC_SYS_LARGEFILE macro
# 
# defines 'HAVE_LFS' if LFS is available,
# and defines '_FILE_OFFSET_BITS=64' if necessary
#
# Returns 1 if 'LFS' is available or 0 otherwise
#
proc cc-check-lfs {} {
	cc-check-includes sys/types.h
	msg-checking "Checking if -D_FILE_OFFSET_BITS=64 is needed..."
	set lfs 1
	if {[msg-quiet cc-with {-includes sys/types.h} {cc-check-sizeof off_t}] == 8} {
		msg-result no
	} elseif {[msg-quiet cc-with {-includes sys/types.h -cflags -D_FILE_OFFSET_BITS=64} {cc-check-sizeof off_t}] == 8} {
		define _FILE_OFFSET_BITS 64
		msg-result yes
	} else {
		set lfs 0
		msg-result none
	}
	define-feature lfs $lfs
	return $lfs
}

# @cc-check-endian
#
# The equivalent of the AC_C_BIGENDIAN macro
# 
# defines 'HAVE_BIG_ENDIAN' if endian is known to be big,
# or 'HAVE_LITTLE_ENDIAN' if endian is known to be little.
#
# Returns 1 if determined, or 0 if not.
#
proc cc-check-endian {} {
	cc-check-includes sys/types.h sys/param.h
	set rc 0
	msg-checking "Checking endian..."
	cc-with {-includes {sys/types.h sys/param.h}} {
		if {[cctest -code {
			#if! defined(BIG_ENDIAN) || !defined(BYTE_ORDER)
				#error unknown
			#elif BYTE_ORDER != BIG_ENDIAN
				#error little
			#endif
		}]} {
			define-feature big-endian
			msg-result "big"
			set rc 1
		} elseif {[cctest -code {
			#if! defined(LITTLE_ENDIAN) || !defined(BYTE_ORDER)
				#error unknown
			#elif BYTE_ORDER != LITTLE_ENDIAN
				#error big
			#endif
		}]} {
			define-feature little-endian
			msg-result "little"
			set rc 1
		} else {
			msg-result "unknown"
		}
	}
	return $rc
}

# Copyright (c) 2010 WorkWare Systems http://www.workware.net.au/
# All rights reserved

# @synopsis:
#
# The 'cc-shared' module provides support for shared libraries and shared objects.
# It defines the following variables:
#
## SH_CFLAGS         Flags to use compiling sources destined for a shared library
## SH_LDFLAGS        Flags to use linking a shared library
## SHOBJ_CFLAGS      Flags to use compiling sources destined for a shared object
## SHOBJ_LDFLAGS     Flags to use linking a shared object
## SH_LINKFLAGS      Flags to use linking an executable which will load shared objects
## LD_LIBRARY_PATH   Environment variable which specifies path to shared libraries

module-options {}

foreach i {SH_LINKFLAGS SH_CFLAGS SH_LDFLAGS SHOBJ_CFLAGS SHOBJ_LDFLAGS} {
	define $i ""
}

define LD_LIBRARY_PATH LD_LIBRARY_PATH

switch -glob -- [get-define host] {
	*-*-darwin* {
		define SH_CFLAGS -dynamic
		define SH_LDFLAGS "-dynamiclib"
		define SHOBJ_CFLAGS "-dynamic -fno-common"
		define SHOBJ_LDFLAGS "-bundle -undefined dynamic_lookup"
		define LD_LIBRARY_PATH DYLD_LIBRARY_PATH
	}
	*-*-ming* {
		define SH_LDFLAGS -shared
		define SHOBJ_LDFLAGS -shared
	}
	*-*-cygwin {
		define SH_LDFLAGS -shared
		define SHOBJ_LDFLAGS -shared
	}
	* {
		# Generic Unix settings
		define SH_LINKFLAGS -rdynamic
		define SH_CFLAGS -fPIC
		define SH_LDFLAGS -shared
		define SHOBJ_CFLAGS -fPIC
		define SHOBJ_LDFLAGS "-shared -nostartfiles"
	}
}

# Copyright (c) 2010 WorkWare Systems http://www.workware.net.au/
# All rights reserved

# @synopsis:
#
# The 'cc' module supports checking various 'features' of the C or C++
# compiler/linker environment. Common commands are cc-check-includes,
# cc-check-types, cc-check-functions, cc-with, make-autoconf-h and make-template.
#
# The following environment variables are used if set:
#
## CC       - C compiler
## CXX      - C++ compiler
## CCACHE   - Set to "none" to disable automatic use of ccache
## CFLAGS   - Additional C compiler flags
## CXXFLAGS - Additional C++ compiler flags
## LDFLAGS  - Additional compiler flags during linking
## LIBS     - Additional libraries to use (for all tests)
## CROSS    - Tool prefix for cross compilation
#
# The following variables are defined from the corresponding
# environment variables if set.
#
## CPPFLAGS
## LINKFLAGS
## CC_FOR_BUILD
## LD

use system

module-options {}

# Note that the return code is not meaningful
proc cc-check-something {name code} {
	uplevel 1 $code
}

# Checks for the existence of the given function by linking
#
proc cctest_function {function} {
	cctest -link 1 -declare "extern void $function\(void);" -code "$function\();"
}

# Checks for the existence of the given type by compiling
proc cctest_type {type} {
	cctest -code "$type _x;"
}

# Checks for the existence of the given type/structure member.
# e.g. "struct stat.st_mtime"
proc cctest_member {struct_member} {
	lassign [split $struct_member .] struct member
	cctest -code "static $struct _s; return sizeof(_s.$member);"
}

# Checks for the existence of the given define by compiling
#
proc cctest_define {name} {
	cctest -code "#ifndef $name\n#error not defined\n#endif"
}

# Checks for the existence of the given name either as
# a macro (#define) or an rvalue (such as an enum)
#
proc cctest_decl {name} {
	cctest -code "#ifndef $name\n(void)$name;\n#endif"
}

# @cc-check-sizeof type ...
#
# Checks the size of the given types (between 1 and 32, inclusive).
# Defines a variable with the size determined, or "unknown" otherwise.
# e.g. for type 'long long', defines SIZEOF_LONG_LONG.
# Returns the size of the last type.
#
proc cc-check-sizeof {args} {
	foreach type $args {
		msg-checking "Checking for sizeof $type..."
		set size unknown
		# Try the most common sizes first
		foreach i {4 8 1 2 16 32} {
			if {[cctest -code "static int _x\[sizeof($type) == $i ? 1 : -1\] = { 1 };"]} {
				set size $i
				break
			}
		}
		msg-result $size
		set define [feature-define-name $type SIZEOF_]
		define $define $size
	}
	# Return the last result
	get-define $define
}

# Checks for each feature in $list by using the given script.
#
# When the script is evaluated, $each is set to the feature
# being checked, and $extra is set to any additional cctest args.
#
# Returns 1 if all features were found, or 0 otherwise.
proc cc-check-some-feature {list script} {
	set ret 1
	foreach each $list {
		if {![check-feature $each $script]} {
			set ret 0
		}
	}
	return $ret
}

# @cc-check-includes includes ...
#
# Checks that the given include files can be used
proc cc-check-includes {args} {
	cc-check-some-feature $args {
		cctest -includes $each
	}
}

# @cc-check-types type ...
#
# Checks that the types exist.
proc cc-check-types {args} {
	cc-check-some-feature $args {
		cctest_type $each
	}
}

# @cc-check-defines define ...
#
# Checks that the given preprocessor symbol is defined
proc cc-check-defines {args} {
	cc-check-some-feature $args {
		cctest_define $each
	}
}

# @cc-check-decls name ...
#
# Checks that each given name is either a preprocessor symbol or rvalue
# such as an enum. Note that the define used for a decl is HAVE_DECL_xxx
# rather than HAVE_xxx
proc cc-check-decls {args} {
	set ret 1
	foreach name $args {
		msg-checking "Checking for $name..."
		set r [cctest_decl $name]
		define-feature "decl $name" $r
		if {$r} {
			msg-result "ok"
		} else {
			msg-result "not found"
			set ret 0
		}
	}
	return $ret
}

# @cc-check-functions function ...
#
# Checks that the given functions exist (can be linked)
proc cc-check-functions {args} {
	cc-check-some-feature $args {
		cctest_function $each
	}
}

# @cc-check-members type.member ...
#
# Checks that the given type/structure members exist.
# A structure member is of the form "struct stat.st_mtime"
proc cc-check-members {args} {
	cc-check-some-feature $args {
		cctest_member $each
	}
}

# @cc-check-function-in-lib function libs ?otherlibs?
#
# Checks that the given given function can be found in one of the libs.
#
# First checks for no library required, then checks each of the libraries
# in turn.
#
# If the function is found, the feature is defined and lib_$function is defined
# to -l$lib where the function was found, or "" if no library required.
# In addition, -l$lib is added to the LIBS define.
#
# If additional libraries may be needed for linking, they should be specified
# as $extralibs as "-lotherlib1 -lotherlib2".
# These libraries are not automatically added to LIBS.
#
# Returns 1 if found or 0 if not.
# 
proc cc-check-function-in-lib {function libs {otherlibs {}}} {
	msg-checking "Checking libs for $function..."
	set found 0
	cc-with [list -libs $otherlibs] {
		if {[cctest_function $function]} {
			msg-result "none needed"
			define lib_$function ""
			incr found
		} else {
			foreach lib $libs {
				cc-with [list -libs -l$lib] {
					if {[cctest_function $function]} {
						msg-result -l$lib
						define lib_$function -l$lib
						define-append LIBS -l$lib
						incr found
						break
					}
				}
			}
		}
	}
	if {$found} {
		define [feature-define-name $function]
	} else {
		msg-result "no"
	}
	return $found
}

# @cc-check-tools tool ...
#
# Checks for existence of the given compiler tools, taking
# into account any cross compilation prefix.
#
# For example, when checking for "ar", first AR is checked on the command
# line and then in the environment. If not found, "${host}-ar" or
# simply "ar" is assumed depending upon whether cross compiling.
# The path is searched for this executable, and if found AR is defined
# to the executable name.
#
# It is an error if the executable is not found.
#
proc cc-check-tools {args} {
	foreach tool $args {
		set TOOL [string toupper $tool]
		set exe [get-env $TOOL [get-define cross]$tool]
		if {![find-executable $exe]} {
			user-error "Failed to find $exe"
		}
		define $TOOL $exe
	}
}

# @cc-check-progs prog ...
#
# Checks for existence of the given executables on the path.
#
# For example, when checking for "grep", the path is searched for
# the executable, 'grep', and if found GREP is defined as "grep".
#
# It the executable is not found, the variable is defined as false.
# Returns 1 if all programs were found, or 0 otherwise.
#
proc cc-check-progs {args} {
	set failed 0
	foreach prog $args {
		set PROG [string toupper $prog]
		msg-checking "Checking for $prog..."
		if {![find-executable $prog]} {
			msg-result no
			define $PROG false
			incr failed
		} else {
			msg-result ok
			define $PROG $prog
		}
	}
	expr {!$failed}
}

# Adds the given settings to $::autosetup(ccsettings) and
# returns the old settings.
#
proc cc-add-settings {settings} {
	if {[llength $settings] % 2} {
		autosetup-error "settings list is missing a value: $settings"
	}

	set prev [cc-get-settings]
	# workaround a bug in some versions of jimsh by forcing
	# conversion of $prev to a list
	llength $prev

	array set new $prev

	foreach {name value} $settings {
		switch -exact -- $name {
			-cflags - -includes {
				# These are given as lists
				lappend new($name) {*}$value
			}
			-declare {
				lappend new($name) $value
			}
			-libs {
				# Note that new libraries are added before previous libraries
				set new($name) [list {*}$value {*}$new($name)]
			}
			-link - -lang {
				set new($name) $value
			}
			-source - -sourcefile - -code {
				# XXX: These probably are only valid directly from cctest
				set new($name) $value
			}
			default {
				autosetup-error "unknown cctest setting: $name"
			}
		}
	}

	cc-store-settings [array get new]

	return $prev
}

proc cc-store-settings {new} {
	set ::autosetup(ccsettings) $new
}

proc cc-get-settings {} {
	return $::autosetup(ccsettings)
}

# Similar to cc-add-settings, but each given setting
# simply replaces the existing value.
#
# Returns the previous settings
proc cc-update-settings {args} {
	set prev [cc-get-settings]
	array set new $prev

	foreach {name value} $args {
		set new($name) $value
	}
	cc-store-settings $new

	return $prev
}

# @cc-with settings ?{ script }?
#
# Sets the given 'cctest' settings and then runs the tests in 'script'.
# Note that settings such as -lang replace the current setting, while
# those such as -includes are appended to the existing setting.
#
# If no script is given, the settings become the default for the remainder
# of the auto.def file.
#
## cc-with {-lang c++} {
##   # This will check with the C++ compiler
##   cc-check-types bool
##   cc-with {-includes signal.h} {
##     # This will check with the C++ compiler, signal.h and any existing includes.
##     ...
##   }
##   # back to just the C++ compiler
## }
#
# The -libs setting is special in that newer values are added *before* earlier ones.
#
## cc-with {-libs {-lc -lm}} {
##   cc-with {-libs -ldl} {
##     cctest -libs -lsocket ...
##     # libs will be in this order: -lsocket -ldl -lc -lm
##   }
## }
proc cc-with {settings args} {
	if {[llength $args] == 0} {
		cc-add-settings $settings
	} elseif {[llength $args] > 1} {
		autosetup-error "usage: cc-with settings ?script?"
	} else {
		set save [cc-add-settings $settings]
		set rc [catch {uplevel 1 [lindex $args 0]} result info]
		cc-store-settings $save
		if {$rc != 0} {
			return $result -code [dict get $info -code]
		}
		return $result
	}
}

# @cctest ?settings?
# 
# Low level C compiler checker. Compiles and or links a small C program
# according to the arguments and returns 1 if OK, or 0 if not.
#
# Supported settings are:
#
## -cflags cflags      A list of flags to pass to the compiler
## -includes list      A list of includes, e.g. {stdlib.h stdio.h}
## -declare code       Code to declare before main()
## -link 1             Don't just compile, link too
## -lang c|c++         Use the C (default) or C++ compiler
## -libs liblist       List of libraries to link, e.g. {-ldl -lm}
## -code code          Code to compile in the body of main()
## -source code        Compile a complete program. Ignore -includes, -declare and -code
## -sourcefile file    Shorthand for -source [readfile [get-define srcdir]/$file]
#
# Unless -source or -sourcefile is specified, the C program looks like:
#
## #include <firstinclude>   /* same for remaining includes in the list */
##
## declare-code              /* any code in -declare, verbatim */
##
## int main(void) {
##   code                    /* any code in -code, verbatim */
##   return 0;
## }
#
# Any failures are recorded in 'config.log'
#
proc cctest {args} {
	set src conftest__.c
	set tmp conftest__.o

	# Easiest way to merge in the settings
	cc-with $args {
		array set opts [cc-get-settings]
	}

	if {[info exists opts(-sourcefile)]} {
		set opts(-source) [readfile [get-define srcdir]/$opts(-sourcefile) "#error can't find $opts(-sourcefile)"]
	}
	if {[info exists opts(-source)]} {
		set lines $opts(-source)
	} else {
		foreach i $opts(-includes) {
			if {$opts(-code) ne "" && ![feature-checked $i]} {
				# Compiling real code with an unchecked header file
				# Quickly (and silently) check for it now

				# Remove all -includes from settings before checking
				set saveopts [cc-update-settings -includes {}]
				msg-quiet cc-check-includes $i
				cc-store-settings $saveopts
			}
			if {$opts(-code) eq "" || [have-feature $i]} {
				lappend source "#include <$i>"
			}
		}
		lappend source {*}$opts(-declare)
		lappend source "int main(void) {"
		lappend source $opts(-code)
		lappend source "return 0;"
		lappend source "}"

		set lines [join $source \n]
	}

	# Build the command line
	set cmdline {}
	lappend cmdline {*}[get-define CCACHE]
	switch -exact -- $opts(-lang) {
		c++ {
			lappend cmdline {*}[get-define CXX] {*}[get-define CXXFLAGS]
		}
		c {
			lappend cmdline {*}[get-define CC] {*}[get-define CFLAGS]
		}
		default {
			autosetup-error "cctest called with unknown language: $opts(-lang)"
		}
	}

	if {!$opts(-link)} {
		lappend cmdline -c
	}
	lappend cmdline {*}$opts(-cflags)

	switch -glob -- [get-define host] {
		*-*-darwin* {
			# Don't generate .dSYM directories
			lappend cmdline -gstabs
		}
	}
	lappend cmdline $src -o $tmp {*}$opts(-libs)

	# At this point we have the complete command line and the
	# complete source to be compiled. Get the result from cache if
	# we can
	if {[info exists ::cc_cache($cmdline,$lines)]} {
		msg-checking "(cached) "
		set ok $::cc_cache($cmdline,$lines)
		if {$::autosetup(debug)} {
			configlog "From cache (ok=$ok): [join $cmdline]"
			configlog "============"
			configlog $lines
			configlog "============"
		}
		return $ok
	}

	writefile $src $lines\n

	set ok 1
	if {[catch {exec-with-stderr {*}$cmdline} result errinfo]} {
		configlog "Failed: [join $cmdline]"
		configlog $result
		configlog "============"
		configlog "The failed code was:"
		configlog $lines
		configlog "============"
		set ok 0
	} elseif {$::autosetup(debug)} {
		configlog "Compiled OK: [join $cmdline]"
		configlog "============"
		configlog $lines
		configlog "============"
	}
	file delete $src
	file delete $tmp

	# cache it
	set ::cc_cache($cmdline,$lines) $ok

	return $ok
}

# @make-autoconf-h outfile ?auto-patterns=HAVE_*? ?bare-patterns=SIZEOF_*?
#
# Deprecated - see make-config-header
proc make-autoconf-h {file {autopatterns {HAVE_*}} {barepatterns {SIZEOF_* HAVE_DECL_*}}} {
	user-notice "*** make-autoconf-h is deprecated -- use make-config-header instead"
	make-config-header $file -auto $autopatterns -bare $barepatterns
}

# @make-config-header outfile ?-auto patternlist? ?-bare patternlist? ?-none patternlist? ?-str patternlist? ...
#
# Examines all defined variables which match the given patterns
# and writes an include file, $file, which defines each of these.
# Variables which match '-auto' are output as follows:
# - defines which have the value "0" are ignored.
# - defines which have integer values are defined as the integer value.
# - any other value is defined as a string, e.g. "value"
# Variables which match '-bare' are defined as-is.
# Variables which match '-str' are defined as a string, e.g. "value"
# Variables which match '-none' are omitted.
#
# Note that order is important. The first pattern which matches is selected
# Default behaviour is:
#
#  -bare {SIZEOF_* HAVE_DECL_*} -auto HAVE_* -none *
#
# If the file would be unchanged, it is not written.
proc make-config-header {file args} {
	set guard _[string toupper [regsub -all {[^a-zA-Z0-9]} [file tail $file] _]]
	file mkdir [file dirname $file]
	set lines {}
	lappend lines "#ifndef $guard"
	lappend lines "#define $guard"

	# Add some defaults
	lappend args -bare {SIZEOF_* HAVE_DECL_*} -auto HAVE_*

	foreach n [lsort [dict keys [all-defines]]] {
		set value [get-define $n]
		set type [calc-define-output-type $n $args]
		switch -exact -- $type {
			-bare {
				# Just output the value unchanged
			}
			-none {
				continue
			}
			-str {
				set value \"$value\"
			}
			-auto {
				# Automatically determine the type
				if {$value eq "0"} {
					lappend lines "/* #undef $n */"
					continue
				}
				if {![string is integer -strict $value]} {
					set value \"$value\"
				}
			}
			"" {
				continue
			}
			default {
				autosetup-error "Unknown type in make-config-header: $type"
			}
		}
		lappend lines "#define $n $value"
	}
	lappend lines "#endif"
	set buf [join $lines \n]
	write-if-changed $file $buf {
		msg-result "Created $file"
	}
}

proc calc-define-output-type {name spec} {
	foreach {type patterns} $spec {
		foreach pattern $patterns {
			if {[string match $pattern $name]} {
				return $type
			}
		}
	}
	return ""
}

# Initialise some values from the environment or commandline or default settings
foreach i {LDFLAGS LIBS CPPFLAGS LINKFLAGS {CFLAGS "-g -O2"}} {
	lassign $i var default
	define $var [get-env $var $default]
}

if {[env-is-set CC]} {
	# Set by the user, so don't try anything else
	set try [list [get-env CC ""]]
} else {
	# Try some reasonable options
	set try [list [get-define cross]cc [get-define cross]gcc]
}
define CC [find-an-executable {*}$try]
if {[get-define CC] eq ""} {
	user-error "Could not find a C compiler. Tried: [join $try ", "]"
}

define CPP [get-env CPP "[get-define CC] -E"]

# XXX: Could avoid looking for a C++ compiler until requested
# Note that if CXX isn't found, we just set it to "false". It might not be needed.
if {[env-is-set CXX]} {
	define CXX [find-an-executable -required [get-env CXX ""]]
} else {
	define CXX [find-an-executable [get-define cross]c++ [get-define cross]g++ false]
}

# CXXFLAGS default to CFLAGS if not specified
define CXXFLAGS [get-env CXXFLAGS [get-define CFLAGS]]

cc-check-tools ld

# May need a CC_FOR_BUILD, so look for one
define CC_FOR_BUILD [find-an-executable [get-env CC_FOR_BUILD ""] cc gcc false]

if {[get-define CC] eq ""} {
	user-error "Could not find a C compiler. Tried: [join $try ", "]"
}

define CCACHE [find-an-executable [get-env CCACHE ccache]]

# Initial cctest settings
cc-store-settings {-cflags {} -includes {} -declare {} -link 0 -lang c -libs {} -code {}}

msg-result "C compiler...[get-define CCACHE] [get-define CC] [get-define CFLAGS]"
if {[get-define CXX] ne "false"} {
	msg-result "C++ compiler...[get-define CCACHE] [get-define CXX] [get-define CXXFLAGS]"
}
msg-result "Build C compiler...[get-define CC_FOR_BUILD]"

if {![cc-check-includes stdlib.h]} {
	user-error "Compiler does not work. See config.log"
}

#! /bin/sh
# Attempt to guess a canonical system name.
#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
#   Free Software Foundation, Inc.

timestamp='2010-09-24'

# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
# 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.


# Originally written by Per Bothner.  Please send patches (context
# diff format) to <config-patches@gnu.org> and include a ChangeLog
# entry.
#
# This script attempts to guess a canonical system name similar to
# config.sub.  If it succeeds, it prints the system name on stdout, and
# exits with 0.  Otherwise, it exits with 1.
#
# You can get the latest version of this script from:
# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD

me=`echo "$0" | sed -e 's,.*/,,'`

usage="\
Usage: $0 [OPTION]

Output the configuration name of the system \`$me' is run on.

Operation modes:
  -h, --help         print this help, then exit
  -t, --time-stamp   print date of last modification, then exit
  -v, --version      print version number, then exit

Report bugs and patches to <config-patches@gnu.org>."

version="\
GNU config.guess ($timestamp)

Originally written by Per Bothner.
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free
Software Foundation, Inc.

This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."

help="
Try \`$me --help' for more information."

# Parse command line
while test $# -gt 0 ; do
  case $1 in
    --time-stamp | --time* | -t )
       echo "$timestamp" ; exit ;;
    --version | -v )
       echo "$version" ; exit ;;
    --help | --h* | -h )
       echo "$usage"; exit ;;
    -- )     # Stop option processing
       shift; break ;;
    - )	# Use stdin as input.
       break ;;
    -* )
       echo "$me: invalid option $1$help" >&2
       exit 1 ;;
    * )
       break ;;
  esac
done

if test $# != 0; then
  echo "$me: too many arguments$help" >&2
  exit 1
fi

trap 'exit 1' HUP INT TERM

# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
# compiler to aid in system detection is discouraged as it requires
# temporary files to be created and, as you can see below, it is a
# headache to deal with in a portable fashion.

# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
# use `HOST_CC' if defined, but it is deprecated.

# Portable tmp directory creation inspired by the Autoconf team.

set_cc_for_build='
trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" HUP INT PIPE TERM ;
: ${TMPDIR=/tmp} ;
 { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
 { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
 { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
 { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
dummy=$tmp/dummy ;
tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
case $CC_FOR_BUILD,$HOST_CC,$CC in
 ,,)    echo "int x;" > $dummy.c ;
	for c in cc gcc c89 c99 ; do
	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
	     CC_FOR_BUILD="$c"; break ;
	  fi ;
	done ;
	if test x"$CC_FOR_BUILD" = x ; then
	  CC_FOR_BUILD=no_compiler_found ;
	fi
	;;
 ,,*)   CC_FOR_BUILD=$CC ;;
 ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
esac ; set_cc_for_build= ;'

# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (ghazi@noc.rutgers.edu 1994-08-24)
if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
	PATH=$PATH:/.attbin ; export PATH
fi

UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown

# Note: order is significant - the case branches are not exclusive.

case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
    *:NetBSD:*:*)
	# NetBSD (nbsd) targets should (where applicable) match one or
	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
	# switched to ELF, *-*-netbsd* would select the old
	# object file format.  This provides both forward
	# compatibility and a consistent mechanism for selecting the
	# object file format.
	#
	# Note: NetBSD doesn't particularly care about the vendor
	# portion of the name.  We always set it to "unknown".
	sysctl="sysctl -n hw.machine_arch"
	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
	case "${UNAME_MACHINE_ARCH}" in
	    armeb) machine=armeb-unknown ;;
	    arm*) machine=arm-unknown ;;
	    sh3el) machine=shl-unknown ;;
	    sh3eb) machine=sh-unknown ;;
	    sh5el) machine=sh5le-unknown ;;
	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
	esac
	# The Operating System including object format, if it has switched
	# to ELF recently, or will in the future.
	case "${UNAME_MACHINE_ARCH}" in
	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
		eval $set_cc_for_build
		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
			| grep -q __ELF__
		then
		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
		    # Return netbsd for either.  FIX?
		    os=netbsd
		else
		    os=netbsdelf
		fi
		;;
	    *)
	        os=netbsd
		;;
	esac
	# The OS release
	# Debian GNU/NetBSD machines have a different userland, and
	# thus, need a distinct triplet. However, they do not need
	# kernel version information, so it can be replaced with a
	# suitable tag, in the style of linux-gnu.
	case "${UNAME_VERSION}" in
	    Debian*)
		release='-gnu'
		;;
	    *)
		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
		;;
	esac
	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
	# contains redundant information, the shorter form:
	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
	echo "${machine}-${os}${release}"
	exit ;;
    *:OpenBSD:*:*)
	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
	exit ;;
    *:ekkoBSD:*:*)
	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
	exit ;;
    *:SolidBSD:*:*)
	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
	exit ;;
    macppc:MirBSD:*:*)
	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
	exit ;;
    *:MirBSD:*:*)
	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
	exit ;;
    alpha:OSF1:*:*)
	case $UNAME_RELEASE in
	*4.0)
		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
		;;
	*5.*)
	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
		;;
	esac
	# According to Compaq, /usr/sbin/psrinfo has been available on
	# OSF/1 and Tru64 systems produced since 1995.  I hope that
	# covers most systems running today.  This code pipes the CPU
	# types through head -n 1, so we only detect the type of CPU 0.
	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
	case "$ALPHA_CPU_TYPE" in
	    "EV4 (21064)")
		UNAME_MACHINE="alpha" ;;
	    "EV4.5 (21064)")
		UNAME_MACHINE="alpha" ;;
	    "LCA4 (21066/21068)")
		UNAME_MACHINE="alpha" ;;
	    "EV5 (21164)")
		UNAME_MACHINE="alphaev5" ;;
	    "EV5.6 (21164A)")
		UNAME_MACHINE="alphaev56" ;;
	    "EV5.6 (21164PC)")
		UNAME_MACHINE="alphapca56" ;;
	    "EV5.7 (21164PC)")
		UNAME_MACHINE="alphapca57" ;;
	    "EV6 (21264)")
		UNAME_MACHINE="alphaev6" ;;
	    "EV6.7 (21264A)")
		UNAME_MACHINE="alphaev67" ;;
	    "EV6.8CB (21264C)")
		UNAME_MACHINE="alphaev68" ;;
	    "EV6.8AL (21264B)")
		UNAME_MACHINE="alphaev68" ;;
	    "EV6.8CX (21264D)")
		UNAME_MACHINE="alphaev68" ;;
	    "EV6.9A (21264/EV69A)")
		UNAME_MACHINE="alphaev69" ;;
	    "EV7 (21364)")
		UNAME_MACHINE="alphaev7" ;;
	    "EV7.9 (21364A)")
		UNAME_MACHINE="alphaev79" ;;
	esac
	# A Pn.n version is a patched version.
	# A Vn.n version is a released version.
	# A Tn.n version is a released field test version.
	# A Xn.n version is an unreleased experimental baselevel.
	# 1.2 uses "1.2" for uname -r.
	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
	exit ;;
    Alpha\ *:Windows_NT*:*)
	# How do we know it's Interix rather than the generic POSIX subsystem?
	# Should we change UNAME_MACHINE based on the output of uname instead
	# of the specific Alpha model?
	echo alpha-pc-interix
	exit ;;
    21064:Windows_NT:50:3)
	echo alpha-dec-winnt3.5
	exit ;;
    Amiga*:UNIX_System_V:4.0:*)
	echo m68k-unknown-sysv4
	exit ;;
    *:[Aa]miga[Oo][Ss]:*:*)
	echo ${UNAME_MACHINE}-unknown-amigaos
	exit ;;
    *:[Mm]orph[Oo][Ss]:*:*)
	echo ${UNAME_MACHINE}-unknown-morphos
	exit ;;
    *:OS/390:*:*)
	echo i370-ibm-openedition
	exit ;;
    *:z/VM:*:*)
	echo s390-ibm-zvmoe
	exit ;;
    *:OS400:*:*)
        echo powerpc-ibm-os400
	exit ;;
    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
	echo arm-acorn-riscix${UNAME_RELEASE}
	exit ;;
    arm:riscos:*:*|arm:RISCOS:*:*)
	echo arm-unknown-riscos
	exit ;;
    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
	echo hppa1.1-hitachi-hiuxmpp
	exit ;;
    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
	if test "`(/bin/universe) 2>/dev/null`" = att ; then
		echo pyramid-pyramid-sysv3
	else
		echo pyramid-pyramid-bsd
	fi
	exit ;;
    NILE*:*:*:dcosx)
	echo pyramid-pyramid-svr4
	exit ;;
    DRS?6000:unix:4.0:6*)
	echo sparc-icl-nx6
	exit ;;
    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
	case `/usr/bin/uname -p` in
	    sparc) echo sparc-icl-nx7; exit ;;
	esac ;;
    s390x:SunOS:*:*)
	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit ;;
    sun4H:SunOS:5.*:*)
	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit ;;
    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit ;;
    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
	echo i386-pc-auroraux${UNAME_RELEASE}
	exit ;;
    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
	eval $set_cc_for_build
	SUN_ARCH="i386"
	# If there is a compiler, see if it is configured for 64-bit objects.
	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
	# This test works for both compilers.
	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
		grep IS_64BIT_ARCH >/dev/null
	    then
		SUN_ARCH="x86_64"
	    fi
	fi
	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit ;;
    sun4*:SunOS:6*:*)
	# According to config.sub, this is the proper way to canonicalize
	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
	# it's likely to be more like Solaris than SunOS4.
	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit ;;
    sun4*:SunOS:*:*)
	case "`/usr/bin/arch -k`" in
	    Series*|S4*)
		UNAME_RELEASE=`uname -v`
		;;
	esac
	# Japanese Language versions have a version number like `4.1.3-JL'.
	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
	exit ;;
    sun3*:SunOS:*:*)
	echo m68k-sun-sunos${UNAME_RELEASE}
	exit ;;
    sun*:*:4.2BSD:*)
	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
	case "`/bin/arch`" in
	    sun3)
		echo m68k-sun-sunos${UNAME_RELEASE}
		;;
	    sun4)
		echo sparc-sun-sunos${UNAME_RELEASE}
		;;
	esac
	exit ;;
    aushp:SunOS:*:*)
	echo sparc-auspex-sunos${UNAME_RELEASE}
	exit ;;
    # The situation for MiNT is a little confusing.  The machine name
    # can be virtually everything (everything which is not
    # "atarist" or "atariste" at least should have a processor
    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
    # to the lowercase version "mint" (or "freemint").  Finally
    # the system name "TOS" denotes a system which is actually not
    # MiNT.  But MiNT is downward compatible to TOS, so this should
    # be no problem.
    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
        echo m68k-atari-mint${UNAME_RELEASE}
	exit ;;
    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
	echo m68k-atari-mint${UNAME_RELEASE}
        exit ;;
    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
        echo m68k-atari-mint${UNAME_RELEASE}
	exit ;;
    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
        echo m68k-milan-mint${UNAME_RELEASE}
        exit ;;
    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
        echo m68k-hades-mint${UNAME_RELEASE}
        exit ;;
    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
        echo m68k-unknown-mint${UNAME_RELEASE}
        exit ;;
    m68k:machten:*:*)
	echo m68k-apple-machten${UNAME_RELEASE}
	exit ;;
    powerpc:machten:*:*)
	echo powerpc-apple-machten${UNAME_RELEASE}
	exit ;;
    RISC*:Mach:*:*)
	echo mips-dec-mach_bsd4.3
	exit ;;
    RISC*:ULTRIX:*:*)
	echo mips-dec-ultrix${UNAME_RELEASE}
	exit ;;
    VAX*:ULTRIX*:*:*)
	echo vax-dec-ultrix${UNAME_RELEASE}
	exit ;;
    2020:CLIX:*:* | 2430:CLIX:*:*)
	echo clipper-intergraph-clix${UNAME_RELEASE}
	exit ;;
    mips:*:*:UMIPS | mips:*:*:RISCos)
	eval $set_cc_for_build
	sed 's/^	//' << EOF >$dummy.c
#ifdef __cplusplus
#include <stdio.h>  /* for printf() prototype */
	int main (int argc, char *argv[]) {
#else
	int main (argc, argv) int argc; char *argv[]; {
#endif
	#if defined (host_mips) && defined (MIPSEB)
	#if defined (SYSTYPE_SYSV)
	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
	#endif
	#if defined (SYSTYPE_SVR4)
	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
	#endif
	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
	#endif
	#endif
	  exit (-1);
	}
EOF
	$CC_FOR_BUILD -o $dummy $dummy.c &&
	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
	  SYSTEM_NAME=`$dummy $dummyarg` &&
	    { echo "$SYSTEM_NAME"; exit; }
	echo mips-mips-riscos${UNAME_RELEASE}
	exit ;;
    Motorola:PowerMAX_OS:*:*)
	echo powerpc-motorola-powermax
	exit ;;
    Motorola:*:4.3:PL8-*)
	echo powerpc-harris-powermax
	exit ;;
    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
	echo powerpc-harris-powermax
	exit ;;
    Night_Hawk:Power_UNIX:*:*)
	echo powerpc-harris-powerunix
	exit ;;
    m88k:CX/UX:7*:*)
	echo m88k-harris-cxux7
	exit ;;
    m88k:*:4*:R4*)
	echo m88k-motorola-sysv4
	exit ;;
    m88k:*:3*:R3*)
	echo m88k-motorola-sysv3
	exit ;;
    AViiON:dgux:*:*)
        # DG/UX returns AViiON for all architectures
        UNAME_PROCESSOR=`/usr/bin/uname -p`
	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
	then
	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
	       [ ${TARGET_BINARY_INTERFACE}x = x ]
	    then
		echo m88k-dg-dgux${UNAME_RELEASE}
	    else
		echo m88k-dg-dguxbcs${UNAME_RELEASE}
	    fi
	else
	    echo i586-dg-dgux${UNAME_RELEASE}
	fi
 	exit ;;
    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
	echo m88k-dolphin-sysv3
	exit ;;
    M88*:*:R3*:*)
	# Delta 88k system running SVR3
	echo m88k-motorola-sysv3
	exit ;;
    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
	echo m88k-tektronix-sysv3
	exit ;;
    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
	echo m68k-tektronix-bsd
	exit ;;
    *:IRIX*:*:*)
	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
	exit ;;
    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
    i*86:AIX:*:*)
	echo i386-ibm-aix
	exit ;;
    ia64:AIX:*:*)
	if [ -x /usr/bin/oslevel ] ; then
		IBM_REV=`/usr/bin/oslevel`
	else
		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
	fi
	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
	exit ;;
    *:AIX:2:3)
	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
		eval $set_cc_for_build
		sed 's/^		//' << EOF >$dummy.c
		#include <sys/systemcfg.h>

		main()
			{
			if (!__power_pc())
				exit(1);
			puts("powerpc-ibm-aix3.2.5");
			exit(0);
			}
EOF
		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
		then
			echo "$SYSTEM_NAME"
		else
			echo rs6000-ibm-aix3.2.5
		fi
	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
		echo rs6000-ibm-aix3.2.4
	else
		echo rs6000-ibm-aix3.2
	fi
	exit ;;
    *:AIX:*:[4567])
	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
		IBM_ARCH=rs6000
	else
		IBM_ARCH=powerpc
	fi
	if [ -x /usr/bin/oslevel ] ; then
		IBM_REV=`/usr/bin/oslevel`
	else
		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
	fi
	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
	exit ;;
    *:AIX:*:*)
	echo rs6000-ibm-aix
	exit ;;
    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
	echo romp-ibm-bsd4.4
	exit ;;
    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
	exit ;;                             # report: romp-ibm BSD 4.3
    *:BOSX:*:*)
	echo rs6000-bull-bosx
	exit ;;
    DPX/2?00:B.O.S.:*:*)
	echo m68k-bull-sysv3
	exit ;;
    9000/[34]??:4.3bsd:1.*:*)
	echo m68k-hp-bsd
	exit ;;
    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
	echo m68k-hp-bsd4.4
	exit ;;
    9000/[34678]??:HP-UX:*:*)
	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
	case "${UNAME_MACHINE}" in
	    9000/31? )            HP_ARCH=m68000 ;;
	    9000/[34]?? )         HP_ARCH=m68k ;;
	    9000/[678][0-9][0-9])
		if [ -x /usr/bin/getconf ]; then
		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
                    case "${sc_cpu_version}" in
                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
                      532)                      # CPU_PA_RISC2_0
                        case "${sc_kernel_bits}" in
                          32) HP_ARCH="hppa2.0n" ;;
                          64) HP_ARCH="hppa2.0w" ;;
			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
                        esac ;;
                    esac
		fi
		if [ "${HP_ARCH}" = "" ]; then
		    eval $set_cc_for_build
		    sed 's/^              //' << EOF >$dummy.c

              #define _HPUX_SOURCE
              #include <stdlib.h>
              #include <unistd.h>

              int main ()
              {
              #if defined(_SC_KERNEL_BITS)
                  long bits = sysconf(_SC_KERNEL_BITS);
              #endif
                  long cpu  = sysconf (_SC_CPU_VERSION);

                  switch (cpu)
              	{
              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
              	case CPU_PA_RISC2_0:
              #if defined(_SC_KERNEL_BITS)
              	    switch (bits)
              		{
              		case 64: puts ("hppa2.0w"); break;
              		case 32: puts ("hppa2.0n"); break;
              		default: puts ("hppa2.0"); break;
              		} break;
              #else  /* !defined(_SC_KERNEL_BITS) */
              	    puts ("hppa2.0"); break;
              #endif
              	default: puts ("hppa1.0"); break;
              	}
                  exit (0);
              }
EOF
		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
		    test -z "$HP_ARCH" && HP_ARCH=hppa
		fi ;;
	esac
	if [ ${HP_ARCH} = "hppa2.0w" ]
	then
	    eval $set_cc_for_build

	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
	    # generating 64-bit code.  GNU and HP use different nomenclature:
	    #
	    # $ CC_FOR_BUILD=cc ./config.guess
	    # => hppa2.0w-hp-hpux11.23
	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
	    # => hppa64-hp-hpux11.23

	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
		grep -q __LP64__
	    then
		HP_ARCH="hppa2.0w"
	    else
		HP_ARCH="hppa64"
	    fi
	fi
	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
	exit ;;
    ia64:HP-UX:*:*)
	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
	echo ia64-hp-hpux${HPUX_REV}
	exit ;;
    3050*:HI-UX:*:*)
	eval $set_cc_for_build
	sed 's/^	//' << EOF >$dummy.c
	#include <unistd.h>
	int
	main ()
	{
	  long cpu = sysconf (_SC_CPU_VERSION);
	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
	     results, however.  */
	  if (CPU_IS_PA_RISC (cpu))
	    {
	      switch (cpu)
		{
		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
		  default: puts ("hppa-hitachi-hiuxwe2"); break;
		}
	    }
	  else if (CPU_IS_HP_MC68K (cpu))
	    puts ("m68k-hitachi-hiuxwe2");
	  else puts ("unknown-hitachi-hiuxwe2");
	  exit (0);
	}
EOF
	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
		{ echo "$SYSTEM_NAME"; exit; }
	echo unknown-hitachi-hiuxwe2
	exit ;;
    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
	echo hppa1.1-hp-bsd
	exit ;;
    9000/8??:4.3bsd:*:*)
	echo hppa1.0-hp-bsd
	exit ;;
    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
	echo hppa1.0-hp-mpeix
	exit ;;
    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
	echo hppa1.1-hp-osf
	exit ;;
    hp8??:OSF1:*:*)
	echo hppa1.0-hp-osf
	exit ;;
    i*86:OSF1:*:*)
	if [ -x /usr/sbin/sysversion ] ; then
	    echo ${UNAME_MACHINE}-unknown-osf1mk
	else
	    echo ${UNAME_MACHINE}-unknown-osf1
	fi
	exit ;;
    parisc*:Lites*:*:*)
	echo hppa1.1-hp-lites
	exit ;;
    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
	echo c1-convex-bsd
        exit ;;
    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
	if getsysinfo -f scalar_acc
	then echo c32-convex-bsd
	else echo c2-convex-bsd
	fi
        exit ;;
    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
	echo c34-convex-bsd
        exit ;;
    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
	echo c38-convex-bsd
        exit ;;
    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
	echo c4-convex-bsd
        exit ;;
    CRAY*Y-MP:*:*:*)
	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
	exit ;;
    CRAY*[A-Z]90:*:*:*)
	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
	      -e 's/\.[^.]*$/.X/'
	exit ;;
    CRAY*TS:*:*:*)
	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
	exit ;;
    CRAY*T3E:*:*:*)
	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
	exit ;;
    CRAY*SV1:*:*:*)
	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
	exit ;;
    *:UNICOS/mp:*:*)
	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
	exit ;;
    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
        exit ;;
    5000:UNIX_System_V:4.*:*)
        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
	exit ;;
    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
	exit ;;
    sparc*:BSD/OS:*:*)
	echo sparc-unknown-bsdi${UNAME_RELEASE}
	exit ;;
    *:BSD/OS:*:*)
	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
	exit ;;
    *:FreeBSD:*:*)
	case ${UNAME_MACHINE} in
	    pc98)
		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
	    amd64)
		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
	    *)
		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
	esac
	exit ;;
    i*:CYGWIN*:*)
	echo ${UNAME_MACHINE}-pc-cygwin
	exit ;;
    *:MINGW*:*)
	echo ${UNAME_MACHINE}-pc-mingw32
	exit ;;
    i*:windows32*:*)
    	# uname -m includes "-pc" on this system.
    	echo ${UNAME_MACHINE}-mingw32
	exit ;;
    i*:PW*:*)
	echo ${UNAME_MACHINE}-pc-pw32
	exit ;;
    *:Interix*:*)
    	case ${UNAME_MACHINE} in
	    x86)
		echo i586-pc-interix${UNAME_RELEASE}
		exit ;;
	    authenticamd | genuineintel | EM64T)
		echo x86_64-unknown-interix${UNAME_RELEASE}
		exit ;;
	    IA64)
		echo ia64-unknown-interix${UNAME_RELEASE}
		exit ;;
	esac ;;
    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
	echo i${UNAME_MACHINE}-pc-mks
	exit ;;
    8664:Windows_NT:*)
	echo x86_64-pc-mks
	exit ;;
    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
	# How do we know it's Interix rather than the generic POSIX subsystem?
	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
	# UNAME_MACHINE based on the output of uname instead of i386?
	echo i586-pc-interix
	exit ;;
    i*:UWIN*:*)
	echo ${UNAME_MACHINE}-pc-uwin
	exit ;;
    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
	echo x86_64-unknown-cygwin
	exit ;;
    p*:CYGWIN*:*)
	echo powerpcle-unknown-cygwin
	exit ;;
    prep*:SunOS:5.*:*)
	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit ;;
    *:GNU:*:*)
	# the GNU system
	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
	exit ;;
    *:GNU/*:*:*)
	# other systems with GNU libc and userland
	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
	exit ;;
    i*86:Minix:*:*)
	echo ${UNAME_MACHINE}-pc-minix
	exit ;;
    alpha:Linux:*:*)
	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
	  EV5)   UNAME_MACHINE=alphaev5 ;;
	  EV56)  UNAME_MACHINE=alphaev56 ;;
	  PCA56) UNAME_MACHINE=alphapca56 ;;
	  PCA57) UNAME_MACHINE=alphapca56 ;;
	  EV6)   UNAME_MACHINE=alphaev6 ;;
	  EV67)  UNAME_MACHINE=alphaev67 ;;
	  EV68*) UNAME_MACHINE=alphaev68 ;;
        esac
	objdump --private-headers /bin/sh | grep -q ld.so.1
	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
	exit ;;
    arm*:Linux:*:*)
	eval $set_cc_for_build
	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
	    | grep -q __ARM_EABI__
	then
	    echo ${UNAME_MACHINE}-unknown-linux-gnu
	else
	    echo ${UNAME_MACHINE}-unknown-linux-gnueabi
	fi
	exit ;;
    avr32*:Linux:*:*)
	echo ${UNAME_MACHINE}-unknown-linux-gnu
	exit ;;
    cris:Linux:*:*)
	echo cris-axis-linux-gnu
	exit ;;
    crisv32:Linux:*:*)
	echo crisv32-axis-linux-gnu
	exit ;;
    frv:Linux:*:*)
    	echo frv-unknown-linux-gnu
	exit ;;
    i*86:Linux:*:*)
	LIBC=gnu
	eval $set_cc_for_build
	sed 's/^	//' << EOF >$dummy.c
	#ifdef __dietlibc__
	LIBC=dietlibc
	#endif
EOF
	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
	echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
	exit ;;
    ia64:Linux:*:*)
	echo ${UNAME_MACHINE}-unknown-linux-gnu
	exit ;;
    m32r*:Linux:*:*)
	echo ${UNAME_MACHINE}-unknown-linux-gnu
	exit ;;
    m68*:Linux:*:*)
	echo ${UNAME_MACHINE}-unknown-linux-gnu
	exit ;;
    mips:Linux:*:* | mips64:Linux:*:*)
	eval $set_cc_for_build
	sed 's/^	//' << EOF >$dummy.c
	#undef CPU
	#undef ${UNAME_MACHINE}
	#undef ${UNAME_MACHINE}el
	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
	CPU=${UNAME_MACHINE}el
	#else
	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
	CPU=${UNAME_MACHINE}
	#else
	CPU=
	#endif
	#endif
EOF
	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
	;;
    or32:Linux:*:*)
	echo or32-unknown-linux-gnu
	exit ;;
    padre:Linux:*:*)
	echo sparc-unknown-linux-gnu
	exit ;;
    parisc64:Linux:*:* | hppa64:Linux:*:*)
	echo hppa64-unknown-linux-gnu
	exit ;;
    parisc:Linux:*:* | hppa:Linux:*:*)
	# Look for CPU level
	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
	  *)    echo hppa-unknown-linux-gnu ;;
	esac
	exit ;;
    ppc64:Linux:*:*)
	echo powerpc64-unknown-linux-gnu
	exit ;;
    ppc:Linux:*:*)
	echo powerpc-unknown-linux-gnu
	exit ;;
    s390:Linux:*:* | s390x:Linux:*:*)
	echo ${UNAME_MACHINE}-ibm-linux
	exit ;;
    sh64*:Linux:*:*)
    	echo ${UNAME_MACHINE}-unknown-linux-gnu
	exit ;;
    sh*:Linux:*:*)
	echo ${UNAME_MACHINE}-unknown-linux-gnu
	exit ;;
    sparc:Linux:*:* | sparc64:Linux:*:*)
	echo ${UNAME_MACHINE}-unknown-linux-gnu
	exit ;;
    tile*:Linux:*:*)
	echo ${UNAME_MACHINE}-tilera-linux-gnu
	exit ;;
    vax:Linux:*:*)
	echo ${UNAME_MACHINE}-dec-linux-gnu
	exit ;;
    x86_64:Linux:*:*)
	echo x86_64-unknown-linux-gnu
	exit ;;
    xtensa*:Linux:*:*)
    	echo ${UNAME_MACHINE}-unknown-linux-gnu
	exit ;;
    i*86:DYNIX/ptx:4*:*)
	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
	# earlier versions are messed up and put the nodename in both
	# sysname and nodename.
	echo i386-sequent-sysv4
	exit ;;
    i*86:UNIX_SV:4.2MP:2.*)
        # Unixware is an offshoot of SVR4, but it has its own version
        # number series starting with 2...
        # I am not positive that other SVR4 systems won't match this,
	# I just have to hope.  -- rms.
        # Use sysv4.2uw... so that sysv4* matches it.
	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
	exit ;;
    i*86:OS/2:*:*)
	# If we were able to find `uname', then EMX Unix compatibility
	# is probably installed.
	echo ${UNAME_MACHINE}-pc-os2-emx
	exit ;;
    i*86:XTS-300:*:STOP)
	echo ${UNAME_MACHINE}-unknown-stop
	exit ;;
    i*86:atheos:*:*)
	echo ${UNAME_MACHINE}-unknown-atheos
	exit ;;
    i*86:syllable:*:*)
	echo ${UNAME_MACHINE}-pc-syllable
	exit ;;
    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
	echo i386-unknown-lynxos${UNAME_RELEASE}
	exit ;;
    i*86:*DOS:*:*)
	echo ${UNAME_MACHINE}-pc-msdosdjgpp
	exit ;;
    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
	else
		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
	fi
	exit ;;
    i*86:*:5:[678]*)
    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
	case `/bin/uname -X | grep "^Machine"` in
	    *486*)	     UNAME_MACHINE=i486 ;;
	    *Pentium)	     UNAME_MACHINE=i586 ;;
	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
	esac
	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
	exit ;;
    i*86:*:3.2:*)
	if test -f /usr/options/cb.name; then
		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
	elif /bin/uname -X 2>/dev/null >/dev/null ; then
		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
			&& UNAME_MACHINE=i586
		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
			&& UNAME_MACHINE=i686
		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
			&& UNAME_MACHINE=i686
		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
	else
		echo ${UNAME_MACHINE}-pc-sysv32
	fi
	exit ;;
    pc:*:*:*)
	# Left here for compatibility:
        # uname -m prints for DJGPP always 'pc', but it prints nothing about
        # the processor, so we play safe by assuming i586.
	# Note: whatever this is, it MUST be the same as what config.sub
	# prints for the "djgpp" host, or else GDB configury will decide that
	# this is a cross-build.
	echo i586-pc-msdosdjgpp
        exit ;;
    Intel:Mach:3*:*)
	echo i386-pc-mach3
	exit ;;
    paragon:*:*:*)
	echo i860-intel-osf1
	exit ;;
    i860:*:4.*:*) # i860-SVR4
	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
	else # Add other i860-SVR4 vendors below as they are discovered.
	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
	fi
	exit ;;
    mini*:CTIX:SYS*5:*)
	# "miniframe"
	echo m68010-convergent-sysv
	exit ;;
    mc68k:UNIX:SYSTEM5:3.51m)
	echo m68k-convergent-sysv
	exit ;;
    M680?0:D-NIX:5.3:*)
	echo m68k-diab-dnix
	exit ;;
    M68*:*:R3V[5678]*:*)
	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
	OS_REL=''
	test -r /etc/.relid \
	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
          && { echo i486-ncr-sysv4; exit; } ;;
    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
	OS_REL='.3'
	test -r /etc/.relid \
	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
	echo m68k-unknown-lynxos${UNAME_RELEASE}
	exit ;;
    mc68030:UNIX_System_V:4.*:*)
	echo m68k-atari-sysv4
	exit ;;
    TSUNAMI:LynxOS:2.*:*)
	echo sparc-unknown-lynxos${UNAME_RELEASE}
	exit ;;
    rs6000:LynxOS:2.*:*)
	echo rs6000-unknown-lynxos${UNAME_RELEASE}
	exit ;;
    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
	echo powerpc-unknown-lynxos${UNAME_RELEASE}
	exit ;;
    SM[BE]S:UNIX_SV:*:*)
	echo mips-dde-sysv${UNAME_RELEASE}
	exit ;;
    RM*:ReliantUNIX-*:*:*)
	echo mips-sni-sysv4
	exit ;;
    RM*:SINIX-*:*:*)
	echo mips-sni-sysv4
	exit ;;
    *:SINIX-*:*:*)
	if uname -p 2>/dev/null >/dev/null ; then
		UNAME_MACHINE=`(uname -p) 2>/dev/null`
		echo ${UNAME_MACHINE}-sni-sysv4
	else
		echo ns32k-sni-sysv
	fi
	exit ;;
    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
                      # says <Richard.M.Bartel@ccMail.Census.GOV>
        echo i586-unisys-sysv4
        exit ;;
    *:UNIX_System_V:4*:FTX*)
	# From Gerald Hewes <hewes@openmarket.com>.
	# How about differentiating between stratus architectures? -djm
	echo hppa1.1-stratus-sysv4
	exit ;;
    *:*:*:FTX*)
	# From seanf@swdc.stratus.com.
	echo i860-stratus-sysv4
	exit ;;
    i*86:VOS:*:*)
	# From Paul.Green@stratus.com.
	echo ${UNAME_MACHINE}-stratus-vos
	exit ;;
    *:VOS:*:*)
	# From Paul.Green@stratus.com.
	echo hppa1.1-stratus-vos
	exit ;;
    mc68*:A/UX:*:*)
	echo m68k-apple-aux${UNAME_RELEASE}
	exit ;;
    news*:NEWS-OS:6*:*)
	echo mips-sony-newsos6
	exit ;;
    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
	if [ -d /usr/nec ]; then
	        echo mips-nec-sysv${UNAME_RELEASE}
	else
	        echo mips-unknown-sysv${UNAME_RELEASE}
	fi
        exit ;;
    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
	echo powerpc-be-beos
	exit ;;
    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
	echo powerpc-apple-beos
	exit ;;
    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
	echo i586-pc-beos
	exit ;;
    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
	echo i586-pc-haiku
	exit ;;
    SX-4:SUPER-UX:*:*)
	echo sx4-nec-superux${UNAME_RELEASE}
	exit ;;
    SX-5:SUPER-UX:*:*)
	echo sx5-nec-superux${UNAME_RELEASE}
	exit ;;
    SX-6:SUPER-UX:*:*)
	echo sx6-nec-superux${UNAME_RELEASE}
	exit ;;
    SX-7:SUPER-UX:*:*)
	echo sx7-nec-superux${UNAME_RELEASE}
	exit ;;
    SX-8:SUPER-UX:*:*)
	echo sx8-nec-superux${UNAME_RELEASE}
	exit ;;
    SX-8R:SUPER-UX:*:*)
	echo sx8r-nec-superux${UNAME_RELEASE}
	exit ;;
    Power*:Rhapsody:*:*)
	echo powerpc-apple-rhapsody${UNAME_RELEASE}
	exit ;;
    *:Rhapsody:*:*)
	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
	exit ;;
    *:Darwin:*:*)
	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
	case $UNAME_PROCESSOR in
	    i386)
		eval $set_cc_for_build
		if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
		  if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
		      (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
		      grep IS_64BIT_ARCH >/dev/null
		  then
		      UNAME_PROCESSOR="x86_64"
		  fi
		fi ;;
	    unknown) UNAME_PROCESSOR=powerpc ;;
	esac
	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
	exit ;;
    *:procnto*:*:* | *:QNX:[0123456789]*:*)
	UNAME_PROCESSOR=`uname -p`
	if test "$UNAME_PROCESSOR" = "x86"; then
		UNAME_PROCESSOR=i386
		UNAME_MACHINE=pc
	fi
	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
	exit ;;
    *:QNX:*:4*)
	echo i386-pc-qnx
	exit ;;
    NEO-?:NONSTOP_KERNEL:*:*)
	echo neo-tandem-nsk${UNAME_RELEASE}
	exit ;;
    NSE-?:NONSTOP_KERNEL:*:*)
	echo nse-tandem-nsk${UNAME_RELEASE}
	exit ;;
    NSR-?:NONSTOP_KERNEL:*:*)
	echo nsr-tandem-nsk${UNAME_RELEASE}
	exit ;;
    *:NonStop-UX:*:*)
	echo mips-compaq-nonstopux
	exit ;;
    BS2000:POSIX*:*:*)
	echo bs2000-siemens-sysv
	exit ;;
    DS/*:UNIX_System_V:*:*)
	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
	exit ;;
    *:Plan9:*:*)
	# "uname -m" is not consistent, so use $cputype instead. 386
	# is converted to i386 for consistency with other x86
	# operating systems.
	if test "$cputype" = "386"; then
	    UNAME_MACHINE=i386
	else
	    UNAME_MACHINE="$cputype"
	fi
	echo ${UNAME_MACHINE}-unknown-plan9
	exit ;;
    *:TOPS-10:*:*)
	echo pdp10-unknown-tops10
	exit ;;
    *:TENEX:*:*)
	echo pdp10-unknown-tenex
	exit ;;
    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
	echo pdp10-dec-tops20
	exit ;;
    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
	echo pdp10-xkl-tops20
	exit ;;
    *:TOPS-20:*:*)
	echo pdp10-unknown-tops20
	exit ;;
    *:ITS:*:*)
	echo pdp10-unknown-its
	exit ;;
    SEI:*:*:SEIUX)
        echo mips-sei-seiux${UNAME_RELEASE}
	exit ;;
    *:DragonFly:*:*)
	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
	exit ;;
    *:*VMS:*:*)
    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
	case "${UNAME_MACHINE}" in
	    A*) echo alpha-dec-vms ; exit ;;
	    I*) echo ia64-dec-vms ; exit ;;
	    V*) echo vax-dec-vms ; exit ;;
	esac ;;
    *:XENIX:*:SysV)
	echo i386-pc-xenix
	exit ;;
    i*86:skyos:*:*)
	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
	exit ;;
    i*86:rdos:*:*)
	echo ${UNAME_MACHINE}-pc-rdos
	exit ;;
    i*86:AROS:*:*)
	echo ${UNAME_MACHINE}-pc-aros
	exit ;;
esac

#echo '(No uname command or uname output not recognized.)' 1>&2
#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2

eval $set_cc_for_build
cat >$dummy.c <<EOF
#ifdef _SEQUENT_
# include <sys/types.h>
# include <sys/utsname.h>
#endif
main ()
{
#if defined (sony)
#if defined (MIPSEB)
  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
     I don't know....  */
  printf ("mips-sony-bsd\n"); exit (0);
#else
#include <sys/param.h>
  printf ("m68k-sony-newsos%s\n",
#ifdef NEWSOS4
          "4"
#else
	  ""
#endif
         ); exit (0);
#endif
#endif

#if defined (__arm) && defined (__acorn) && defined (__unix)
  printf ("arm-acorn-riscix\n"); exit (0);
#endif

#if defined (hp300) && !defined (hpux)
  printf ("m68k-hp-bsd\n"); exit (0);
#endif

#if defined (NeXT)
#if !defined (__ARCHITECTURE__)
#define __ARCHITECTURE__ "m68k"
#endif
  int version;
  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
  if (version < 4)
    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
  else
    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
  exit (0);
#endif

#if defined (MULTIMAX) || defined (n16)
#if defined (UMAXV)
  printf ("ns32k-encore-sysv\n"); exit (0);
#else
#if defined (CMU)
  printf ("ns32k-encore-mach\n"); exit (0);
#else
  printf ("ns32k-encore-bsd\n"); exit (0);
#endif
#endif
#endif

#if defined (__386BSD__)
  printf ("i386-pc-bsd\n"); exit (0);
#endif

#if defined (sequent)
#if defined (i386)
  printf ("i386-sequent-dynix\n"); exit (0);
#endif
#if defined (ns32000)
  printf ("ns32k-sequent-dynix\n"); exit (0);
#endif
#endif

#if defined (_SEQUENT_)
    struct utsname un;

    uname(&un);

    if (strncmp(un.version, "V2", 2) == 0) {
	printf ("i386-sequent-ptx2\n"); exit (0);
    }
    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
	printf ("i386-sequent-ptx1\n"); exit (0);
    }
    printf ("i386-sequent-ptx\n"); exit (0);

#endif

#if defined (vax)
# if !defined (ultrix)
#  include <sys/param.h>
#  if defined (BSD)
#   if BSD == 43
      printf ("vax-dec-bsd4.3\n"); exit (0);
#   else
#    if BSD == 199006
      printf ("vax-dec-bsd4.3reno\n"); exit (0);
#    else
      printf ("vax-dec-bsd\n"); exit (0);
#    endif
#   endif
#  else
    printf ("vax-dec-bsd\n"); exit (0);
#  endif
# else
    printf ("vax-dec-ultrix\n"); exit (0);
# endif
#endif

#if defined (alliant) && defined (i860)
  printf ("i860-alliant-bsd\n"); exit (0);
#endif

  exit (1);
}
EOF

$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
	{ echo "$SYSTEM_NAME"; exit; }

# Apollos put the system type in the environment.

test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }

# Convex versions that predate uname can use getsysinfo(1)

if [ -x /usr/convex/getsysinfo ]
then
    case `getsysinfo -f cpu_type` in
    c1*)
	echo c1-convex-bsd
	exit ;;
    c2*)
	if getsysinfo -f scalar_acc
	then echo c32-convex-bsd
	else echo c2-convex-bsd
	fi
	exit ;;
    c34*)
	echo c34-convex-bsd
	exit ;;
    c38*)
	echo c38-convex-bsd
	exit ;;
    c4*)
	echo c4-convex-bsd
	exit ;;
    esac
fi

cat >&2 <<EOF
$0: unable to guess system type

This script, last modified $timestamp, has failed to recognize
the operating system you are using. It is advised that you
download the most up to date version of the config scripts from

  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
and
  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD

If the version you run ($0) is already up to date, please
send the following data and any information you think might be
pertinent to <config-patches@gnu.org> in order to provide the needed
information to handle your system.

config.guess timestamp = $timestamp

uname -m = `(uname -m) 2>/dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`

/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`

hostinfo               = `(hostinfo) 2>/dev/null`
/bin/universe          = `(/bin/universe) 2>/dev/null`
/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
/bin/arch              = `(/bin/arch) 2>/dev/null`
/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`

UNAME_MACHINE = ${UNAME_MACHINE}
UNAME_RELEASE = ${UNAME_RELEASE}
UNAME_SYSTEM  = ${UNAME_SYSTEM}
UNAME_VERSION = ${UNAME_VERSION}
EOF

exit 1

# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "timestamp='"
# time-stamp-format: "%:y-%02m-%02d"
# time-stamp-end: "'"
# End:

#! /bin/sh
# Configuration validation subroutine script.
#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
#   Free Software Foundation, Inc.

timestamp='2010-09-11'

# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
# can handle that machine.  It does not imply ALL GNU software can.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
# 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.


# Please send patches to <config-patches@gnu.org>.  Submit a context
# diff and a properly formatted GNU ChangeLog entry.
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# If it is invalid, we print an error message on stderr and exit with code 1.
# Otherwise, we print the canonical config type on stdout and succeed.

# You can get the latest version of this script from:
# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD

# This file is supposed to be the same for all GNU packages
# and recognize all the CPU types, system types and aliases
# that are meaningful with *any* GNU software.
# Each package is responsible for reporting which valid configurations
# it does not support.  The user should be able to distinguish
# a failure to support a valid configuration from a meaningless
# configuration.

# The goal of this file is to map all the various variations of a given
# machine specification into a single specification in the form:
#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
# or in some cases, the newer four-part form:
#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
# It is wrong to echo any other type of specification.

me=`echo "$0" | sed -e 's,.*/,,'`

usage="\
Usage: $0 [OPTION] CPU-MFR-OPSYS
       $0 [OPTION] ALIAS

Canonicalize a configuration name.

Operation modes:
  -h, --help         print this help, then exit
  -t, --time-stamp   print date of last modification, then exit
  -v, --version      print version number, then exit

Report bugs and patches to <config-patches@gnu.org>."

version="\
GNU config.sub ($timestamp)

Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free
Software Foundation, Inc.

This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."

help="
Try \`$me --help' for more information."

# Parse command line
while test $# -gt 0 ; do
  case $1 in
    --time-stamp | --time* | -t )
       echo "$timestamp" ; exit ;;
    --version | -v )
       echo "$version" ; exit ;;
    --help | --h* | -h )
       echo "$usage"; exit ;;
    -- )     # Stop option processing
       shift; break ;;
    - )	# Use stdin as input.
       break ;;
    -* )
       echo "$me: invalid option $1$help"
       exit 1 ;;

    *local*)
       # First pass through any local machine types.
       echo $1
       exit ;;

    * )
       break ;;
  esac
done

case $# in
 0) echo "$me: missing argument$help" >&2
    exit 1;;
 1) ;;
 *) echo "$me: too many arguments$help" >&2
    exit 1;;
esac

# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
  linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
  knetbsd*-gnu* | netbsd*-gnu* | \
  kopensolaris*-gnu* | \
  storm-chaos* | os2-emx* | rtmk-nova*)
    os=-$maybe_os
    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
    ;;
  *)
    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
    if [ $basic_machine != $1 ]
    then os=`echo $1 | sed 's/.*-/-/'`
    else os=; fi
    ;;
esac

### Let's recognize common machines as not being operating systems so
### that things like config.sub decstation-3100 work.  We also
### recognize some manufacturers as not being operating systems, so we
### can provide default operating systems below.
case $os in
	-sun*os*)
		# Prevent following clause from handling this invalid input.
		;;
	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
	-apple | -axis | -knuth | -cray | -microblaze)
		os=
		basic_machine=$1
		;;
        -bluegene*)
	        os=-cnk
		;;
	-sim | -cisco | -oki | -wec | -winbond)
		os=
		basic_machine=$1
		;;
	-scout)
		;;
	-wrs)
		os=-vxworks
		basic_machine=$1
		;;
	-chorusos*)
		os=-chorusos
		basic_machine=$1
		;;
 	-chorusrdb)
 		os=-chorusrdb
		basic_machine=$1
 		;;
	-hiux*)
		os=-hiuxwe2
		;;
	-sco6)
		os=-sco5v6
		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
		;;
	-sco5)
		os=-sco3.2v5
		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
		;;
	-sco4)
		os=-sco3.2v4
		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
		;;
	-sco3.2.[4-9]*)
		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
		;;
	-sco3.2v[4-9]*)
		# Don't forget version if it is 3.2v4 or newer.
		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
		;;
	-sco5v6*)
		# Don't forget version if it is 3.2v4 or newer.
		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
		;;
	-sco*)
		os=-sco3.2v2
		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
		;;
	-udk*)
		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
		;;
	-isc)
		os=-isc2.2
		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
		;;
	-clix*)
		basic_machine=clipper-intergraph
		;;
	-isc*)
		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
		;;
	-lynx*)
		os=-lynxos
		;;
	-ptx*)
		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
		;;
	-windowsnt*)
		os=`echo $os | sed -e 's/windowsnt/winnt/'`
		;;
	-psos*)
		os=-psos
		;;
	-mint | -mint[0-9]*)
		basic_machine=m68k-atari
		os=-mint
		;;
esac

# Decode aliases for certain CPU-COMPANY combinations.
case $basic_machine in
	# Recognize the basic CPU types without company name.
	# Some are omitted here because they have special meanings below.
	1750a | 580 \
	| a29k \
	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
	| am33_2.0 \
	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
	| bfin \
	| c4x | clipper \
	| d10v | d30v | dlx | dsp16xx \
	| fido | fr30 | frv \
	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
	| i370 | i860 | i960 | ia64 \
	| ip2k | iq2000 \
	| lm32 \
	| m32c | m32r | m32rle | m68000 | m68k | m88k \
	| maxq | mb | microblaze | mcore | mep | metag \
	| mips | mipsbe | mipseb | mipsel | mipsle \
	| mips16 \
	| mips64 | mips64el \
	| mips64octeon | mips64octeonel \
	| mips64orion | mips64orionel \
	| mips64r5900 | mips64r5900el \
	| mips64vr | mips64vrel \
	| mips64vr4100 | mips64vr4100el \
	| mips64vr4300 | mips64vr4300el \
	| mips64vr5000 | mips64vr5000el \
	| mips64vr5900 | mips64vr5900el \
	| mipsisa32 | mipsisa32el \
	| mipsisa32r2 | mipsisa32r2el \
	| mipsisa64 | mipsisa64el \
	| mipsisa64r2 | mipsisa64r2el \
	| mipsisa64sb1 | mipsisa64sb1el \
	| mipsisa64sr71k | mipsisa64sr71kel \
	| mipstx39 | mipstx39el \
	| mn10200 | mn10300 \
	| moxie \
	| mt \
	| msp430 \
	| nds32 | nds32le | nds32be \
	| nios | nios2 \
	| ns16k | ns32k \
	| or32 \
	| pdp10 | pdp11 | pj | pjl \
	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
	| pyramid \
	| rx \
	| score \
	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
	| sh64 | sh64le \
	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
	| spu | strongarm \
	| tahoe | thumb | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
	| ubicom32 \
	| v850 | v850e \
	| we32k \
	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
	| z8k | z80)
		basic_machine=$basic_machine-unknown
		;;
	c54x)
		basic_machine=tic54x-unknown
		;;
	c55x)
		basic_machine=tic55x-unknown
		;;
	c6x)
		basic_machine=tic6x-unknown
		;;
	m6811 | m68hc11 | m6812 | m68hc12 | picochip)
		# Motorola 68HC11/12.
		basic_machine=$basic_machine-unknown
		os=-none
		;;
	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
		;;
	ms1)
		basic_machine=mt-unknown
		;;

	# We use `pc' rather than `unknown'
	# because (1) that's what they normally are, and
	# (2) the word "unknown" tends to confuse beginning users.
	i*86 | x86_64)
	  basic_machine=$basic_machine-pc
	  ;;
	# Object if more than one company name word.
	*-*-*)
		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
		exit 1
		;;
	# Recognize the basic CPU types with company name.
	580-* \
	| a29k-* \
	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
	| avr-* | avr32-* \
	| bfin-* | bs2000-* \
	| c[123]* | c30-* | [cjt]90-* | c4x-* \
	| clipper-* | craynv-* | cydra-* \
	| d10v-* | d30v-* | dlx-* \
	| elxsi-* \
	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
	| h8300-* | h8500-* \
	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
	| i*86-* | i860-* | i960-* | ia64-* \
	| ip2k-* | iq2000-* \
	| lm32-* \
	| m32c-* | m32r-* | m32rle-* \
	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
	| mips16-* \
	| mips64-* | mips64el-* \
	| mips64octeon-* | mips64octeonel-* \
	| mips64orion-* | mips64orionel-* \
	| mips64r5900-* | mips64r5900el-* \
	| mips64vr-* | mips64vrel-* \
	| mips64vr4100-* | mips64vr4100el-* \
	| mips64vr4300-* | mips64vr4300el-* \
	| mips64vr5000-* | mips64vr5000el-* \
	| mips64vr5900-* | mips64vr5900el-* \
	| mipsisa32-* | mipsisa32el-* \
	| mipsisa32r2-* | mipsisa32r2el-* \
	| mipsisa64-* | mipsisa64el-* \
	| mipsisa64r2-* | mipsisa64r2el-* \
	| mipsisa64sb1-* | mipsisa64sb1el-* \
	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
	| mipstx39-* | mipstx39el-* \
	| mmix-* \
	| mt-* \
	| msp430-* \
	| nds32-* | nds32le-* | nds32be-* \
	| nios-* | nios2-* \
	| none-* | np1-* | ns16k-* | ns32k-* \
	| orion-* \
	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
	| pyramid-* \
	| romp-* | rs6000-* | rx-* \
	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
	| sparclite-* \
	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
	| tahoe-* | thumb-* \
	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
	| tile-* | tilegx-* \
	| tron-* \
	| ubicom32-* \
	| v850-* | v850e-* | vax-* \
	| we32k-* \
	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
	| xstormy16-* | xtensa*-* \
	| ymp-* \
	| z8k-* | z80-*)
		;;
	# Recognize the basic CPU types without company name, with glob match.
	xtensa*)
		basic_machine=$basic_machine-unknown
		;;
	# Recognize the various machine names and aliases which stand
	# for a CPU type and a company and sometimes even an OS.
	386bsd)
		basic_machine=i386-unknown
		os=-bsd
		;;
	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
		basic_machine=m68000-att
		;;
	3b*)
		basic_machine=we32k-att
		;;
	a29khif)
		basic_machine=a29k-amd
		os=-udi
		;;
    	abacus)
		basic_machine=abacus-unknown
		;;
	adobe68k)
		basic_machine=m68010-adobe
		os=-scout
		;;
	alliant | fx80)
		basic_machine=fx80-alliant
		;;
	altos | altos3068)
		basic_machine=m68k-altos
		;;
	am29k)
		basic_machine=a29k-none
		os=-bsd
		;;
	amd64)
		basic_machine=x86_64-pc
		;;
	amd64-*)
		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	amdahl)
		basic_machine=580-amdahl
		os=-sysv
		;;
	amiga | amiga-*)
		basic_machine=m68k-unknown
		;;
	amigaos | amigados)
		basic_machine=m68k-unknown
		os=-amigaos
		;;
	amigaunix | amix)
		basic_machine=m68k-unknown
		os=-sysv4
		;;
	apollo68)
		basic_machine=m68k-apollo
		os=-sysv
		;;
	apollo68bsd)
		basic_machine=m68k-apollo
		os=-bsd
		;;
	aros)
		basic_machine=i386-pc
		os=-aros
		;;
	aux)
		basic_machine=m68k-apple
		os=-aux
		;;
	balance)
		basic_machine=ns32k-sequent
		os=-dynix
		;;
	blackfin)
		basic_machine=bfin-unknown
		os=-linux
		;;
	blackfin-*)
		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
		os=-linux
		;;
	bluegene*)
		basic_machine=powerpc-ibm
		os=-cnk
		;;
	c54x-*)
		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	c55x-*)
		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	c6x-*)
		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	c90)
		basic_machine=c90-cray
		os=-unicos
		;;
        cegcc)
		basic_machine=arm-unknown
		os=-cegcc
		;;
	convex-c1)
		basic_machine=c1-convex
		os=-bsd
		;;
	convex-c2)
		basic_machine=c2-convex
		os=-bsd
		;;
	convex-c32)
		basic_machine=c32-convex
		os=-bsd
		;;
	convex-c34)
		basic_machine=c34-convex
		os=-bsd
		;;
	convex-c38)
		basic_machine=c38-convex
		os=-bsd
		;;
	cray | j90)
		basic_machine=j90-cray
		os=-unicos
		;;
	craynv)
		basic_machine=craynv-cray
		os=-unicosmp
		;;
	cr16)
		basic_machine=cr16-unknown
		os=-elf
		;;
	crds | unos)
		basic_machine=m68k-crds
		;;
	crisv32 | crisv32-* | etraxfs*)
		basic_machine=crisv32-axis
		;;
	cris | cris-* | etrax*)
		basic_machine=cris-axis
		;;
	crx)
		basic_machine=crx-unknown
		os=-elf
		;;
	da30 | da30-*)
		basic_machine=m68k-da30
		;;
	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
		basic_machine=mips-dec
		;;
	decsystem10* | dec10*)
		basic_machine=pdp10-dec
		os=-tops10
		;;
	decsystem20* | dec20*)
		basic_machine=pdp10-dec
		os=-tops20
		;;
	delta | 3300 | motorola-3300 | motorola-delta \
	      | 3300-motorola | delta-motorola)
		basic_machine=m68k-motorola
		;;
	delta88)
		basic_machine=m88k-motorola
		os=-sysv3
		;;
	dicos)
		basic_machine=i686-pc
		os=-dicos
		;;
	djgpp)
		basic_machine=i586-pc
		os=-msdosdjgpp
		;;
	dpx20 | dpx20-*)
		basic_machine=rs6000-bull
		os=-bosx
		;;
	dpx2* | dpx2*-bull)
		basic_machine=m68k-bull
		os=-sysv3
		;;
	ebmon29k)
		basic_machine=a29k-amd
		os=-ebmon
		;;
	elxsi)
		basic_machine=elxsi-elxsi
		os=-bsd
		;;
	encore | umax | mmax)
		basic_machine=ns32k-encore
		;;
	es1800 | OSE68k | ose68k | ose | OSE)
		basic_machine=m68k-ericsson
		os=-ose
		;;
	fx2800)
		basic_machine=i860-alliant
		;;
	genix)
		basic_machine=ns32k-ns
		;;
	gmicro)
		basic_machine=tron-gmicro
		os=-sysv
		;;
	go32)
		basic_machine=i386-pc
		os=-go32
		;;
	h3050r* | hiux*)
		basic_machine=hppa1.1-hitachi
		os=-hiuxwe2
		;;
	h8300hms)
		basic_machine=h8300-hitachi
		os=-hms
		;;
	h8300xray)
		basic_machine=h8300-hitachi
		os=-xray
		;;
	h8500hms)
		basic_machine=h8500-hitachi
		os=-hms
		;;
	harris)
		basic_machine=m88k-harris
		os=-sysv3
		;;
	hp300-*)
		basic_machine=m68k-hp
		;;
	hp300bsd)
		basic_machine=m68k-hp
		os=-bsd
		;;
	hp300hpux)
		basic_machine=m68k-hp
		os=-hpux
		;;
	hp3k9[0-9][0-9] | hp9[0-9][0-9])
		basic_machine=hppa1.0-hp
		;;
	hp9k2[0-9][0-9] | hp9k31[0-9])
		basic_machine=m68000-hp
		;;
	hp9k3[2-9][0-9])
		basic_machine=m68k-hp
		;;
	hp9k6[0-9][0-9] | hp6[0-9][0-9])
		basic_machine=hppa1.0-hp
		;;
	hp9k7[0-79][0-9] | hp7[0-79][0-9])
		basic_machine=hppa1.1-hp
		;;
	hp9k78[0-9] | hp78[0-9])
		# FIXME: really hppa2.0-hp
		basic_machine=hppa1.1-hp
		;;
	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
		# FIXME: really hppa2.0-hp
		basic_machine=hppa1.1-hp
		;;
	hp9k8[0-9][13679] | hp8[0-9][13679])
		basic_machine=hppa1.1-hp
		;;
	hp9k8[0-9][0-9] | hp8[0-9][0-9])
		basic_machine=hppa1.0-hp
		;;
	hppa-next)
		os=-nextstep3
		;;
	hppaosf)
		basic_machine=hppa1.1-hp
		os=-osf
		;;
	hppro)
		basic_machine=hppa1.1-hp
		os=-proelf
		;;
	i370-ibm* | ibm*)
		basic_machine=i370-ibm
		;;
# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
	i*86v32)
		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
		os=-sysv32
		;;
	i*86v4*)
		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
		os=-sysv4
		;;
	i*86v)
		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
		os=-sysv
		;;
	i*86sol2)
		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
		os=-solaris2
		;;
	i386mach)
		basic_machine=i386-mach
		os=-mach
		;;
	i386-vsta | vsta)
		basic_machine=i386-unknown
		os=-vsta
		;;
	iris | iris4d)
		basic_machine=mips-sgi
		case $os in
		    -irix*)
			;;
		    *)
			os=-irix4
			;;
		esac
		;;
	isi68 | isi)
		basic_machine=m68k-isi
		os=-sysv
		;;
	m68knommu)
		basic_machine=m68k-unknown
		os=-linux
		;;
	m68knommu-*)
		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
		os=-linux
		;;
	m88k-omron*)
		basic_machine=m88k-omron
		;;
	magnum | m3230)
		basic_machine=mips-mips
		os=-sysv
		;;
	merlin)
		basic_machine=ns32k-utek
		os=-sysv
		;;
        microblaze)
		basic_machine=microblaze-xilinx
		;;
	mingw32)
		basic_machine=i386-pc
		os=-mingw32
		;;
	mingw32ce)
		basic_machine=arm-unknown
		os=-mingw32ce
		;;
	miniframe)
		basic_machine=m68000-convergent
		;;
	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
		basic_machine=m68k-atari
		os=-mint
		;;
	mips3*-*)
		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
		;;
	mips3*)
		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
		;;
	monitor)
		basic_machine=m68k-rom68k
		os=-coff
		;;
	morphos)
		basic_machine=powerpc-unknown
		os=-morphos
		;;
	msdos)
		basic_machine=i386-pc
		os=-msdos
		;;
	ms1-*)
		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
		;;
	mvs)
		basic_machine=i370-ibm
		os=-mvs
		;;
	ncr3000)
		basic_machine=i486-ncr
		os=-sysv4
		;;
	netbsd386)
		basic_machine=i386-unknown
		os=-netbsd
		;;
	netwinder)
		basic_machine=armv4l-rebel
		os=-linux
		;;
	news | news700 | news800 | news900)
		basic_machine=m68k-sony
		os=-newsos
		;;
	news1000)
		basic_machine=m68030-sony
		os=-newsos
		;;
	news-3600 | risc-news)
		basic_machine=mips-sony
		os=-newsos
		;;
	necv70)
		basic_machine=v70-nec
		os=-sysv
		;;
	next | m*-next )
		basic_machine=m68k-next
		case $os in
		    -nextstep* )
			;;
		    -ns2*)
		      os=-nextstep2
			;;
		    *)
		      os=-nextstep3
			;;
		esac
		;;
	nh3000)
		basic_machine=m68k-harris
		os=-cxux
		;;
	nh[45]000)
		basic_machine=m88k-harris
		os=-cxux
		;;
	nindy960)
		basic_machine=i960-intel
		os=-nindy
		;;
	mon960)
		basic_machine=i960-intel
		os=-mon960
		;;
	nonstopux)
		basic_machine=mips-compaq
		os=-nonstopux
		;;
	np1)
		basic_machine=np1-gould
		;;
        neo-tandem)
		basic_machine=neo-tandem
		;;
        nse-tandem)
		basic_machine=nse-tandem
		;;
	nsr-tandem)
		basic_machine=nsr-tandem
		;;
	op50n-* | op60c-*)
		basic_machine=hppa1.1-oki
		os=-proelf
		;;
	openrisc | openrisc-*)
		basic_machine=or32-unknown
		;;
	os400)
		basic_machine=powerpc-ibm
		os=-os400
		;;
	OSE68000 | ose68000)
		basic_machine=m68000-ericsson
		os=-ose
		;;
	os68k)
		basic_machine=m68k-none
		os=-os68k
		;;
	pa-hitachi)
		basic_machine=hppa1.1-hitachi
		os=-hiuxwe2
		;;
	paragon)
		basic_machine=i860-intel
		os=-osf
		;;
	parisc)
		basic_machine=hppa-unknown
		os=-linux
		;;
	parisc-*)
		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
		os=-linux
		;;
	pbd)
		basic_machine=sparc-tti
		;;
	pbb)
		basic_machine=m68k-tti
		;;
	pc532 | pc532-*)
		basic_machine=ns32k-pc532
		;;
	pc98)
		basic_machine=i386-pc
		;;
	pc98-*)
		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	pentium | p5 | k5 | k6 | nexgen | viac3)
		basic_machine=i586-pc
		;;
	pentiumpro | p6 | 6x86 | athlon | athlon_*)
		basic_machine=i686-pc
		;;
	pentiumii | pentium2 | pentiumiii | pentium3)
		basic_machine=i686-pc
		;;
	pentium4)
		basic_machine=i786-pc
		;;
	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	pentiumpro-* | p6-* | 6x86-* | athlon-*)
		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	pentium4-*)
		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	pn)
		basic_machine=pn-gould
		;;
	power)	basic_machine=power-ibm
		;;
	ppc)	basic_machine=powerpc-unknown
		;;
	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	ppcle | powerpclittle | ppc-le | powerpc-little)
		basic_machine=powerpcle-unknown
		;;
	ppcle-* | powerpclittle-*)
		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	ppc64)	basic_machine=powerpc64-unknown
		;;
	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
		basic_machine=powerpc64le-unknown
		;;
	ppc64le-* | powerpc64little-*)
		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
		;;
	ps2)
		basic_machine=i386-ibm
		;;
	pw32)
		basic_machine=i586-unknown
		os=-pw32
		;;
	rdos)
		basic_machine=i386-pc
		os=-rdos
		;;
	rom68k)
		basic_machine=m68k-rom68k
		os=-coff
		;;
	rm[46]00)
		basic_machine=mips-siemens
		;;
	rtpc | rtpc-*)
		basic_machine=romp-ibm
		;;
	s390 | s390-*)
		basic_machine=s390-ibm
		;;
	s390x | s390x-*)
		basic_machine=s390x-ibm
		;;
	sa29200)
		basic_machine=a29k-amd
		os=-udi
		;;
	sb1)
		basic_machine=mipsisa64sb1-unknown
		;;
	sb1el)
		basic_machine=mipsisa64sb1el-unknown
		;;
	sde)
		basic_machine=mipsisa32-sde
		os=-elf
		;;
	sei)
		basic_machine=mips-sei
		os=-seiux
		;;
	sequent)
		basic_machine=i386-sequent
		;;
	sh)
		basic_machine=sh-hitachi
		os=-hms
		;;
	sh5el)
		basic_machine=sh5le-unknown
		;;
	sh64)
		basic_machine=sh64-unknown
		;;
	sparclite-wrs | simso-wrs)
		basic_machine=sparclite-wrs
		os=-vxworks
		;;
	sps7)
		basic_machine=m68k-bull
		os=-sysv2
		;;
	spur)
		basic_machine=spur-unknown
		;;
	st2000)
		basic_machine=m68k-tandem
		;;
	stratus)
		basic_machine=i860-stratus
		os=-sysv4
		;;
	sun2)
		basic_machine=m68000-sun
		;;
	sun2os3)
		basic_machine=m68000-sun
		os=-sunos3
		;;
	sun2os4)
		basic_machine=m68000-sun
		os=-sunos4
		;;
	sun3os3)
		basic_machine=m68k-sun
		os=-sunos3
		;;
	sun3os4)
		basic_machine=m68k-sun
		os=-sunos4
		;;
	sun4os3)
		basic_machine=sparc-sun
		os=-sunos3
		;;
	sun4os4)
		basic_machine=sparc-sun
		os=-sunos4
		;;
	sun4sol2)
		basic_machine=sparc-sun
		os=-solaris2
		;;
	sun3 | sun3-*)
		basic_machine=m68k-sun
		;;
	sun4)
		basic_machine=sparc-sun
		;;
	sun386 | sun386i | roadrunner)
		basic_machine=i386-sun
		;;
	sv1)
		basic_machine=sv1-cray
		os=-unicos
		;;
	symmetry)
		basic_machine=i386-sequent
		os=-dynix
		;;
	t3e)
		basic_machine=alphaev5-cray
		os=-unicos
		;;
	t90)
		basic_machine=t90-cray
		os=-unicos
		;;
        # This must be matched before tile*.
        tilegx*)
		basic_machine=tilegx-unknown
		os=-linux-gnu
		;;
	tile*)
		basic_machine=tile-unknown
		os=-linux-gnu
		;;
	tx39)
		basic_machine=mipstx39-unknown
		;;
	tx39el)
		basic_machine=mipstx39el-unknown
		;;
	toad1)
		basic_machine=pdp10-xkl
		os=-tops20
		;;
	tower | tower-32)
		basic_machine=m68k-ncr
		;;
	tpf)
		basic_machine=s390x-ibm
		os=-tpf
		;;
	udi29k)
		basic_machine=a29k-amd
		os=-udi
		;;
	ultra3)
		basic_machine=a29k-nyu
		os=-sym1
		;;
	v810 | necv810)
		basic_machine=v810-nec
		os=-none
		;;
	vaxv)
		basic_machine=vax-dec
		os=-sysv
		;;
	vms)
		basic_machine=vax-dec
		os=-vms
		;;
	vpp*|vx|vx-*)
		basic_machine=f301-fujitsu
		;;
	vxworks960)
		basic_machine=i960-wrs
		os=-vxworks
		;;
	vxworks68)
		basic_machine=m68k-wrs
		os=-vxworks
		;;
	vxworks29k)
		basic_machine=a29k-wrs
		os=-vxworks
		;;
	w65*)
		basic_machine=w65-wdc
		os=-none
		;;
	w89k-*)
		basic_machine=hppa1.1-winbond
		os=-proelf
		;;
	xbox)
		basic_machine=i686-pc
		os=-mingw32
		;;
	xps | xps100)
		basic_machine=xps100-honeywell
		;;
	ymp)
		basic_machine=ymp-cray
		os=-unicos
		;;
	z8k-*-coff)
		basic_machine=z8k-unknown
		os=-sim
		;;
	z80-*-coff)
		basic_machine=z80-unknown
		os=-sim
		;;
	none)
		basic_machine=none-none
		os=-none
		;;

# Here we handle the default manufacturer of certain CPU types.  It is in
# some cases the only manufacturer, in others, it is the most popular.
	w89k)
		basic_machine=hppa1.1-winbond
		;;
	op50n)
		basic_machine=hppa1.1-oki
		;;
	op60c)
		basic_machine=hppa1.1-oki
		;;
	romp)
		basic_machine=romp-ibm
		;;
	mmix)
		basic_machine=mmix-knuth
		;;
	rs6000)
		basic_machine=rs6000-ibm
		;;
	vax)
		basic_machine=vax-dec
		;;
	pdp10)
		# there are many clones, so DEC is not a safe bet
		basic_machine=pdp10-unknown
		;;
	pdp11)
		basic_machine=pdp11-dec
		;;
	we32k)
		basic_machine=we32k-att
		;;
	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
		basic_machine=sh-unknown
		;;
	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
		basic_machine=sparc-sun
		;;
	cydra)
		basic_machine=cydra-cydrome
		;;
	orion)
		basic_machine=orion-highlevel
		;;
	orion105)
		basic_machine=clipper-highlevel
		;;
	mac | mpw | mac-mpw)
		basic_machine=m68k-apple
		;;
	pmac | pmac-mpw)
		basic_machine=powerpc-apple
		;;
	*-unknown)
		# Make sure to match an already-canonicalized machine name.
		;;
	*)
		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
		exit 1
		;;
esac

# Here we canonicalize certain aliases for manufacturers.
case $basic_machine in
	*-digital*)
		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
		;;
	*-commodore*)
		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
		;;
	*)
		;;
esac

# Decode manufacturer-specific aliases for certain operating systems.

if [ x"$os" != x"" ]
then
case $os in
        # First match some system type aliases
        # that might get confused with valid system types.
	# -solaris* is a basic system type, with this one exception.
        -auroraux)
	        os=-auroraux
		;;
	-solaris1 | -solaris1.*)
		os=`echo $os | sed -e 's|solaris1|sunos4|'`
		;;
	-solaris)
		os=-solaris2
		;;
	-svr4*)
		os=-sysv4
		;;
	-unixware*)
		os=-sysv4.2uw
		;;
	-gnu/linux*)
		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
		;;
	# First accept the basic system types.
	# The portable systems comes first.
	# Each alternative MUST END IN A *, to match a version number.
	# -sysv* is not here because it comes later, after sysvr4.
	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
	      | -sym* | -kopensolaris* \
	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
	      | -aos* | -aros* \
	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
	      | -openbsd* | -solidbsd* \
	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
	      | -chorusos* | -chorusrdb* | -cegcc* \
	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
	      | -mingw32* | -linux-gnu* | -linux-android* \
	      | -linux-newlib* | -linux-uclibc* \
	      | -uxpv* | -beos* | -mpeix* | -udk* \
	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
	# Remember, each alternative MUST END IN *, to match a version number.
		;;
	-qnx*)
		case $basic_machine in
		    x86-* | i*86-*)
			;;
		    *)
			os=-nto$os
			;;
		esac
		;;
	-nto-qnx*)
		;;
	-nto*)
		os=`echo $os | sed -e 's|nto|nto-qnx|'`
		;;
	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
		;;
	-mac*)
		os=`echo $os | sed -e 's|mac|macos|'`
		;;
	-linux-dietlibc)
		os=-linux-dietlibc
		;;
	-linux*)
		os=`echo $os | sed -e 's|linux|linux-gnu|'`
		;;
	-sunos5*)
		os=`echo $os | sed -e 's|sunos5|solaris2|'`
		;;
	-sunos6*)
		os=`echo $os | sed -e 's|sunos6|solaris3|'`
		;;
	-opened*)
		os=-openedition
		;;
        -os400*)
		os=-os400
		;;
	-wince*)
		os=-wince
		;;
	-osfrose*)
		os=-osfrose
		;;
	-osf*)
		os=-osf
		;;
	-utek*)
		os=-bsd
		;;
	-dynix*)
		os=-bsd
		;;
	-acis*)
		os=-aos
		;;
	-atheos*)
		os=-atheos
		;;
	-syllable*)
		os=-syllable
		;;
	-386bsd)
		os=-bsd
		;;
	-ctix* | -uts*)
		os=-sysv
		;;
	-nova*)
		os=-rtmk-nova
		;;
	-ns2 )
		os=-nextstep2
		;;
	-nsk*)
		os=-nsk
		;;
	# Preserve the version number of sinix5.
	-sinix5.*)
		os=`echo $os | sed -e 's|sinix|sysv|'`
		;;
	-sinix*)
		os=-sysv4
		;;
        -tpf*)
		os=-tpf
		;;
	-triton*)
		os=-sysv3
		;;
	-oss*)
		os=-sysv3
		;;
	-svr4)
		os=-sysv4
		;;
	-svr3)
		os=-sysv3
		;;
	-sysvr4)
		os=-sysv4
		;;
	# This must come after -sysvr4.
	-sysv*)
		;;
	-ose*)
		os=-ose
		;;
	-es1800*)
		os=-ose
		;;
	-xenix)
		os=-xenix
		;;
	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
		os=-mint
		;;
	-aros*)
		os=-aros
		;;
	-kaos*)
		os=-kaos
		;;
	-zvmoe)
		os=-zvmoe
		;;
	-dicos*)
		os=-dicos
		;;
        -nacl*)
	        ;;
	-none)
		;;
	*)
		# Get rid of the `-' at the beginning of $os.
		os=`echo $os | sed 's/[^-]*-//'`
		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
		exit 1
		;;
esac
else

# Here we handle the default operating systems that come with various machines.
# The value should be what the vendor currently ships out the door with their
# machine or put another way, the most popular os provided with the machine.

# Note that if you're going to try to match "-MANUFACTURER" here (say,
# "-sun"), then you have to tell the case statement up towards the top
# that MANUFACTURER isn't an operating system.  Otherwise, code above
# will signal an error saying that MANUFACTURER isn't an operating
# system, and we'll never get to this point.

case $basic_machine in
        score-*)
		os=-elf
		;;
        spu-*)
		os=-elf
		;;
	*-acorn)
		os=-riscix1.2
		;;
	arm*-rebel)
		os=-linux
		;;
	arm*-semi)
		os=-aout
		;;
        c4x-* | tic4x-*)
        	os=-coff
		;;
	tic54x-*)
		os=-coff
		;;
	tic55x-*)
		os=-coff
		;;
	tic6x-*)
		os=-coff
		;;
	# This must come before the *-dec entry.
	pdp10-*)
		os=-tops20
		;;
	pdp11-*)
		os=-none
		;;
	*-dec | vax-*)
		os=-ultrix4.2
		;;
	m68*-apollo)
		os=-domain
		;;
	i386-sun)
		os=-sunos4.0.2
		;;
	m68000-sun)
		os=-sunos3
		# This also exists in the configure program, but was not the
		# default.
		# os=-sunos4
		;;
	m68*-cisco)
		os=-aout
		;;
        mep-*)
		os=-elf
		;;
	mips*-cisco)
		os=-elf
		;;
	mips*-*)
		os=-elf
		;;
	or32-*)
		os=-coff
		;;
	*-tti)	# must be before sparc entry or we get the wrong os.
		os=-sysv3
		;;
	sparc-* | *-sun)
		os=-sunos4.1.1
		;;
	*-be)
		os=-beos
		;;
	*-haiku)
		os=-haiku
		;;
	*-ibm)
		os=-aix
		;;
    	*-knuth)
		os=-mmixware
		;;
	*-wec)
		os=-proelf
		;;
	*-winbond)
		os=-proelf
		;;
	*-oki)
		os=-proelf
		;;
	*-hp)
		os=-hpux
		;;
	*-hitachi)
		os=-hiux
		;;
	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
		os=-sysv
		;;
	*-cbm)
		os=-amigaos
		;;
	*-dg)
		os=-dgux
		;;
	*-dolphin)
		os=-sysv3
		;;
	m68k-ccur)
		os=-rtu
		;;
	m88k-omron*)
		os=-luna
		;;
	*-next )
		os=-nextstep
		;;
	*-sequent)
		os=-ptx
		;;
	*-crds)
		os=-unos
		;;
	*-ns)
		os=-genix
		;;
	i370-*)
		os=-mvs
		;;
	*-next)
		os=-nextstep3
		;;
	*-gould)
		os=-sysv
		;;
	*-highlevel)
		os=-bsd
		;;
	*-encore)
		os=-bsd
		;;
	*-sgi)
		os=-irix
		;;
	*-siemens)
		os=-sysv4
		;;
	*-masscomp)
		os=-rtu
		;;
	f30[01]-fujitsu | f700-fujitsu)
		os=-uxpv
		;;
	*-rom68k)
		os=-coff
		;;
	*-*bug)
		os=-coff
		;;
	*-apple)
		os=-macos
		;;
	*-atari*)
		os=-mint
		;;
	*)
		os=-none
		;;
esac
fi

# Here we handle the case where we know the os, and the CPU type, but not the
# manufacturer.  We pick the logical manufacturer.
vendor=unknown
case $basic_machine in
	*-unknown)
		case $os in
			-riscix*)
				vendor=acorn
				;;
			-sunos*)
				vendor=sun
				;;
			-cnk*|-aix*)
				vendor=ibm
				;;
			-beos*)
				vendor=be
				;;
			-hpux*)
				vendor=hp
				;;
			-mpeix*)
				vendor=hp
				;;
			-hiux*)
				vendor=hitachi
				;;
			-unos*)
				vendor=crds
				;;
			-dgux*)
				vendor=dg
				;;
			-luna*)
				vendor=omron
				;;
			-genix*)
				vendor=ns
				;;
			-mvs* | -opened*)
				vendor=ibm
				;;
			-os400*)
				vendor=ibm
				;;
			-ptx*)
				vendor=sequent
				;;
			-tpf*)
				vendor=ibm
				;;
			-vxsim* | -vxworks* | -windiss*)
				vendor=wrs
				;;
			-aux*)
				vendor=apple
				;;
			-hms*)
				vendor=hitachi
				;;
			-mpw* | -macos*)
				vendor=apple
				;;
			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
				vendor=atari
				;;
			-vos*)
				vendor=stratus
				;;
		esac
		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
		;;
esac

echo $basic_machine$os
exit

# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "timestamp='"
# time-stamp-format: "%:y-%02m-%02d"
# time-stamp-end: "'"
# End:

#!/bin/sh
# Looks for a suitable tclsh or jimsh in the PATH
# If not found, builds a bootstrap jimsh from source
d=`dirname "$0"`
PATH="$PATH:$d"
for tclsh in jimsh tclsh tclsh8.5 tclsh8.6 jimsh0; do
	{ $tclsh "$d/test-tclsh"; } 2>/dev/null && exit 0
done
echo 1>&2 "No installed jimsh or tclsh, building local bootstrap jimsh0"
for cc in ${CC_FOR_BUILD:-cc} gcc; do
	{ $cc -o "$d/jimsh0" "$d/jimsh0.c"; } 2>/dev/null || continue
	"$d/jimsh0" "$d/test-tclsh" && exit 0
done
echo 1>&2 "No working C compiler found. Tried ${CC_FOR_BUILD:-cc} and gcc."

# For this project, disable the pager for --help
set useropts(nopager) 1

# Copyright (c) 2010 WorkWare Systems http://www.workware.net.au/
# All rights reserved

# @synopsis:
#
# This module supports common system interrogation and options
# such as --host, --build, --prefix, and setting srcdir, builddir, and EXEXT.
#
# It also support the 'feature' naming convention, where searching
# for a feature such as sys/type.h defines HAVE_SYS_TYPES_H

# Note that the hidden options are supported for autoconf compatibility

module-options {
	host:host-alias =>		{a complete or partial cpu-vendor-opsys for the system where
							the application will run (defaults to the same value as --build)}
	build:build-alias =>	{a complete or partial cpu-vendor-opsys for the system
							where the application will be built (defaults to the
							result of running config.guess)}
	prefix:dir =>			{the target directory for the build (defaults to /usr/local)}

	includedir:
	mandir:
	infodir:
	libexecdir:
	sysconfdir:
	localstatedir:

	maintainer-mode=0
	dependency-tracking=0
}

# Returns 1 if exists, or 0 if  not
#
proc check-feature {name code} {
	msg-checking "Checking for $name..."
	set r [uplevel 1 $code]
	define-feature $name $r
	if {$r} {
		msg-result "ok"
	} else {
		msg-result "not found"
	}
	return $r
}

# @have-feature name ?default=0?
#
# Returns the value of the feature if defined, or $default if not.
# See 'feature-define-name' for how the feature name
# is translated into the define name.
#
proc have-feature {name {default 0}} {
	get-define [feature-define-name $name] $default
}

# @define-feature name ?value=1?
#
# Sets the feature 'define' to the given value.
# See 'feature-define-name' for how the feature name
# is translated into the define name.
#
proc define-feature {name {value 1}} {
	define [feature-define-name $name] $value
}

# @feature-checked name
#
# Returns 1 if the feature has been checked, whether true or not
#
proc feature-checked {name} {
	is-defined [feature-define-name $name]
}

# @feature-define-name name ?prefix=HAVE_?
#
# Converts a name to the corresponding define,
# e.g. sys/stat.h becomes HAVE_SYS_STAT_H.
#
# Converts * to P and all non-alphanumeric to underscore.
#
proc feature-define-name {name {prefix HAVE_}} {
	string toupper $prefix[regsub -all {[^a-zA-Z0-9]} [regsub -all {[*]} $name p] _]
}

# If $file doesn't exist, or it's contents are different than $buf,
# the file is written and $script is executed.
# Otherwise a "file is unchanged" message is displayed.
proc write-if-changed {file buf {script {}}} {
	set old [readfile $file ""]
	if {$old eq $buf && [file exists $file]} {
		msg-result "$file is unchanged"
	} else {
		writefile $file $buf\n
		uplevel 1 $script
	}
}

# @make-template template ?outfile?
#
# Reads the input file <srcdir>/$template and writes the output file $outfile.
# If $outfile is blank/omitted, $template should end with ".in" which
# is removed to create the output file name.
#
# Each pattern of the form @define@ is replaced the the corresponding
# define, if it exists, or left unchanged if not.
# 
# The special value @srcdir@ is subsituted with the relative
# path to the source directory from the directory where the output
# file is created. Use @top_srcdir@ for the absolute path.
#
proc make-template {template {out {}}} {
	set infile [file join $::autosetup(srcdir) $template]

	if {![file exists $infile]} {
		user-error "Template $template is missing"
	}

	# Define this as late as possible
	define AUTODEPS $::autosetup(deps)

	if {$out eq ""} {
		if {[file ext $template] ne ".in"} {
			autosetup-error "make_template $template has no target file and can't guess"
		}
		set out [file rootname $template]
	}

	set outdir [file dirname $out]

	# Make sure the directory exists
	file mkdir $outdir

	# Set up srcdir to be relative to the target dir
	define srcdir [relative-path [file join $::autosetup(srcdir) $outdir] $outdir]

	set mapping {}
	foreach {n v} [array get ::define] {
		lappend mapping @$n@ $v
	}
	writefile $out [string map $mapping [readfile $infile]]\n

	msg-result "Created [relative-path $out] from [relative-path $template]"
}

# build/host tuples and cross-compilation prefix
set build [opt-val build]
define build_alias $build
if {$build eq ""} {
	define build [config_guess]
} else {
	define build [config_sub $build]
}

set host [opt-val host]
define host_alias $host
if {$host eq ""} {
	define host [get-define build]
	set cross ""
} else {
	define host [config_sub $host]
	set cross $host-
}
define cross [get-env CROSS $cross]

set prefix [opt-val prefix /usr/local]

# These are for compatibility with autoconf
define target [get-define host]
define prefix $prefix
define builddir $autosetup(builddir)
define srcdir $autosetup(srcdir)
# Allow this to come from the environment
define top_srcdir [get-env top_srcdir [get-define srcdir]]

# And less common ones too
define exec_prefix \${prefix}
define bindir \${exec_prefix}/bin
define sbindir \${exec_prefix}/sbin
define libexecdir [get-env libexecdir \${exec_prefix}/libexec]
define datadir \${prefix}/share
define sysconfdir [get-env sysconfdir \${prefix}/etc]
define sharedstatedir \${prefix}/com
define localstatedir [get-env localstatedir \${prefix}/var]
define libdir \${exec_prefix}/lib
define infodir [get-env infodir \${prefix}/share/info]
define mandir [get-env mandir \${prefix}/share/man]
define includedir [get-env includdir \${prefix}/include]

define SHELL [get-env SHELL [find-an-executable sh bash ksh]]

# Windows vs. non-Windows
switch -glob -- [get-define host] {
	*-*-ming* - *-*-cygwin {
		define-feature windows
		define EXEEXT .exe
	}
	default {
		define EXEEXT ""
	}
}

# Display
msg-result "Host System...[get-define host]"
msg-result "Build System...[get-define build]"

# A small Tcl script to verify that the chosen
# interpreter works. Sometimes we might e.g. pick up
# an interpreter for a different arch.
# Outputs the full path to the interpreter

if {[catch {info version} version] == 0} {
	# This is Jim Tcl
	if {$version >= 0.70} {
		# Ensure that regexp works
		regexp (a.*?) a

		# Older versions of jimsh may return a relative path for [info nameofexecutable]
		puts [file join [pwd] [info nameofexecutable]]
		exit 0
	}
} elseif {[catch {info tclversion} version] == 0} {
	if {$version >= 8.5 && ![string match 8.5a* [info patchlevel]]} {
		puts [info nameofexecutable]
		exit 0
	}
}
exit 1

#!/bin/sh
dir="`dirname "$0"`/autosetup"
WRAPPER="$0" exec `"$dir/find-tclsh" || echo false` "$dir/autosetup" "$@"

  /* Commit */
  db_end_transaction(0);
  
  /* Do an autosync push, if requested */
  autosync(AUTOSYNC_PUSH);
}






































/*
** COMMAND: branch
**
** Usage: %fossil branch SUBCOMMAND ... ?-R|--repository FILE?
**
** Run various subcommands to manage branches of the open repository or
................................................................................
**        Create a new branch BRANCH-NAME off of check-in BASIS.
**        You can optionally give the branch a default color.  The
**        --private option makes the branch private.
**
**    %fossil branch list
**    %fossil branch ls
**
**        List all branches

**
*/
void branch_cmd(void){
  int n;
  const char *zCmd = "list";
  db_find_and_open_repository(0, 0);
  if( g.argc<2 ){
................................................................................
  n = strlen(zCmd);
  if( strncmp(zCmd,"new",n)==0 ){
    branch_new();
  }else if( (strncmp(zCmd,"list",n)==0)||(strncmp(zCmd, "ls", n)==0) ){
    Stmt q;
    int vid;
    char *zCurrent = 0;



    if( g.localOpen ){
      vid = db_lget_int("checkout", 0);
      zCurrent = db_text(0, "SELECT value FROM tagxref"
                            " WHERE rid=%d AND tagid=%d", vid, TAG_BRANCH);
    }
    db_prepare(&q,
      "SELECT DISTINCT value FROM tagxref"
      " WHERE tagid=%d AND value NOT NULL"
      "   AND rid IN leaf"
      "   AND NOT %z"
      " ORDER BY value /*sort*/",
      TAG_BRANCH, leaf_is_closed_sql("tagxref.rid")
    );
    while( db_step(&q)==SQLITE_ROW ){
      const char *zBr = db_column_text(&q, 0);
      int isCur = zCurrent!=0 && fossil_strcmp(zCurrent,zBr)==0;
      fossil_print("%s%s\n", (isCur ? "* " : "  "), zBr);
    }
    db_finalize(&q);
  }else{
................................................................................
**
** Show a timeline of all branches
*/
void brlist_page(void){
  Stmt q;
  int cnt;
  int showClosed = P("closed")!=0;


  login_check_credentials();
  if( !g.okRead ){ login_needed(); return; }

  style_header(showClosed ? "Closed Branches" : "Open Branches");

  style_submenu_element("Timeline", "Timeline", "brtimeline");
  if( showClosed ){

    style_submenu_element("Open","Open","brlist");



  }else{

    style_submenu_element("Closed","Closed","brlist?closed");
  }
  login_anonymous_available();
  style_sidebox_begin("Nomenclature:", "33%");
  @ <ol>
  @ <li> An <div class="sideboxDescribed"><a href="brlist">
  @ open branch</a></div> is a branch that has one or
................................................................................
  @ <div class="sideboxDescribed"><a href="leaves?closed">
  @ closed leaves</a></div>.
  @ Closed branches are fixed and do not change (unless they are first
  @ reopened)</li>
  @ </ol>
  style_sidebox_end();


  cnt = 0;
  if( showClosed ){
    db_prepare(&q,
      "SELECT value FROM tagxref"
      " WHERE tagid=%d AND value NOT NULL "
      "EXCEPT "
      "SELECT value FROM tagxref"
      " WHERE tagid=%d"
      "   AND rid IN leaf"
      "   AND NOT %z"
      " ORDER BY value /*sort*/",
      TAG_BRANCH, TAG_BRANCH, leaf_is_closed_sql("tagxref.rid")
    );
  }else{
    db_prepare(&q,
      "SELECT DISTINCT value FROM tagxref"
      " WHERE tagid=%d AND value NOT NULL"
      "   AND rid IN leaf"
      "   AND NOT %z"
      " ORDER BY value /*sort*/",
      TAG_BRANCH, leaf_is_closed_sql("tagxref.rid")
    );
  }
  while( db_step(&q)==SQLITE_ROW ){
    const char *zBr = db_column_text(&q, 0);
    if( cnt==0 ){
      if( showClosed ){
        @ <h2>Closed Branches:</h2>
      }else{
        @ <h2>Open Branches:</h2>

  /* Commit */
  db_end_transaction(0);
  
  /* Do an autosync push, if requested */
  autosync(AUTOSYNC_PUSH);
}

/*
** Prepare a query that will list all branches.
*/
static void prepareBranchQuery(Stmt *pQuery, int showAll, int showClosed){
  if( showClosed ){
    db_prepare(pQuery,
      "SELECT value FROM tagxref"
      " WHERE tagid=%d AND value NOT NULL "
      "EXCEPT "
      "SELECT value FROM tagxref"
      " WHERE tagid=%d"
      "   AND rid IN leaf"
      "   AND NOT %z"
      " ORDER BY value COLLATE nocase /*sort*/",
      TAG_BRANCH, TAG_BRANCH, leaf_is_closed_sql("tagxref.rid")
    );
  }else if( showAll ){
    db_prepare(pQuery,
      "SELECT DISTINCT value FROM tagxref"
      " WHERE tagid=%d AND value NOT NULL"
      "   AND rid IN leaf"
      " ORDER BY value COLLATE nocase /*sort*/",
      TAG_BRANCH
    );
  }else{
    db_prepare(pQuery,
      "SELECT DISTINCT value FROM tagxref"
      " WHERE tagid=%d AND value NOT NULL"
      "   AND rid IN leaf"
      "   AND NOT %z"
      " ORDER BY value COLLATE nocase /*sort*/",
      TAG_BRANCH, leaf_is_closed_sql("tagxref.rid")
    );
  }
}


/*
** COMMAND: branch
**
** Usage: %fossil branch SUBCOMMAND ... ?-R|--repository FILE?
**
** Run various subcommands to manage branches of the open repository or
................................................................................
**        Create a new branch BRANCH-NAME off of check-in BASIS.
**        You can optionally give the branch a default color.  The
**        --private option makes the branch private.
**
**    %fossil branch list
**    %fossil branch ls
**
**        List all branches.  Use --all or --closed to list all branches
**        or closed branches.  The default is to show only open branches.
**
*/
void branch_cmd(void){
  int n;
  const char *zCmd = "list";
  db_find_and_open_repository(0, 0);
  if( g.argc<2 ){
................................................................................
  n = strlen(zCmd);
  if( strncmp(zCmd,"new",n)==0 ){
    branch_new();
  }else if( (strncmp(zCmd,"list",n)==0)||(strncmp(zCmd, "ls", n)==0) ){
    Stmt q;
    int vid;
    char *zCurrent = 0;
    int showAll = find_option("all",0,0)!=0;
    int showClosed = find_option("closed",0,0)!=0;

    if( g.localOpen ){
      vid = db_lget_int("checkout", 0);
      zCurrent = db_text(0, "SELECT value FROM tagxref"
                            " WHERE rid=%d AND tagid=%d", vid, TAG_BRANCH);
    }
    prepareBranchQuery(&q, showAll, showClosed);







    while( db_step(&q)==SQLITE_ROW ){
      const char *zBr = db_column_text(&q, 0);
      int isCur = zCurrent!=0 && fossil_strcmp(zCurrent,zBr)==0;
      fossil_print("%s%s\n", (isCur ? "* " : "  "), zBr);
    }
    db_finalize(&q);
  }else{
................................................................................
**
** Show a timeline of all branches
*/
void brlist_page(void){
  Stmt q;
  int cnt;
  int showClosed = P("closed")!=0;
  int showAll = P("all")!=0;

  login_check_credentials();
  if( !g.okRead ){ login_needed(); return; }

  style_header(showClosed ? "Closed Branches" :
                  showAll ? "All Branches" : "Open Branches");
  style_submenu_element("Timeline", "Timeline", "brtimeline");
  if( showClosed ){
    style_submenu_element("All", "All", "brlist?all");
    style_submenu_element("Open","Open","brlist");
  }else if( showAll ){
    style_submenu_element("Closed", "Closed", "brlist?closed");
    style_submenu_element("Open","Open","brlist");
  }else{
    style_submenu_element("All", "All", "brlist?all");
    style_submenu_element("Closed","Closed","brlist?closed");
  }
  login_anonymous_available();
  style_sidebox_begin("Nomenclature:", "33%");
  @ <ol>
  @ <li> An <div class="sideboxDescribed"><a href="brlist">
  @ open branch</a></div> is a branch that has one or
................................................................................
  @ <div class="sideboxDescribed"><a href="leaves?closed">
  @ closed leaves</a></div>.
  @ Closed branches are fixed and do not change (unless they are first
  @ reopened)</li>
  @ </ol>
  style_sidebox_end();

  prepareBranchQuery(&q, showAll, showClosed);
  cnt = 0;






















  while( db_step(&q)==SQLITE_ROW ){
    const char *zBr = db_column_text(&q, 0);
    if( cnt==0 ){
      if( showClosed ){
        @ <h2>Closed Branches:</h2>
      }else{
        @ <h2>Open Branches:</h2>

    i++;
    zFN = db_column_text(&q, 0);
    if( zFN[0]=='/' ){
      zFN++;
      @ <li><a href="%s(zSubdirLink)%T(zFN)">%h(zFN)/</a></li>
    }else if( zCI ){
      const char *zUuid = db_column_text(&q, 1);
      @ <li><a href="%s(g.zTop)/artifact?name=%s(zUuid)">%h(zFN)</a></li>
    }else{
      @ <li><a href="%s(g.zTop)/finfo?name=%T(zPrefix)%T(zFN)">%h(zFN)
      @     </a></li>
    }
  }
  db_finalize(&q);
  manifest_destroy(pM);
  @ </ul></td></tr></table>
  style_footer();
}

    i++;
    zFN = db_column_text(&q, 0);
    if( zFN[0]=='/' ){
      zFN++;
      @ <li><a href="%s(zSubdirLink)%T(zFN)">%h(zFN)/</a></li>
    }else if( zCI ){
      const char *zUuid = db_column_text(&q, 1);
      @ <li><a href="%s(g.zTop)/artifact/%s(zUuid)">%h(zFN)</a></li>
    }else{
      @ <li><a href="%s(g.zTop)/finfo?name=%T(zPrefix)%T(zFN)">%h(zFN)
      @     </a></li>
    }
  }
  db_finalize(&q);
  manifest_destroy(pM);
  @ </ul></td></tr></table>
  style_footer();
}

    for(i=0; i<2; i++){
      size = blob_size(&cgiContent[i]);
      if( size>0 ){
        fwrite(blob_buffer(&cgiContent[i]), 1, size, g.httpOut);
      }
    }
  }

  CGIDEBUG(("DONE\n"));
}

/*
** Do a redirect request to the URL given in the argument.
**
** The URL must be relative to the base of the fossil server.
................................................................................
  va_end(ap);
  return 1;
}

/*
** Print all query parameters on standard output.  Format the
** parameters as HTML.  This is used for testing and debugging.


*/
void cgi_print_all(void){
  int i;





  cgi_parameter("","");  /* Force the parameters into sorted order */
  for(i=0; i<nUsedQP; i++){

    cgi_printf("%s = %s  <br />\n",
       htmlize(aParamQP[i].zName, -1), htmlize(aParamQP[i].zValue, -1));

  }
}

/*
** This routine works like "printf" except that it has the
** extra formatting capabilities such as %h and %t.
*/

    for(i=0; i<2; i++){
      size = blob_size(&cgiContent[i]);
      if( size>0 ){
        fwrite(blob_buffer(&cgiContent[i]), 1, size, g.httpOut);
      }
    }
  }
  fflush(g.httpOut);
  CGIDEBUG(("DONE\n"));
}

/*
** Do a redirect request to the URL given in the argument.
**
** The URL must be relative to the base of the fossil server.
................................................................................
  va_end(ap);
  return 1;
}

/*
** Print all query parameters on standard output.  Format the
** parameters as HTML.  This is used for testing and debugging.
** Release builds omit the values of the cookies to avoid defeating
** the purpose of setting HttpOnly cookies.
*/
void cgi_print_all(void){
  int i;
  int showAll = 0;
#ifdef FOSSIL_DEBUG
  /* Show the values of cookies in debug mode. */
  showAll = 1;
#endif
  cgi_parameter("","");  /* Force the parameters into sorted order */
  for(i=0; i<nUsedQP; i++){
    if( showAll || (fossil_stricmp("HTTP_COOKIE",aParamQP[i].zName)!=0 && fossil_strnicmp("fossil-",aParamQP[i].zName,7)!=0) ){
      cgi_printf("%s = %s  <br />\n",
         htmlize(aParamQP[i].zName, -1), htmlize(aParamQP[i].zValue, -1));
    }
  }
}

/*
** This routine works like "printf" except that it has the
** extra formatting capabilities such as %h and %t.
*/

**    --private                   Also clone private branches 
**    --ssl-identity=filename     Use the SSL identity if requested by the server
**
*/
void clone_cmd(void){
  char *zPassword;
  const char *zDefaultUser;   /* Optional name of the default user */

  int nErr = 0;
  int bPrivate;               /* Also clone private branches */

  bPrivate = find_option("private",0,0)!=0;
  url_proxy_options();
  if( g.argc < 4 ){
    usage("?OPTIONS? FILE-OR-URL NEW-REPOSITORY");
................................................................................
    );
    db_multi_exec(
       "DELETE FROM blob WHERE rid IN private;"
       "DELETE FROM delta wHERE rid IN private;"
       "DELETE FROM private;"
    );
    shun_artifacts();




    g.zLogin = db_text(0, "SELECT login FROM user WHERE cap LIKE '%%s%%'");
    if( g.zLogin==0 ){
      db_create_default_users(1,zDefaultUser);
    }
    fossil_print("Repository cloned into %s\n", g.argv[3]);
  }else{
    db_create_repository(g.argv[3]);
    db_open_repository(g.argv[3]);
    db_begin_transaction();
    db_record_repository_filename(g.argv[3]);
................................................................................
  db_begin_transaction();
  fossil_print("Rebuilding repository meta-data...\n");
  rebuild_db(0, 1, 0);
  fossil_print("project-id: %s\n", db_get("project-code", 0));
  fossil_print("server-id:  %s\n", db_get("server-code", 0));
  zPassword = db_text(0, "SELECT pw FROM user WHERE login=%Q", g.zLogin);
  fossil_print("admin-user: %s (password is \"%s\")\n", g.zLogin, zPassword);


  db_end_transaction(0);
}

**    --private                   Also clone private branches 
**    --ssl-identity=filename     Use the SSL identity if requested by the server
**
*/
void clone_cmd(void){
  char *zPassword;
  const char *zDefaultUser;   /* Optional name of the default user */
  const char *zPw;     /* The user clone password */
  int nErr = 0;
  int bPrivate;               /* Also clone private branches */

  bPrivate = find_option("private",0,0)!=0;
  url_proxy_options();
  if( g.argc < 4 ){
    usage("?OPTIONS? FILE-OR-URL NEW-REPOSITORY");
................................................................................
    );
    db_multi_exec(
       "DELETE FROM blob WHERE rid IN private;"
       "DELETE FROM delta wHERE rid IN private;"
       "DELETE FROM private;"
    );
    shun_artifacts();
    db_create_default_users(1, zDefaultUser);
    if( zDefaultUser ){
      g.zLogin = zDefaultUser;
    }else{
      g.zLogin = db_text(0, "SELECT login FROM user WHERE cap LIKE '%%s%%'");


    }
    fossil_print("Repository cloned into %s\n", g.argv[3]);
  }else{
    db_create_repository(g.argv[3]);
    db_open_repository(g.argv[3]);
    db_begin_transaction();
    db_record_repository_filename(g.argv[3]);
................................................................................
  db_begin_transaction();
  fossil_print("Rebuilding repository meta-data...\n");
  rebuild_db(0, 1, 0);
  fossil_print("project-id: %s\n", db_get("project-code", 0));
  fossil_print("server-id:  %s\n", db_get("server-code", 0));
  zPassword = db_text(0, "SELECT pw FROM user WHERE login=%Q", g.zLogin);
  fossil_print("admin-user: %s (password is \"%s\")\n", g.zLogin, zPassword);
  zPw = g.urlPasswd;
  if( !g.dontKeepUrl && zPw) db_set("last-sync-pw", obscure(zPw), 0);
  db_end_transaction(0);
}

** some linux distributions, and possibly other unixes as well.
*/
#define _LARGE_FILE       1
#ifndef _FILE_OFFSET_BITS
#  define _FILE_OFFSET_BITS 64
#endif
#define _LARGEFILE_SOURCE 1





#ifndef _RC_COMPILE_

/*
** System header files used by all modules
*/
#include <unistd.h>
................................................................................
#ifndef _RC_COMPILE_

#include "sqlite3.h"

/*
** On Solaris, getpass() will only return up to 8 characters. getpassphrase() returns up to 257.
*/
#if defined(__sun__) || defined(sun)
  #define getpass getpassphrase
#endif

/*
** Typedef for a 64-bit integer
*/
typedef sqlite3_int64 i64;

** some linux distributions, and possibly other unixes as well.
*/
#define _LARGE_FILE       1
#ifndef _FILE_OFFSET_BITS
#  define _FILE_OFFSET_BITS 64
#endif
#define _LARGEFILE_SOURCE 1

#ifdef HAVE_AUTOCONFIG_H
#include "autoconfig.h"
#endif

#ifndef _RC_COMPILE_

/*
** System header files used by all modules
*/
#include <unistd.h>
................................................................................
#ifndef _RC_COMPILE_

#include "sqlite3.h"

/*
** On Solaris, getpass() will only return up to 8 characters. getpassphrase() returns up to 257.
*/
#if HAVE_GETPASSPHRASE
  #define getpass getpassphrase
#endif

/*
** Typedef for a 64-bit integer
*/
typedef sqlite3_int64 i64;

  int i, n;
  char zPwd[2000];
  static const char *aDbName[] = { "/_FOSSIL_", "/.fos" };
  
  if( g.localOpen) return 1;
  file_getcwd(zPwd, sizeof(zPwd)-20);
  n = strlen(zPwd);

  while( n>0 ){
    if( file_access(zPwd, W_OK) ) break;
    for(i=0; i<sizeof(aDbName)/sizeof(aDbName[0]); i++){
      sqlite3_snprintf(sizeof(zPwd)-n, &zPwd[n], "%s", aDbName[i]);
      if( isValidLocalDb(zPwd) ){
        /* Found a valid checkout database file */
        zPwd[n] = 0;
................................................................................
  db_delete_on_failure(zFilename);
}

/*
** Create the default user accounts in the USER table.
*/
void db_create_default_users(int setupUserOnly, const char *zDefaultUser){
  const char *zUser;
  zUser = db_get("default-user", 0);
  if( zUser==0 ){
    zUser = zDefaultUser;

  }
  if( zUser==0 ){
#if defined(_WIN32)
    zUser = getenv("USERNAME");
#else
    zUser = getenv("USER");
#endif
  }
  if( zUser==0 ){
    zUser = "root";
  }
  db_multi_exec(
     "INSERT INTO user(login, pw, cap, info)"


     "VALUES(%Q,lower(hex(randomblob(3))),'s','')", zUser

  );
  if( !setupUserOnly ){
    db_multi_exec(
       "INSERT INTO user(login,pw,cap,info)"
       "   VALUES('anonymous',hex(randomblob(8)),'hmncz','Anon');"
       "INSERT INTO user(login,pw,cap,info)"
       "   VALUES('nobody','','gjor','Nobody');"
................................................................................
      db_unset(ctrlSettings[i].name, globalFlag);
    }else if( g.argc==4 ){
      db_set(ctrlSettings[i].name, g.argv[3], globalFlag);
    }else{
      isManifest = 0;
      print_setting(&ctrlSettings[i], db_open_local());
    }
    if( isManifest ){
      manifest_to_disk(db_lget_int("checkout", 0));
    }
  }else{
    usage("?PROPERTY? ?VALUE?");
  }
}

  int i, n;
  char zPwd[2000];
  static const char *aDbName[] = { "/_FOSSIL_", "/.fos" };
  
  if( g.localOpen) return 1;
  file_getcwd(zPwd, sizeof(zPwd)-20);
  n = strlen(zPwd);
  if( n==1 && zPwd[0]=='/' ) zPwd[0] = '.';
  while( n>0 ){
    if( file_access(zPwd, W_OK) ) break;
    for(i=0; i<sizeof(aDbName)/sizeof(aDbName[0]); i++){
      sqlite3_snprintf(sizeof(zPwd)-n, &zPwd[n], "%s", aDbName[i]);
      if( isValidLocalDb(zPwd) ){
        /* Found a valid checkout database file */
        zPwd[n] = 0;
................................................................................
  db_delete_on_failure(zFilename);
}

/*
** Create the default user accounts in the USER table.
*/
void db_create_default_users(int setupUserOnly, const char *zDefaultUser){
  const char *zUser = zDefaultUser;

  if( zUser==0 ){

    zUser = db_get("default-user", 0);
  }
  if( zUser==0 ){
#if defined(_WIN32)
    zUser = getenv("USERNAME");
#else
    zUser = getenv("USER");
#endif
  }
  if( zUser==0 ){
    zUser = "root";
  }
  db_multi_exec(
     "INSERT OR IGNORE INTO user(login, info) VALUES(%Q,'')", zUser
  );
  db_multi_exec(
     "UPDATE user SET cap='s', pw=lower(hex(randomblob(3)))"
     " WHERE login=%Q", zUser
  );
  if( !setupUserOnly ){
    db_multi_exec(
       "INSERT INTO user(login,pw,cap,info)"
       "   VALUES('anonymous',hex(randomblob(8)),'hmncz','Anon');"
       "INSERT INTO user(login,pw,cap,info)"
       "   VALUES('nobody','','gjor','Nobody');"
................................................................................
      db_unset(ctrlSettings[i].name, globalFlag);
    }else if( g.argc==4 ){
      db_set(ctrlSettings[i].name, g.argv[3], globalFlag);
    }else{
      isManifest = 0;
      print_setting(&ctrlSettings[i], db_open_local());
    }
    if( isManifest && g.localOpen ){
      manifest_to_disk(db_lget_int("checkout", 0));
    }
  }else{
    usage("?PROPERTY? ?VALUE?");
  }
}

    @ </script>
  }
}


/*
** WEBPAGE: artifact
** URL: /artifact?name=ARTIFACTID
** URL: /artifact?ci=CHECKIN&filename=PATH






** 
** Show the complete content of a file identified by ARTIFACTID
** as preformatted text.
*/
void artifact_page(void){
  int rid = 0;
  Blob content;
................................................................................
  style_submenu_element("Download", "Download", 
          "%s/raw/%T?name=%s", g.zTop, blob_str(&downloadName), zUuid);
  zMime = mimetype_from_name(blob_str(&downloadName));
  if( zMime ){
    if( fossil_strcmp(zMime, "text/html")==0 ){
      if( P("txt") ){
        style_submenu_element("Html", "Html",
                              "%s/artifact?name=%s", g.zTop, zUuid);
      }else{
        renderAsHtml = 1;
        style_submenu_element("Text", "Text",
                              "%s/artifact?name=%s&amp;txt=1", g.zTop, zUuid);
      }
    }else if( fossil_strcmp(zMime, "application/x-fossil-wiki")==0 ){
      if( P("txt") ){
        style_submenu_element("Wiki", "Wiki",
                              "%s/artifact?name=%s", g.zTop, zUuid);
      }else{
        renderAsWiki = 1;
        style_submenu_element("Text", "Text",
                              "%s/artifact?name=%s&amp;txt=1", g.zTop, zUuid);
      }
    }
  }
  @ </p></blockquote>
  @ <hr />
  content_get(rid, &content);
  if( renderAsWiki ){

    @ </script>
  }
}


/*
** WEBPAGE: artifact
** URL: /artifact/ARTIFACTID
** URL: /artifact?ci=CHECKIN&filename=PATH
**
** Additional query parameters:
**
**   ln              - show line numbers
**   ln=N            - highlight line number N
**   ln=M-N          - highlight lines M through N inclusive
** 
** Show the complete content of a file identified by ARTIFACTID
** as preformatted text.
*/
void artifact_page(void){
  int rid = 0;
  Blob content;
................................................................................
  style_submenu_element("Download", "Download", 
          "%s/raw/%T?name=%s", g.zTop, blob_str(&downloadName), zUuid);
  zMime = mimetype_from_name(blob_str(&downloadName));
  if( zMime ){
    if( fossil_strcmp(zMime, "text/html")==0 ){
      if( P("txt") ){
        style_submenu_element("Html", "Html",
                              "%s/artifact/%s", g.zTop, zUuid);
      }else{
        renderAsHtml = 1;
        style_submenu_element("Text", "Text",
                              "%s/artifact/%s?txt=1", g.zTop, zUuid);
      }
    }else if( fossil_strcmp(zMime, "application/x-fossil-wiki")==0 ){
      if( P("txt") ){
        style_submenu_element("Wiki", "Wiki",
                              "%s/artifact/%s", g.zTop, zUuid);
      }else{
        renderAsWiki = 1;
        style_submenu_element("Text", "Text",
                              "%s/artifact/%s?txt=1", g.zTop, zUuid);
      }
    }
  }
  @ </p></blockquote>
  @ <hr />
  content_get(rid, &content);
  if( renderAsWiki ){

      continue;
    }
    if( blob_eq(&key, "HOME:") && blob_token(&line, &value) ){
      cgi_setenv("HOME", blob_str(&value));
      blob_reset(&value);
      continue;
    }
    if( blob_eq(&key, "repository:") && blob_token(&line, &value) ){

      db_open_repository(blob_str(&value));
      blob_reset(&value);
      continue;
    }
    if( blob_eq(&key, "directory:") && blob_token(&line, &value) ){
      db_close(1);
      g.zRepositoryName = mprintf("%s", blob_str(&value));
................................................................................
#else
  /* Win32 implementation */
  if( isUiCmd ){
    zBrowser = db_get("web-browser", "start");
    zBrowserCmd = mprintf("%s http://127.0.0.1:%%d/", zBrowser);
  }
  db_close(1);

  win32_http_server(iPort, mxPort, zBrowserCmd, zStopperFile, zNotFound, flags);


#endif
}

/*
** COMMAND:  test-echo
**
** Echo all command-line arguments (enclosed in [...]) to the screen so that

      continue;
    }
    if( blob_eq(&key, "HOME:") && blob_token(&line, &value) ){
      cgi_setenv("HOME", blob_str(&value));
      blob_reset(&value);
      continue;
    }
    if( blob_eq(&key, "repository:") && blob_tail(&line, &value) ){
      blob_trim(&value);
      db_open_repository(blob_str(&value));
      blob_reset(&value);
      continue;
    }
    if( blob_eq(&key, "directory:") && blob_token(&line, &value) ){
      db_close(1);
      g.zRepositoryName = mprintf("%s", blob_str(&value));
................................................................................
#else
  /* Win32 implementation */
  if( isUiCmd ){
    zBrowser = db_get("web-browser", "start");
    zBrowserCmd = mprintf("%s http://127.0.0.1:%%d/", zBrowser);
  }
  db_close(1);
  if( win32_http_service(iPort, zNotFound, flags) ){
    win32_http_server(iPort, mxPort, zBrowserCmd,
                      zStopperFile, zNotFound, flags);
  }
#endif
}

/*
** COMMAND:  test-echo
**
** Echo all command-line arguments (enclosed in [...]) to the screen so that

# the repository after running the tests.
test:	$(APPNAME)
	$(TCLSH) test/tester.tcl $(APPNAME)

$(OBJDIR)/VERSION.h:	$(SRCDIR)/../manifest.uuid $(SRCDIR)/../manifest $(SRCDIR)/../VERSION $(OBJDIR)/mkversion
	$(OBJDIR)/mkversion $(SRCDIR)/../manifest.uuid  $(SRCDIR)/../manifest  $(SRCDIR)/../VERSION >$(OBJDIR)/VERSION.h









EXTRAOBJ =  $(OBJDIR)/sqlite3.o  $(OBJDIR)/shell.o  $(OBJDIR)/th.o  $(OBJDIR)/th_lang.o

$(APPNAME):	$(OBJDIR)/headers $(OBJ) $(EXTRAOBJ)
	$(TCC) -o $(APPNAME) $(OBJ) $(EXTRAOBJ) $(LIB)

# This rule prevents make from using its default rules to try build
# an executable named "manifest" out of the file named "manifest.c"
#
................................................................................
$(OBJDIR)/zip.o:	$(OBJDIR)/zip_.c $(OBJDIR)/zip.h  $(SRCDIR)/config.h
	$(XTCC) -o $(OBJDIR)/zip.o -c $(OBJDIR)/zip_.c

$(OBJDIR)/zip.h:	$(OBJDIR)/headers
$(OBJDIR)/sqlite3.o:	$(SRCDIR)/sqlite3.c
	$(XTCC) -DSQLITE_OMIT_LOAD_EXTENSION=1 -DSQLITE_THREADSAFE=0 -DSQLITE_DEFAULT_FILE_FORMAT=4 -DSQLITE_ENABLE_STAT2 -Dlocaltime=fossil_localtime -DSQLITE_ENABLE_LOCKING_STYLE=0 -c $(SRCDIR)/sqlite3.c -o $(OBJDIR)/sqlite3.o

$(OBJDIR)/shell.o:	$(SRCDIR)/shell.c
	$(XTCC) -Dmain=sqlite3_shell -DSQLITE_OMIT_LOAD_EXTENSION=1 -c $(SRCDIR)/shell.c -o $(OBJDIR)/shell.o

$(OBJDIR)/th.o:	$(SRCDIR)/th.c
	$(XTCC) -I$(SRCDIR) -c $(SRCDIR)/th.c -o $(OBJDIR)/th.o

$(OBJDIR)/th_lang.o:	$(SRCDIR)/th_lang.c
	$(XTCC) -I$(SRCDIR) -c $(SRCDIR)/th_lang.c -o $(OBJDIR)/th_lang.o

# the repository after running the tests.
test:	$(APPNAME)
	$(TCLSH) test/tester.tcl $(APPNAME)

$(OBJDIR)/VERSION.h:	$(SRCDIR)/../manifest.uuid $(SRCDIR)/../manifest $(SRCDIR)/../VERSION $(OBJDIR)/mkversion
	$(OBJDIR)/mkversion $(SRCDIR)/../manifest.uuid  $(SRCDIR)/../manifest  $(SRCDIR)/../VERSION >$(OBJDIR)/VERSION.h

# The USE_SYSTEM_SQLITE variable may be undefined, set to 0, or set
# to 1. If it is set to 1, then there is no need to build or link
# the sqlite3.o object. Instead, the system sqlite will be linked
# using -lsqlite3.
SQLITE3_OBJ.1 = 
SQLITE3_OBJ.0 = $(OBJDIR)/sqlite3.o
SQLITE3_OBJ.  = $(SQLITE3_OBJ.0)

EXTRAOBJ =  $(SQLITE3_OBJ.$(USE_SYSTEM_SQLITE))  $(OBJDIR)/shell.o  $(OBJDIR)/th.o  $(OBJDIR)/th_lang.o

$(APPNAME):	$(OBJDIR)/headers $(OBJ) $(EXTRAOBJ)
	$(TCC) -o $(APPNAME) $(OBJ) $(EXTRAOBJ) $(LIB)

# This rule prevents make from using its default rules to try build
# an executable named "manifest" out of the file named "manifest.c"
#
................................................................................
$(OBJDIR)/zip.o:	$(OBJDIR)/zip_.c $(OBJDIR)/zip.h  $(SRCDIR)/config.h
	$(XTCC) -o $(OBJDIR)/zip.o -c $(OBJDIR)/zip_.c

$(OBJDIR)/zip.h:	$(OBJDIR)/headers
$(OBJDIR)/sqlite3.o:	$(SRCDIR)/sqlite3.c
	$(XTCC) -DSQLITE_OMIT_LOAD_EXTENSION=1 -DSQLITE_THREADSAFE=0 -DSQLITE_DEFAULT_FILE_FORMAT=4 -DSQLITE_ENABLE_STAT2 -Dlocaltime=fossil_localtime -DSQLITE_ENABLE_LOCKING_STYLE=0 -c $(SRCDIR)/sqlite3.c -o $(OBJDIR)/sqlite3.o

$(OBJDIR)/shell.o:	$(SRCDIR)/shell.c $(SRCDIR)/sqlite3.h
	$(XTCC) -Dmain=sqlite3_shell -DSQLITE_OMIT_LOAD_EXTENSION=1 -c $(SRCDIR)/shell.c -o $(OBJDIR)/shell.o

$(OBJDIR)/th.o:	$(SRCDIR)/th.c
	$(XTCC) -I$(SRCDIR) -c $(SRCDIR)/th.c -o $(OBJDIR)/th.o

$(OBJDIR)/th_lang.o:	$(SRCDIR)/th_lang.c
	$(XTCC) -I$(SRCDIR) -c $(SRCDIR)/th_lang.c -o $(OBJDIR)/th_lang.o

	$(TCLSH) test/tester.tcl $(APPNAME)

$(OBJDIR)/VERSION.h:	$(SRCDIR)/../manifest.uuid $(SRCDIR)/../manifest $(SRCDIR)/../VERSION $(OBJDIR)/mkversion
	$(OBJDIR)/mkversion $(SRCDIR)/../manifest.uuid \
		$(SRCDIR)/../manifest \
		$(SRCDIR)/../VERSION >$(OBJDIR)/VERSION.h









EXTRAOBJ = \
  $(OBJDIR)/sqlite3.o \

  $(OBJDIR)/shell.o \
  $(OBJDIR)/th.o \
  $(OBJDIR)/th_lang.o

$(APPNAME):	$(OBJDIR)/headers $(OBJ) $(EXTRAOBJ)
	$(TCC) -o $(APPNAME) $(OBJ) $(EXTRAOBJ) $(LIB)

................................................................................
#append opt " -DSQLITE_ENABLE_FTS3=1"
append opt " -DSQLITE_ENABLE_STAT2"
append opt " -Dlocaltime=fossil_localtime"
append opt " -DSQLITE_ENABLE_LOCKING_STYLE=0"
set SQLITE_OPTIONS $opt
writeln "\t\$(XTCC) $opt -c \$(SRCDIR)/sqlite3.c -o \$(OBJDIR)/sqlite3.o\n"

writeln "\$(OBJDIR)/shell.o:\t\$(SRCDIR)/shell.c"
set opt {-Dmain=sqlite3_shell}
append opt " -DSQLITE_OMIT_LOAD_EXTENSION=1"
writeln "\t\$(XTCC) $opt -c \$(SRCDIR)/shell.c -o \$(OBJDIR)/shell.o\n"

writeln "\$(OBJDIR)/th.o:\t\$(SRCDIR)/th.c"
writeln "\t\$(XTCC) -I\$(SRCDIR) -c \$(SRCDIR)/th.c -o \$(OBJDIR)/th.o\n"

................................................................................
# WARNING. DANGER. Running the testsuite modifies the repository the
# build is done from, i.e. the checkout belongs to. Do not sync/push
# the repository after running the tests.
test:	$(APPNAME)
	$(TCLSH) test/tester.tcl $(APPNAME)

$(OBJDIR)/VERSION.h:	$(SRCDIR)/../manifest.uuid $(SRCDIR)/../manifest $(VERSION)
	$(VERSION) $(SRCDIR)/../manifest.uuid $(SRCDIR)/../manifest >$(OBJDIR)/VERSION.h

EXTRAOBJ = \
  $(OBJDIR)/sqlite3.o \
  $(OBJDIR)/shell.o \
  $(OBJDIR)/th.o \
  $(OBJDIR)/th_lang.o

................................................................................
}


writeln "\$(OBJDIR)/sqlite3.o:\t\$(SRCDIR)/sqlite3.c"
set opt $SQLITE_OPTIONS
writeln "\t\$(XTCC) $opt -c \$(SRCDIR)/sqlite3.c -o \$(OBJDIR)/sqlite3.o\n"

writeln "\$(OBJDIR)/shell.o:\t\$(SRCDIR)/shell.c"
set opt {-Dmain=sqlite3_shell}
append opt " -DSQLITE_OMIT_LOAD_EXTENSION=1"
writeln "\t\$(XTCC) $opt -c \$(SRCDIR)/shell.c -o \$(OBJDIR)/shell.o\n"

writeln "\$(OBJDIR)/th.o:\t\$(SRCDIR)/th.c"
writeln "\t\$(XTCC) -I\$(SRCDIR) -c \$(SRCDIR)/th.c -o \$(OBJDIR)/th.o\n"

................................................................................

$(OBJDIR)\th$O : $(SRCDIR)\th.c
	$(TCC) -o$@ -c $**

$(OBJDIR)\th_lang$O : $(SRCDIR)\th_lang.c
	$(TCC) -o$@ -c $**

VERSION.h : version$E $B\manifest.uuid $B\manifest
	+$** > $@

page_index.h: mkindex$E $(SRC) 
	+$** > $@

clean:
	-del $(OBJDIR)\*.obj
................................................................................
ZLIB    = zlib.lib

INCL   = -I. -I$(SRCDIR) -I$B\win\include -I$(MSCDIR)\extra\include -I$(ZINCDIR)

CFLAGS = -nologo -MT -O2
BCC    = $(CC) $(CFLAGS)
TCC    = $(CC) -c $(CFLAGS) $(MSCDEF) $(SSL) $(INCL)
LIBS   = $(ZLIB) ws2_32.lib $(SSLLIB)
LIBDIR = -LIBPATH:$(MSCDIR)\extra\lib -LIBPATH:$(ZLIBDIR)
}
regsub -all {[-]D} $SQLITE_OPTIONS {/D} MSC_SQLITE_OPTIONS
writeln "SQLITE_OPTIONS = $MSC_SQLITE_OPTIONS\n"
writeln -nonewline "SRC   = "
foreach s [lsort $src] {
  writeln -nonewline "${s}_.c "
................................................................................

makeheaders$E: $(SRCDIR)\makeheaders.c
	$(BCC) $**

mkindex$E: $(SRCDIR)\mkindex.c
	$(BCC) $**

version$E: $B\src\mkversion.c
	$(BCC) $**

$(OX)\shell$O : $(SRCDIR)\shell.c
	$(TCC) /Fo$@ /Dmain=sqlite3_shell $(SQLITE_OPTIONS) -c $(SRCDIR)\shell.c

$(OX)\sqlite3$O : $(SRCDIR)\sqlite3.c
	$(TCC) /Fo$@ -c $(SQLITE_OPTIONS) $**
................................................................................

$(OX)\th$O : $(SRCDIR)\th.c
	$(TCC) /Fo$@ -c $**

$(OX)\th_lang$O : $(SRCDIR)\th_lang.c
	$(TCC) /Fo$@ -c $**

VERSION.h : version$E $B\manifest.uuid $B\manifest
	$** > $@

page_index.h: mkindex$E $(SRC) 
	$** > $@

clean:
	-del $(OX)\*.obj
................................................................................
	translate.exe $< >$@

# generate the index source, containing all web references,..
page_index.h:	$(TRANSLATEDSRC) mkindex.exe
	mkindex.exe $(TRANSLATEDSRC) >$@

# extracting version info from manifest
VERSION.h:	version.exe ..\manifest.uuid ..\manifest
	version.exe ..\manifest.uuid ..\manifest  > $@

# generate the simplified headers
headers: makeheaders.exe page_index.h VERSION.h ../src/sqlite3.h ../src/th.h VERSION.h
	makeheaders.exe $(foreach ts,$(TRANSLATEDSRC),$(ts):$(ts:_.c=.h)) ../src/sqlite3.h ../src/th.h VERSION.h
	echo Done >$@

# compile C sources with relevant options

	$(TCLSH) test/tester.tcl $(APPNAME)

$(OBJDIR)/VERSION.h:	$(SRCDIR)/../manifest.uuid $(SRCDIR)/../manifest $(SRCDIR)/../VERSION $(OBJDIR)/mkversion
	$(OBJDIR)/mkversion $(SRCDIR)/../manifest.uuid \
		$(SRCDIR)/../manifest \
		$(SRCDIR)/../VERSION >$(OBJDIR)/VERSION.h

# The USE_SYSTEM_SQLITE variable may be undefined, set to 0, or set
# to 1. If it is set to 1, then there is no need to build or link
# the sqlite3.o object. Instead, the system sqlite will be linked
# using -lsqlite3.
SQLITE3_OBJ.1 = 
SQLITE3_OBJ.0 = $(OBJDIR)/sqlite3.o
SQLITE3_OBJ.  = $(SQLITE3_OBJ.0)

EXTRAOBJ = \

  $(SQLITE3_OBJ.$(USE_SYSTEM_SQLITE)) \
  $(OBJDIR)/shell.o \
  $(OBJDIR)/th.o \
  $(OBJDIR)/th_lang.o

$(APPNAME):	$(OBJDIR)/headers $(OBJ) $(EXTRAOBJ)
	$(TCC) -o $(APPNAME) $(OBJ) $(EXTRAOBJ) $(LIB)

................................................................................
#append opt " -DSQLITE_ENABLE_FTS3=1"
append opt " -DSQLITE_ENABLE_STAT2"
append opt " -Dlocaltime=fossil_localtime"
append opt " -DSQLITE_ENABLE_LOCKING_STYLE=0"
set SQLITE_OPTIONS $opt
writeln "\t\$(XTCC) $opt -c \$(SRCDIR)/sqlite3.c -o \$(OBJDIR)/sqlite3.o\n"

writeln "\$(OBJDIR)/shell.o:\t\$(SRCDIR)/shell.c \$(SRCDIR)/sqlite3.h"
set opt {-Dmain=sqlite3_shell}
append opt " -DSQLITE_OMIT_LOAD_EXTENSION=1"
writeln "\t\$(XTCC) $opt -c \$(SRCDIR)/shell.c -o \$(OBJDIR)/shell.o\n"

writeln "\$(OBJDIR)/th.o:\t\$(SRCDIR)/th.c"
writeln "\t\$(XTCC) -I\$(SRCDIR) -c \$(SRCDIR)/th.c -o \$(OBJDIR)/th.o\n"

................................................................................
# WARNING. DANGER. Running the testsuite modifies the repository the
# build is done from, i.e. the checkout belongs to. Do not sync/push
# the repository after running the tests.
test:	$(APPNAME)
	$(TCLSH) test/tester.tcl $(APPNAME)

$(OBJDIR)/VERSION.h:	$(SRCDIR)/../manifest.uuid $(SRCDIR)/../manifest $(VERSION)
	$(VERSION) $(SRCDIR)/../manifest.uuid $(SRCDIR)/../manifest $(SRCDIR)/../VERSION >$(OBJDIR)/VERSION.h

EXTRAOBJ = \
  $(OBJDIR)/sqlite3.o \
  $(OBJDIR)/shell.o \
  $(OBJDIR)/th.o \
  $(OBJDIR)/th_lang.o

................................................................................
}


writeln "\$(OBJDIR)/sqlite3.o:\t\$(SRCDIR)/sqlite3.c"
set opt $SQLITE_OPTIONS
writeln "\t\$(XTCC) $opt -c \$(SRCDIR)/sqlite3.c -o \$(OBJDIR)/sqlite3.o\n"

writeln "\$(OBJDIR)/shell.o:\t\$(SRCDIR)/shell.c \$(SRCDIR)/sqlite3.h"
set opt {-Dmain=sqlite3_shell}
append opt " -DSQLITE_OMIT_LOAD_EXTENSION=1"
writeln "\t\$(XTCC) $opt -c \$(SRCDIR)/shell.c -o \$(OBJDIR)/shell.o\n"

writeln "\$(OBJDIR)/th.o:\t\$(SRCDIR)/th.c"
writeln "\t\$(XTCC) -I\$(SRCDIR) -c \$(SRCDIR)/th.c -o \$(OBJDIR)/th.o\n"

................................................................................

$(OBJDIR)\th$O : $(SRCDIR)\th.c
	$(TCC) -o$@ -c $**

$(OBJDIR)\th_lang$O : $(SRCDIR)\th_lang.c
	$(TCC) -o$@ -c $**

VERSION.h : version$E $B\manifest.uuid $B\manifest $B\VERSION
	+$** > $@

page_index.h: mkindex$E $(SRC) 
	+$** > $@

clean:
	-del $(OBJDIR)\*.obj
................................................................................
ZLIB    = zlib.lib

INCL   = -I. -I$(SRCDIR) -I$B\win\include -I$(MSCDIR)\extra\include -I$(ZINCDIR)

CFLAGS = -nologo -MT -O2
BCC    = $(CC) $(CFLAGS)
TCC    = $(CC) -c $(CFLAGS) $(MSCDEF) $(SSL) $(INCL)
LIBS   = $(ZLIB) ws2_32.lib advapi32.lib $(SSLLIB)
LIBDIR = -LIBPATH:$(MSCDIR)\extra\lib -LIBPATH:$(ZLIBDIR)
}
regsub -all {[-]D} $SQLITE_OPTIONS {/D} MSC_SQLITE_OPTIONS
writeln "SQLITE_OPTIONS = $MSC_SQLITE_OPTIONS\n"
writeln -nonewline "SRC   = "
foreach s [lsort $src] {
  writeln -nonewline "${s}_.c "
................................................................................

makeheaders$E: $(SRCDIR)\makeheaders.c
	$(BCC) $**

mkindex$E: $(SRCDIR)\mkindex.c
	$(BCC) $**

mkversion$E: $B\src\mkversion.c
	$(BCC) $**

$(OX)\shell$O : $(SRCDIR)\shell.c
	$(TCC) /Fo$@ /Dmain=sqlite3_shell $(SQLITE_OPTIONS) -c $(SRCDIR)\shell.c

$(OX)\sqlite3$O : $(SRCDIR)\sqlite3.c
	$(TCC) /Fo$@ -c $(SQLITE_OPTIONS) $**
................................................................................

$(OX)\th$O : $(SRCDIR)\th.c
	$(TCC) /Fo$@ -c $**

$(OX)\th_lang$O : $(SRCDIR)\th_lang.c
	$(TCC) /Fo$@ -c $**

VERSION.h : mkversion$E $B\manifest.uuid $B\manifest $B\VERSION
	$** > $@

page_index.h: mkindex$E $(SRC) 
	$** > $@

clean:
	-del $(OX)\*.obj
................................................................................
	translate.exe $< >$@

# generate the index source, containing all web references,..
page_index.h:	$(TRANSLATEDSRC) mkindex.exe
	mkindex.exe $(TRANSLATEDSRC) >$@

# extracting version info from manifest
VERSION.h:	version.exe ..\manifest.uuid ..\manifest ..\VERSION
	version.exe ..\manifest.uuid ..\manifest ..\VERSION  > $@

# generate the simplified headers
headers: makeheaders.exe page_index.h VERSION.h ../src/sqlite3.h ../src/th.h VERSION.h
	makeheaders.exe $(foreach ts,$(TRANSLATEDSRC),$(ts):$(ts:_.c=.h)) ../src/sqlite3.h ../src/th.h VERSION.h
	echo Done >$@

# compile C sources with relevant options

    return +1;
  }else{
    int a, b;
    do{ 
      a = *zA++;
      b = *zB++;
    }while( a==b && a!=0 );
    return a - b;
  }
}

/*
** Case insensitive string comparison.
*/
int fossil_strnicmp(const char *zA, const char *zB, int nByte){

    return +1;
  }else{
    int a, b;
    do{ 
      a = *zA++;
      b = *zB++;
    }while( a==b && a!=0 );
    return ((unsigned char)a) - (unsigned char)b;
  }
}

/*
** Case insensitive string comparison.
*/
int fossil_strnicmp(const char *zA, const char *zB, int nByte){

  zPassword = db_text(0, "SELECT pw FROM user WHERE login=%Q", g.zLogin);
  fossil_print("admin-user: %s (initial password is \"%s\")\n", g.zLogin, zPassword);
}

/*
** COMMAND: deconstruct
**
** Usage %fossil deconstruct ?OPTIONS? DESTIONATION
**
** Options:
**   -R|--repository REPOSITORY
**   -L|--prefixlength N
**
** This command exports all artifacts of a given repository and
** writes all artifacts to the file system. The DESTINATION directory

  zPassword = db_text(0, "SELECT pw FROM user WHERE login=%Q", g.zLogin);
  fossil_print("admin-user: %s (initial password is \"%s\")\n", g.zLogin, zPassword);
}

/*
** COMMAND: deconstruct
**
** Usage %fossil deconstruct ?OPTIONS? DESTINATION
**
** Options:
**   -R|--repository REPOSITORY
**   -L|--prefixlength N
**
** This command exports all artifacts of a given repository and
** writes all artifacts to the file system. The DESTINATION directory

**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.7.7"
#define SQLITE_VERSION_NUMBER 3007007
#define SQLITE_SOURCE_ID      "2011-06-15 13:11:06 f9750870ee04935f338e4d808900fee5a8b2b389"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version, sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
................................................................................
**
** ^The sqlite3_exec() interface runs zero or more UTF-8 encoded,
** semicolon-separate SQL statements passed into its 2nd argument,
** in the context of the [database connection] passed in as its 1st
** argument.  ^If the callback function of the 3rd argument to
** sqlite3_exec() is not NULL, then it is invoked for each result row
** coming out of the evaluated SQL statements.  ^The 4th argument to
** to sqlite3_exec() is relayed through to the 1st argument of each
** callback invocation.  ^If the callback pointer to sqlite3_exec()
** is NULL, then no callback is ever invoked and result rows are
** ignored.
**
** ^If an error occurs while evaluating the SQL statements passed into
** sqlite3_exec(), then execution of the current statement stops and
** subsequent statements are skipped.  ^If the 5th parameter to sqlite3_exec()
................................................................................
** of good-quality randomness into zOut.  The return value is
** the actual number of bytes of randomness obtained.
** The xSleep() method causes the calling thread to sleep for at
** least the number of microseconds given.  ^The xCurrentTime()
** method returns a Julian Day Number for the current date and time as
** a floating point value.
** ^The xCurrentTimeInt64() method returns, as an integer, the Julian
** Day Number multipled by 86400000 (the number of milliseconds in 
** a 24-hour day).  
** ^SQLite will use the xCurrentTimeInt64() method to get the current
** date and time if that method is available (if iVersion is 2 or 
** greater and the function pointer is not NULL) and will fall back
** to xCurrentTime() if xCurrentTimeInt64() is unavailable.
**
** ^The xSetSystemCall(), xGetSystemCall(), and xNestSystemCall() interfaces
................................................................................
** ^SQLite will never require a scratch buffer that is more than 6
** times the database page size. ^If SQLite needs needs additional
** scratch memory beyond what is provided by this configuration option, then 
** [sqlite3_malloc()] will be used to obtain the memory needed.</dd>
**
** [[SQLITE_CONFIG_PAGECACHE]] <dt>SQLITE_CONFIG_PAGECACHE</dt>
** <dd> ^This option specifies a static memory buffer that SQLite can use for
** the database page cache with the default page cache implemenation.  
** This configuration should not be used if an application-define page
** cache implementation is loaded using the SQLITE_CONFIG_PCACHE option.
** There are three arguments to this option: A pointer to 8-byte aligned
** memory, the size of each page buffer (sz), and the number of pages (N).
** The sz argument should be the size of the largest database page
** (a power of two between 512 and 32768) plus a little extra for each
** page header.  ^The page header size is 20 to 40 bytes depending on
................................................................................
** automatically deleted as soon as the database connection is closed.
**
** [[URI filenames in sqlite3_open()]] <h3>URI Filenames</h3>
**
** ^If [URI filename] interpretation is enabled, and the filename argument
** begins with "file:", then the filename is interpreted as a URI. ^URI
** filename interpretation is enabled if the [SQLITE_OPEN_URI] flag is
** is set in the fourth argument to sqlite3_open_v2(), or if it has
** been enabled globally using the [SQLITE_CONFIG_URI] option with the
** [sqlite3_config()] method or by the [SQLITE_USE_URI] compile-time option.
** As of SQLite version 3.7.7, URI filename interpretation is turned off
** by default, but future releases of SQLite might enable URI filename
** intepretation by default.  See "[URI filenames]" for additional
** information.
**
** URI filenames are parsed according to RFC 3986. ^If the URI contains an
** authority, then it must be either an empty string or the string 
** "localhost". ^If the authority is not an empty string or "localhost", an 
** error is returned to the caller. ^The fragment component of a URI, if 
** present, is ignored.
................................................................................
** [SQLITE_DONE], [SQLITE_ROW], [SQLITE_ERROR], or [SQLITE_MISUSE].
** ^With the "v2" interface, any of the other [result codes] or
** [extended result codes] might be returned as well.
**
** ^[SQLITE_BUSY] means that the database engine was unable to acquire the
** database locks it needs to do its job.  ^If the statement is a [COMMIT]
** or occurs outside of an explicit transaction, then you can retry the
** statement.  If the statement is not a [COMMIT] and occurs within a
** explicit transaction then you should rollback the transaction before
** continuing.
**
** ^[SQLITE_DONE] means that the statement has finished executing
** successfully.  sqlite3_step() should not be called again on this virtual
** machine without first calling [sqlite3_reset()] to reset the virtual
** machine back to its initial state.
................................................................................
SQLITE_API int sqlite3_column_type(sqlite3_stmt*, int iCol);
SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol);

/*
** CAPI3REF: Destroy A Prepared Statement Object
**
** ^The sqlite3_finalize() function is called to delete a [prepared statement].
** ^If the most recent evaluation of the statement encountered no errors or
** or if the statement is never been evaluated, then sqlite3_finalize() returns
** SQLITE_OK.  ^If the most recent evaluation of statement S failed, then
** sqlite3_finalize(S) returns the appropriate [error code] or
** [extended error code].
**
** ^The sqlite3_finalize(S) routine can be called at any point during
** the life cycle of [prepared statement] S:
................................................................................
** ^The implementation is not required to provided versions of these
** routines that actually work. If the implementation does not provide working
** versions of these routines, it should at least provide stubs that always
** return true so that one does not get spurious assertion failures.
**
** ^If the argument to sqlite3_mutex_held() is a NULL pointer then
** the routine should return 1.   This seems counter-intuitive since
** clearly the mutex cannot be held if it does not exist.  But the
** the reason the mutex does not exist is because the build is not
** using mutexes.  And we do not want the assert() containing the
** call to sqlite3_mutex_held() to fail, so a non-zero return is
** the appropriate thing to do.  ^The sqlite3_mutex_notheld()
** interface should also return 1 when given a NULL pointer.
*/
#ifndef NDEBUG
................................................................................
#define SQLITE_TESTCTRL_ASSERT                  12
#define SQLITE_TESTCTRL_ALWAYS                  13
#define SQLITE_TESTCTRL_RESERVE                 14
#define SQLITE_TESTCTRL_OPTIMIZATIONS           15
#define SQLITE_TESTCTRL_ISKEYWORD               16
#define SQLITE_TESTCTRL_PGHDRSZ                 17
#define SQLITE_TESTCTRL_SCRATCHMALLOC           18

#define SQLITE_TESTCTRL_LAST                    18

/*
** CAPI3REF: SQLite Runtime Status
**
** ^This interface is used to retrieve runtime status information
** about the performance of SQLite, and optionally to reset various
** highwater marks.  ^The first argument is an integer code for
................................................................................
** stored in the cache, both pinned and unpinned.
** 
** [[the xFetch() page cache methods]]
** The xFetch() method locates a page in the cache and returns a pointer to 
** the page, or a NULL pointer.
** A "page", in this context, means a buffer of szPage bytes aligned at an
** 8-byte boundary. The page to be fetched is determined by the key. ^The
** mimimum key value is 1.  After it has been retrieved using xFetch, the page 
** is considered to be "pinned".
**
** If the requested page is already in the page cache, then the page cache
** implementation must return a pointer to the page buffer with its content
** intact.  If the requested page is not already in the cache, then the
** cache implementation should use the value of the createFlag
** parameter to help it determined what action to take:
................................................................................
#define SQLITE_QueryFlattener 0x01        /* Disable query flattening */
#define SQLITE_ColumnCache    0x02        /* Disable the column cache */
#define SQLITE_IndexSort      0x04        /* Disable indexes for sorting */
#define SQLITE_IndexSearch    0x08        /* Disable indexes for searching */
#define SQLITE_IndexCover     0x10        /* Disable index covering table */
#define SQLITE_GroupByOrder   0x20        /* Disable GROUPBY cover of ORDERBY */
#define SQLITE_FactorOutConst 0x40        /* Disable factoring out constants */

#define SQLITE_OptMask        0xff        /* Mask of all disablable opts */

/*
** Possible values for the sqlite.magic field.
** The numbers are obtained at random and have no special meaning, other
** than being distinct from one another.
*/
................................................................................
  int isMutexInit;                  /* True after mutexes are initialized */
  int isMallocInit;                 /* True after malloc is initialized */
  int isPCacheInit;                 /* True after malloc is initialized */
  sqlite3_mutex *pInitMutex;        /* Mutex used by sqlite3_initialize() */
  int nRefInitMutex;                /* Number of users of pInitMutex */
  void (*xLog)(void*,int,const char*); /* Function for logging */
  void *pLogArg;                       /* First argument to xLog() */

};

/*
** Context pointer passed down through the tree-walk.
*/
struct Walker {
  int (*xExprCallback)(Walker*, Expr*);     /* Callback for expressions */
................................................................................
   0,                         /* isMutexInit */
   0,                         /* isMallocInit */
   0,                         /* isPCacheInit */
   0,                         /* pInitMutex */
   0,                         /* nRefInitMutex */
   0,                         /* xLog */
   0,                         /* pLogArg */

};


/*
** Hash table for global functions - functions common to all
** database connections.  After initialization, this table is
** read-only.
................................................................................
**      Willmann-Bell, Inc
**      Richmond, Virginia (USA)
*/
#include <time.h>

#ifndef SQLITE_OMIT_DATETIME_FUNCS

/*
** On recent Windows platforms, the localtime_s() function is available
** as part of the "Secure CRT". It is essentially equivalent to 
** localtime_r() available under most POSIX platforms, except that the 
** order of the parameters is reversed.
**
** See http://msdn.microsoft.com/en-us/library/a442x3ye(VS.80).aspx.
**
** If the user has not indicated to use localtime_r() or localtime_s()
** already, check for an MSVC build environment that provides 
** localtime_s().
*/
#if !defined(HAVE_LOCALTIME_R) && !defined(HAVE_LOCALTIME_S) && \
     defined(_MSC_VER) && defined(_CRT_INSECURE_DEPRECATE)
#define HAVE_LOCALTIME_S 1
#endif

/*
** A structure for holding a single date and time.
*/
typedef struct DateTime DateTime;
struct DateTime {
  sqlite3_int64 iJD; /* The julian day number times 86400000 */
................................................................................
** Clear the YMD and HMS and the TZ
*/
static void clearYMD_HMS_TZ(DateTime *p){
  p->validYMD = 0;
  p->validHMS = 0;
  p->validTZ = 0;
}


















#ifndef SQLITE_OMIT_LOCALTIME
/*









































** Compute the difference (in milliseconds)
** between localtime and UTC (a.k.a. GMT)
** for the time value p where p is in UTC.




*/
static sqlite3_int64 localtimeOffset(DateTime *p){




  DateTime x, y;
  time_t t;





  x = *p;
  computeYMD_HMS(&x);
  if( x.Y<1971 || x.Y>=2038 ){
    x.Y = 2000;
    x.M = 1;
    x.D = 1;
    x.h = 0;
................................................................................
    int s = (int)(x.s + 0.5);
    x.s = s;
  }
  x.tz = 0;
  x.validJD = 0;
  computeJD(&x);
  t = (time_t)(x.iJD/1000 - 21086676*(i64)10000);
#ifdef HAVE_LOCALTIME_R
  {
    struct tm sLocal;
    localtime_r(&t, &sLocal);
    y.Y = sLocal.tm_year + 1900;
    y.M = sLocal.tm_mon + 1;
    y.D = sLocal.tm_mday;
    y.h = sLocal.tm_hour;
    y.m = sLocal.tm_min;
    y.s = sLocal.tm_sec;



  }
#elif defined(HAVE_LOCALTIME_S) && HAVE_LOCALTIME_S
  {
    struct tm sLocal;
    localtime_s(&sLocal, &t);
    y.Y = sLocal.tm_year + 1900;
    y.M = sLocal.tm_mon + 1;
    y.D = sLocal.tm_mday;
    y.h = sLocal.tm_hour;
    y.m = sLocal.tm_min;
    y.s = sLocal.tm_sec;
  }
#else
  {
    struct tm *pTm;
    sqlite3_mutex_enter(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER));
    pTm = localtime(&t);
    y.Y = pTm->tm_year + 1900;
    y.M = pTm->tm_mon + 1;
    y.D = pTm->tm_mday;
    y.h = pTm->tm_hour;
    y.m = pTm->tm_min;
    y.s = pTm->tm_sec;
    sqlite3_mutex_leave(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER));
  }
#endif
  y.validYMD = 1;
  y.validHMS = 1;
  y.validJD = 0;
  y.validTZ = 0;
  computeJD(&y);

  return y.iJD - x.iJD;
}
#endif /* SQLITE_OMIT_LOCALTIME */

/*
** Process a modifier to a date-time stamp.  The modifiers are
** as follows:
................................................................................
**     start of week
**     start of day
**     weekday N
**     unixepoch
**     localtime
**     utc
**
** Return 0 on success and 1 if there is any kind of error.



*/
static int parseModifier(const char *zMod, DateTime *p){
  int rc = 1;
  int n;
  double r;
  char *z, zBuf[30];
  z = zBuf;
  for(n=0; n<ArraySize(zBuf)-1 && zMod[n]; n++){
    z[n] = (char)sqlite3UpperToLower[(u8)zMod[n]];
................................................................................
      /*    localtime
      **
      ** Assuming the current time value is UTC (a.k.a. GMT), shift it to
      ** show local time.
      */
      if( strcmp(z, "localtime")==0 ){
        computeJD(p);
        p->iJD += localtimeOffset(p);
        clearYMD_HMS_TZ(p);
        rc = 0;
      }
      break;
    }
#endif
    case 'u': {
      /*
      **    unixepoch
................................................................................
        clearYMD_HMS_TZ(p);
        rc = 0;
      }
#ifndef SQLITE_OMIT_LOCALTIME
      else if( strcmp(z, "utc")==0 ){
        sqlite3_int64 c1;
        computeJD(p);
        c1 = localtimeOffset(p);

        p->iJD -= c1;
        clearYMD_HMS_TZ(p);
        p->iJD += c1 - localtimeOffset(p);
        rc = 0;

      }
#endif
      break;
    }
    case 'w': {
      /*
      **    weekday N
................................................................................
  }else{
    z = sqlite3_value_text(argv[0]);
    if( !z || parseDateOrTime(context, (char*)z, p) ){
      return 1;
    }
  }
  for(i=1; i<argc; i++){
    if( (z = sqlite3_value_text(argv[i]))==0 || parseModifier((char*)z, p) ){
      return 1;
    }
  }
  return 0;
}


/*
** The following routines implement the various date and time functions
................................................................................
# endif
#endif /* SQLITE_ENABLE_LOCKING_STYLE */

#if defined(__APPLE__) || (SQLITE_ENABLE_LOCKING_STYLE && !OS_VXWORKS)
# include <sys/mount.h>
#endif





/*
** Allowed values of unixFile.fsFlags
*/
#define SQLITE_FSFLAGS_IS_MSDOS     0x1

/*
** If we are to be thread-safe, include the pthreads header and define
................................................................................


  /* If we have any lock, then the lock file already exists.  All we have
  ** to do is adjust our internal record of the lock level.
  */
  if( pFile->eFileLock > NO_LOCK ){
    pFile->eFileLock = eFileLock;
#if !OS_VXWORKS
    /* Always update the timestamp on the old file */



    utimes(zLockFile, NULL);
#endif
    return SQLITE_OK;
  }
  
  /* grab an exclusive lock */
  fd = robust_open(zLockFile,O_RDONLY|O_CREAT|O_EXCL,0600);
................................................................................
*/
static void unixShmPurge(unixFile *pFd){
  unixShmNode *p = pFd->pInode->pShmNode;
  assert( unixMutexHeld() );
  if( p && p->nRef==0 ){
    int i;
    assert( p->pInode==pFd->pInode );
    if( p->mutex ) sqlite3_mutex_free(p->mutex);
    for(i=0; i<p->nRegion; i++){
      if( p->h>=0 ){
        munmap(p->apRegion[i], p->szRegion);
      }else{
        sqlite3_free(p->apRegion[i]);
      }
    }
................................................................................
    if( nRem>0 ){
      pFile->lastErrno = GetLastError();
      rc = 1;
    }
  }

  if( rc ){
    if( pFile->lastErrno==ERROR_HANDLE_DISK_FULL ){

      return SQLITE_FULL;
    }
    return winLogError(SQLITE_IOERR_WRITE, "winWrite", pFile->zPath);
  }
  return SQLITE_OK;
}

................................................................................
    ** caller. Set the error code in the database handle to the same value.
    */ 
    rc = db->errCode = p->rc;
  }
  return (rc&db->errMask);
}









/*
** This is the top-level implementation of sqlite3_step().  Call
** sqlite3Step() to do most of the work.  If a schema error occurs,
** call sqlite3Reprepare() and try again.
*/
SQLITE_API int sqlite3_step(sqlite3_stmt *pStmt){
  int rc = SQLITE_OK;      /* Result from sqlite3Step() */
................................................................................

  if( vdbeSafetyNotNull(v) ){
    return SQLITE_MISUSE_BKPT;
  }
  db = v->db;
  sqlite3_mutex_enter(db->mutex);
  while( (rc = sqlite3Step(v))==SQLITE_SCHEMA
         && cnt++ < 5
         && (rc2 = rc = sqlite3Reprepare(v))==SQLITE_OK ){
    sqlite3_reset(pStmt);
    v->expired = 0;
  }
  if( rc2!=SQLITE_OK && ALWAYS(v->isPrepareV2) && ALWAYS(db->pErr) ){
    /* This case occurs after failing to recompile an sql statement. 
    ** The error message from the SQL compiler has already been loaded 
................................................................................
  REGISTER_TRACE(pOp->p1, pIn1);
  pc = u.aa.pcDest;
  break;
}

/* Opcode:  HaltIfNull  P1 P2 P3 P4 *
**
** Check the value in register P3.  If is is NULL then Halt using
** parameter P1, P2, and P4 as if this were a Halt instruction.  If the
** value in register P3 is not NULL, then this routine is a no-op.
*/
case OP_HaltIfNull: {      /* in3 */
  pIn3 = &aMem[pOp->p3];
  if( (pIn3->flags & MEM_Null)==0 ) break;
  /* Fall through into OP_Halt */
................................................................................
** This works just like the Lt opcode except that the jump is taken if
** the operands in registers P1 and P3 are not equal.  See the Lt opcode for
** additional information.
**
** If SQLITE_NULLEQ is set in P5 then the result of comparison is always either
** true or false and is never NULL.  If both operands are NULL then the result
** of comparison is false.  If either operand is NULL then the result is true.
** If neither operand is NULL the the result is the same as it would be if
** the SQLITE_NULLEQ flag were omitted from P5.
*/
/* Opcode: Eq P1 P2 P3 P4 P5
**
** This works just like the Lt opcode except that the jump is taken if
** the operands in registers P1 and P3 are equal.
** See the Lt opcode for additional information.
**
** If SQLITE_NULLEQ is set in P5 then the result of comparison is always either
** true or false and is never NULL.  If both operands are NULL then the result
** of comparison is true.  If either operand is NULL then the result is false.
** If neither operand is NULL the the result is the same as it would be if
** the SQLITE_NULLEQ flag were omitted from P5.
*/
/* Opcode: Le P1 P2 P3 P4 P5
**
** This works just like the Lt opcode except that the jump is taken if
** the content of register P3 is less than or equal to the content of
** register P1.  See the Lt opcode for additional information.
................................................................................
    sqlite3VdbeMemSetInt64(pOut, ~sqlite3VdbeIntValue(pIn1));
  }
  break;
}

/* Opcode: If P1 P2 P3 * *
**
** Jump to P2 if the value in register P1 is true.  The value is
** is considered true if it is numeric and non-zero.  If the value
** in P1 is NULL then take the jump if P3 is true.
*/
/* Opcode: IfNot P1 P2 P3 * *
**
** Jump to P2 if the value in register P1 is False.  The value is
** is considered true if it has a numeric value of zero.  If the value
** in P1 is NULL then take the jump if P3 is true.
*/
case OP_If:                 /* jump, in1 */
case OP_IfNot: {            /* jump, in1 */
#if 0  /* local variables moved into u.al */
  int c;
................................................................................
    }
  }
  break;
}

/* Opcode: NotExists P1 P2 P3 * *
**
** Use the content of register P3 as a integer key.  If a record 
** with that key does not exist in table of P1, then jump to P2. 
** If the record does exist, then fall through.  The cursor is left 
** pointing to the record if it exists.
**
** The difference between this operation and NotFound is that this
** operation assumes the key is an integer and that P1 is a table whereas
** NotFound assumes key is a blob constructed from MakeRecord and
................................................................................
** The record number is not previously used as a key in the database
** table that cursor P1 points to.  The new record number is written
** written to register P2.
**
** If P3>0 then P3 is a register in the root frame of this VDBE that holds 
** the largest previously generated record number. No new record numbers are
** allowed to be less than this value. When this value reaches its maximum, 
** a SQLITE_FULL error is generated. The P3 register is updated with the '
** generated record number. This P3 mechanism is used to help implement the
** AUTOINCREMENT feature.
*/
case OP_NewRowid: {           /* out2-prerelease */
#if 0  /* local variables moved into u.be */
  i64 v;                 /* The new rowid */
  VdbeCursor *pC;        /* Cursor of table to get the new rowid */
................................................................................
  }
  u.bm.pC->rowidIsValid = 0;
  break;
}

/* Opcode: IdxInsert P1 P2 P3 * P5
**
** Register P2 holds a SQL index key made using the
** MakeRecord instructions.  This opcode writes that key
** into the index P1.  Data for the entry is nil.
**
** P3 is a flag that provides a hint to the b-tree layer that this
** insert is likely to be an append.
**
** This instruction only works for indices.  The equivalent instruction
................................................................................
      sqlite3VdbeAddOp2(v, OP_SCopy, regBase+nCol, regBase+j);
    }else{
      sqlite3VdbeAddOp3(v, OP_Column, iCur, idx, regBase+j);
      sqlite3ColumnDefault(v, pTab, idx, -1);
    }
  }
  if( doMakeRec ){






    sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase, nCol+1, regOut);
    sqlite3VdbeChangeP4(v, -1, sqlite3IndexAffinityStr(v, pIdx), P4_TRANSIENT);
  }
  sqlite3ReleaseTempRange(pParse, regBase, nCol+1);
  return regBase;
}

/************** End of delete.c **********************************************/
/************** Begin file func.c ********************************************/
................................................................................
      ppNew = va_arg(ap, void**);
      pFree = va_arg(ap, void*);
      if( sz ) *ppNew = sqlite3ScratchMalloc(sz);
      sqlite3ScratchFree(pFree);
      break;
    }












  }
  va_end(ap);
#endif /* SQLITE_OMIT_BUILTIN_TEST */
  return rc;
}

/*
................................................................................
** older data.
**
** TODO(shess) Provide a VACUUM type operation to clear out all
** deletions and duplications.  This would basically be a forced merge
** into a single segment.
*/

#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3)

#if defined(SQLITE_ENABLE_FTS3) && !defined(SQLITE_CORE)
# define SQLITE_CORE 1
#endif

/************** Include fts3Int.h in the middle of fts3.c ********************/
/************** Begin file fts3Int.h *****************************************/
/*
** 2009 Nov 12
**
** The author disclaims copyright to this source code.  In place of
** a legal notice, here is a blessing:
................................................................................
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
******************************************************************************
**
*/

#ifndef _FTSINT_H
#define _FTSINT_H

#if !defined(NDEBUG) && !defined(SQLITE_DEBUG) 
# define NDEBUG 1
#endif











/************** Include fts3_tokenizer.h in the middle of fts3Int.h **********/
/************** Begin file fts3_tokenizer.h **********************************/
/*
** 2006 July 10
**
** The author disclaims copyright to this source code.
**
................................................................................
  sqlite3_int64 iPrevId;          /* Previous id read from aDoclist */
  char *pNextId;                  /* Pointer into the body of aDoclist */
  char *aDoclist;                 /* List of docids for full-text queries */
  int nDoclist;                   /* Size of buffer at aDoclist */
  u8 bDesc;                       /* True to sort in descending order */
  int eEvalmode;                  /* An FTS3_EVAL_XX constant */
  int nRowAvg;                    /* Average size of database rows, in pages */
  int nDoc;                       /* Documents in table */

  int isMatchinfoNeeded;          /* True when aMatchinfo[] needs filling in */
  u32 *aMatchinfo;                /* Information about most recent match */
  int nMatchinfo;                 /* Number of elements in aMatchinfo[] */
  char *zMatchinfo;               /* Matchinfo specification */
};

................................................................................
  char *z;                        /* Text of the token */
  int n;                          /* Number of bytes in buffer z */
  int isPrefix;                   /* True if token ends with a "*" character */

  /* Variables above this point are populated when the expression is
  ** parsed (by code in fts3_expr.c). Below this point the variables are
  ** used when evaluating the expression. */
  int bFulltext;                  /* True if full-text index was used */
  Fts3DeferredToken *pDeferred;   /* Deferred token object for this token */
  Fts3MultiSegReader *pSegcsr;    /* Segment-reader for this token */
};

struct Fts3Phrase {
  /* Cache of doclist for this phrase. */
  Fts3Doclist doclist;
  int bIncr;                 /* True if doclist is loaded incrementally */


  /* Variables below this point are populated by fts3_expr.c when parsing 
  ** a MATCH expression. Everything above is part of the evaluation phase. 
  */
  int nToken;                /* Number of tokens in the phrase */
  int iColumn;               /* Index of column this phrase must match */
  Fts3PhraseToken aToken[1]; /* One entry for each token in the phrase */
................................................................................
  int nSegment;                   /* Size of apSegment array */
  int nAdvance;                   /* How many seg-readers to advance */
  Fts3SegFilter *pFilter;         /* Pointer to filter object */
  char *aBuffer;                  /* Buffer to merge doclists in */
  int nBuffer;                    /* Allocated size of aBuffer[] in bytes */

  int iColFilter;                 /* If >=0, filter for this column */


  /* Used by fts3.c only. */
  int nCost;                      /* Cost of running iterator */
  int bLookup;                    /* True if a lookup of a single entry. */

  /* Output values. Valid only after Fts3SegReaderStep() returns SQLITE_ROW. */
  char *zTerm;                    /* Pointer to term buffer */
................................................................................

SQLITE_PRIVATE int sqlite3Fts3MsrIncrStart(
    Fts3Table*, Fts3MultiSegReader*, int, const char*, int);
SQLITE_PRIVATE int sqlite3Fts3MsrIncrNext(
    Fts3Table *, Fts3MultiSegReader *, sqlite3_int64 *, char **, int *);
SQLITE_PRIVATE char *sqlite3Fts3EvalPhrasePoslist(Fts3Cursor *, Fts3Expr *, int iCol); 
SQLITE_PRIVATE int sqlite3Fts3MsrOvfl(Fts3Cursor *, Fts3MultiSegReader *, int *);


SQLITE_PRIVATE int sqlite3Fts3DeferredTokenList(Fts3DeferredToken *, char **, int *);


#endif /* _FTSINT_H */

/************** End of fts3Int.h *********************************************/
/************** Continuing where we left off in fts3.c ***********************/







#ifndef SQLITE_CORE 
  SQLITE_EXTENSION_INIT1
#endif

/* 
................................................................................
      rc = SQLITE_NOMEM;
    }else{
      rc = sqlite3_prepare(p->db, zSql, -1, &pStmt, 0);
      if( rc==SQLITE_OK ){
        sqlite3_step(pStmt);
        p->nPgsz = sqlite3_column_int(pStmt, 0);
        rc = sqlite3_finalize(pStmt);



      }
    }
    assert( p->nPgsz>0 || rc!=SQLITE_OK );
    sqlite3_free(zSql);
    *pRc = rc;
  }
}
................................................................................
  p->zDb = zCsr;
  memcpy(zCsr, argv[1], nDb);
  zCsr += nDb;

  /* Fill in the azColumn array */
  for(iCol=0; iCol<nCol; iCol++){
    char *z; 
    int n;
    z = (char *)sqlite3Fts3NextToken(aCol[iCol], &n);
    memcpy(zCsr, z, n);
    zCsr[n] = '\0';
    sqlite3Fts3Dequote(zCsr);
    p->azColumn[iCol] = zCsr;
    zCsr += n+1;
    assert( zCsr <= &((char *)p)[nByte] );
................................................................................
  return rc;
}

/*
** Implementation of xBegin() method. This is a no-op.
*/
static int fts3BeginMethod(sqlite3_vtab *pVtab){
  UNUSED_PARAMETER(pVtab);
  TESTONLY( Fts3Table *p = (Fts3Table*)pVtab );

  assert( p->pSegments==0 );
  assert( p->nPendingData==0 );
  assert( p->inTransaction!=1 );
  TESTONLY( p->inTransaction = 1 );
  TESTONLY( p->mxSavepoint = -1; );
  return SQLITE_OK;
}
................................................................................

/*
** Implementation of xCommit() method. This is a no-op. The contents of
** the pending-terms hash-table have already been flushed into the database
** by fts3SyncMethod().
*/
static int fts3CommitMethod(sqlite3_vtab *pVtab){
  UNUSED_PARAMETER(pVtab);
  TESTONLY( Fts3Table *p = (Fts3Table*)pVtab );

  assert( p->nPendingData==0 );
  assert( p->inTransaction!=0 );
  assert( p->pSegments==0 );
  TESTONLY( p->inTransaction = 0 );
  TESTONLY( p->mxSavepoint = -1; );
  return SQLITE_OK;
}
................................................................................
            pToken->z, pToken->n, pToken->isPrefix, &pToken->pSegcsr
        );
        if( rc!=SQLITE_OK ){
          *pRc = rc;
          return;
        }
      }


    }else{
      *pnOr += (pExpr->eType==FTSQUERY_OR);
      fts3EvalAllocateReaders(pCsr, pExpr->pLeft, pnToken, pnOr, pRc);
      fts3EvalAllocateReaders(pCsr, pExpr->pRight, pnToken, pnOr, pRc);
    }
  }
}























































static int fts3EvalPhraseLoad(
  Fts3Cursor *pCsr, 
  Fts3Phrase *p
){
  Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab;
  int iToken;
  int rc = SQLITE_OK;

  char *aDoclist = 0;
  int nDoclist = 0;
  int iPrev = -1;

  for(iToken=0; rc==SQLITE_OK && iToken<p->nToken; iToken++){
    Fts3PhraseToken *pToken = &p->aToken[iToken];
    assert( pToken->pSegcsr || pToken->pDeferred );


    if( pToken->pDeferred==0 ){
      int nThis = 0;
      char *pThis = 0;
      rc = fts3TermSelect(pTab, pToken, p->iColumn, 1, &nThis, &pThis);
      if( rc==SQLITE_OK ){
        if( pThis==0 ){
          sqlite3_free(aDoclist);
          aDoclist = 0;
          nDoclist = 0;
          break;
        }else if( aDoclist==0 ){
          aDoclist = pThis;
          nDoclist = nThis;
        }else{
          assert( iPrev>=0 );
          fts3DoclistPhraseMerge(pTab->bDescIdx,
              iToken-iPrev, aDoclist, nDoclist, pThis, &nThis
          );
          sqlite3_free(aDoclist);
          aDoclist = pThis;
          nDoclist = nThis;
        }
        iPrev = iToken;
      }

    }
  }

  if( rc==SQLITE_OK ){
    p->doclist.aAll = aDoclist;
    p->doclist.nAll = nDoclist;
  }else{
    sqlite3_free(aDoclist);
  }
  return rc;
}

static int fts3EvalDeferredPhrase(Fts3Cursor *pCsr, Fts3Phrase *pPhrase){
  int iToken;
  int rc = SQLITE_OK;

  int nMaxUndeferred = -1;
  char *aPoslist = 0;
  int nPoslist = 0;
  int iPrev = -1;

  assert( pPhrase->doclist.bFreeList==0 );

  for(iToken=0; rc==SQLITE_OK && iToken<pPhrase->nToken; iToken++){
................................................................................
          sqlite3_free(aPoslist);
          pPhrase->doclist.pList = 0;
          pPhrase->doclist.nList = 0;
          return SQLITE_OK;
        }
      }
      iPrev = iToken;
    }else{
      nMaxUndeferred = iToken;
    }
  }

  if( iPrev>=0 ){
    if( nMaxUndeferred<0 ){
      pPhrase->doclist.pList = aPoslist;
      pPhrase->doclist.nList = nPoslist;
................................................................................
** used with fts3EvalPhraseNext() to iterate through the matching docids.
*/
static int fts3EvalPhraseStart(Fts3Cursor *pCsr, int bOptOk, Fts3Phrase *p){
  int rc;
  Fts3PhraseToken *pFirst = &p->aToken[0];
  Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab;

  assert( p->doclist.aAll==0 );
  if( pCsr->bDesc==pTab->bDescIdx && bOptOk==1 && p->nToken==1 



   && pFirst->pSegcsr && pFirst->pSegcsr->bLookup 
  ){
    /* Use the incremental approach. */
    int iCol = (p->iColumn >= pTab->nColumn ? -1 : p->iColumn);
    rc = sqlite3Fts3MsrIncrStart(
        pTab, pFirst->pSegcsr, iCol, pFirst->z, pFirst->n);
    p->bIncr = 1;

................................................................................
      ** edited in place by fts3EvalNearTrim2(), then pIter may not actually
      ** point to the start of the next docid value. The following line deals
      ** with this case by advancing pIter past the zero-padding added by
      ** fts3EvalNearTrim2().  */
      while( pIter<pEnd && *pIter==0 ) pIter++;

      pDL->pNextDocid = pIter;
      assert( *pIter || pIter>=&pDL->aAll[pDL->nAll] );
      *pbEof = 0;
    }
  }

  return rc;
}

................................................................................
      fts3EvalStartReaders(pCsr, pExpr->pLeft, bOptOk, pRc);
      fts3EvalStartReaders(pCsr, pExpr->pRight, bOptOk, pRc);
      pExpr->bDeferred = (pExpr->pLeft->bDeferred && pExpr->pRight->bDeferred);
    }
  }
}


typedef struct Fts3TokenAndCost Fts3TokenAndCost;
struct Fts3TokenAndCost {


  Fts3PhraseToken *pToken;
  Fts3Expr *pRoot;
  int nOvfl;
  int iCol;

};

static void fts3EvalTokenCosts(
  Fts3Cursor *pCsr, 
  Fts3Expr *pRoot, 
  Fts3Expr *pExpr, 
  Fts3TokenAndCost **ppTC,
................................................................................
){
  if( *pRc==SQLITE_OK && pExpr ){
    if( pExpr->eType==FTSQUERY_PHRASE ){
      Fts3Phrase *pPhrase = pExpr->pPhrase;
      int i;
      for(i=0; *pRc==SQLITE_OK && i<pPhrase->nToken; i++){
        Fts3TokenAndCost *pTC = (*ppTC)++;


        pTC->pRoot = pRoot;
        pTC->pToken = &pPhrase->aToken[i];
        pTC->iCol = pPhrase->iColumn;
        *pRc = sqlite3Fts3MsrOvfl(pCsr, pTC->pToken->pSegcsr, &pTC->nOvfl);
      }
    }else if( pExpr->eType!=FTSQUERY_NOT ){
      if( pExpr->eType==FTSQUERY_OR ){
................................................................................
    assert( pTC );

    /* At this point pTC points to the cheapest remaining token. */
    if( ii==0 ){
      if( pTC->nOvfl ){
        nDocEst = (pTC->nOvfl * pTab->nPgsz + pTab->nPgsz) / 10;
      }else{
        /* TODO: Fix this so that the doclist need not be read twice. */
        Fts3PhraseToken *pToken = pTC->pToken;
        int nList = 0;
        char *pList = 0;
        rc = fts3TermSelect(pTab, pToken, pTC->iCol, 1, &nList, &pList);
        if( rc==SQLITE_OK ){
          nDocEst = fts3DoclistCountDocids(1, pList, nList);
        }
        sqlite3_free(pList);
        if( rc==SQLITE_OK ){
          rc = sqlite3Fts3TermSegReaderCursor(pCsr, 
              pToken->z, pToken->n, pToken->isPrefix, &pToken->pSegcsr
          );


        }
      }
    }else{
      if( pTC->nOvfl>=(nDocEst*nDocSize) ){
        Fts3PhraseToken *pToken = pTC->pToken;
        rc = sqlite3Fts3DeferToken(pCsr, pToken, pTC->iCol);
        fts3SegReaderCursorFree(pToken->pSegcsr);
................................................................................
){
  if( pExpr && *pRc==SQLITE_OK ){
    Fts3Phrase *pPhrase = pExpr->pPhrase;

    if( pPhrase ){
      fts3EvalZeroPoslist(pPhrase);
      if( pPhrase->bIncr ){
        sqlite3Fts3EvalPhraseCleanup(pPhrase);
        memset(&pPhrase->doclist, 0, sizeof(Fts3Doclist));
        *pRc = sqlite3Fts3EvalStart(pCsr, pExpr, 0);
      }else{


        pPhrase->doclist.pNextDocid = 0;
        pPhrase->doclist.iDocid = 0;
      }
    }

    pExpr->iDocid = 0;
    pExpr->bEof = 0;
    pExpr->bStart = 0;

    fts3EvalRestart(pCsr, pExpr->pLeft, pRc);
................................................................................
  Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab;
  int rc = SQLITE_OK;
  int iCol;

  if( pExpr->bDeferred && pExpr->pParent->eType!=FTSQUERY_NEAR ){
    assert( pCsr->nDoc>0 );
    for(iCol=0; iCol<pTab->nColumn; iCol++){
      aiOut[iCol*3 + 1] = pCsr->nDoc;
      aiOut[iCol*3 + 2] = pCsr->nDoc;
    }
  }else{
    rc = fts3EvalGatherStats(pCsr, pExpr);
    if( rc==SQLITE_OK ){
      assert( pExpr->aMI );
      for(iCol=0; iCol<pTab->nColumn; iCol++){
        aiOut[iCol*3 + 1] = pExpr->aMI[iCol*3 + 1];
................................................................................
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
******************************************************************************
**
*/

#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3)


typedef struct Fts3auxTable Fts3auxTable;
typedef struct Fts3auxCursor Fts3auxCursor;

struct Fts3auxTable {
................................................................................
**     * The FTS3 module is being built into the core of
**       SQLite (in which case SQLITE_ENABLE_FTS3 is defined).
*/
#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3)




/*
** Class derived from sqlite3_tokenizer
*/
typedef struct porter_tokenizer {
  sqlite3_tokenizer base;      /* Base class */
} porter_tokenizer;

................................................................................
**
**     * The FTS3 module is being built as an extension
**       (in which case SQLITE_CORE is not defined), or
**
**     * The FTS3 module is being built into the core of
**       SQLite (in which case SQLITE_ENABLE_FTS3 is defined).
*/
#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3)

#ifndef SQLITE_CORE
  SQLITE_EXTENSION_INIT1
#endif




/*
** Implementation of the SQL scalar function for accessing the underlying 
** hash table. This function may be called as follows:
**
**   SELECT <function-name>(<key-name>);
................................................................................
  Fts3Hash *pHash,                /* Tokenizer hash table */
  const char *zArg,               /* Tokenizer name */
  sqlite3_tokenizer **ppTok,      /* OUT: Tokenizer (if applicable) */
  char **pzErr                    /* OUT: Set to malloced error message */
){
  int rc;
  char *z = (char *)zArg;
  int n;
  char *zCopy;
  char *zEnd;                     /* Pointer to nul-term of zCopy */
  sqlite3_tokenizer_module *m;

  zCopy = sqlite3_mprintf("%s", zArg);
  if( !zCopy ) return SQLITE_NOMEM;
  zEnd = &zCopy[strlen(zCopy)];
................................................................................
**     * The FTS3 module is being built as an extension
**       (in which case SQLITE_CORE is not defined), or
**
**     * The FTS3 module is being built into the core of
**       SQLite (in which case SQLITE_ENABLE_FTS3 is defined).
*/
#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3)




typedef struct simple_tokenizer {
  sqlite3_tokenizer base;
  char delim[128];             /* flag ASCII delimiters */
} simple_tokenizer;
................................................................................
    );
    if( bEof ){
      pReader->pOffsetList = 0;
    }else{
      pReader->pOffsetList = p;
    }
  }else{


    /* Pointer p currently points at the first byte of an offset list. The
    ** following block advances it to point one byte past the end of
    ** the same offset list. */
    while( 1 ){
  
      /* The following line of code (and the "p++" below the while() loop) is
................................................................................
    /* If required, populate the output variables with a pointer to and the
    ** size of the previous offset-list.
    */
    if( ppOffsetList ){
      *ppOffsetList = pReader->pOffsetList;
      *pnOffsetList = (int)(p - pReader->pOffsetList - 1);
    }


  
    /* If there are no more entries in the doclist, set pOffsetList to
    ** NULL. Otherwise, set Fts3SegReader.iDocid to the next docid and
    ** Fts3SegReader.pOffsetList to point to the next offset list before
    ** returning.
    */
    if( p>=&pReader->aDoclist[pReader->nDoclist] ){
      pReader->pOffsetList = 0;
    }else{
      rc = fts3SegReaderRequire(pReader, p, FTS3_VARINT_MAX);
      if( rc==SQLITE_OK ){
        sqlite3_int64 iDelta;
        pReader->pOffsetList = p + sqlite3Fts3GetVarint(p, &iDelta);
        if( pTab->bDescIdx ){
................................................................................
  assert( pgsz>0 );

  for(ii=0; rc==SQLITE_OK && ii<pMsr->nSegment; ii++){
    Fts3SegReader *pReader = pMsr->apSegment[ii];
    if( !fts3SegReaderIsPending(pReader) 
     && !fts3SegReaderIsRootOnly(pReader) 
    ){
      int jj;
      for(jj=pReader->iStartBlock; jj<=pReader->iLeafEndBlock; jj++){
        int nBlob;
        rc = sqlite3Fts3ReadBlock(p, jj, 0, &nBlob, 0);
        if( rc!=SQLITE_OK ) break;
        if( (nBlob+35)>pgsz ){
          nOvfl += (nBlob + 34)/pgsz;
        }
................................................................................
    p += sqlite3Fts3GetVarint32(p, &iCurrent);
  }

  *ppList = pList;
  *pnList = nList;
}

SQLITE_PRIVATE int sqlite3Fts3MsrIncrStart(

  Fts3Table *p,                   /* Virtual table handle */






  Fts3MultiSegReader *pCsr,       /* Cursor object */
  int iCol,                       /* Column to match on. */
  const char *zTerm,              /* Term to iterate through a doclist for */
  int nTerm                       /* Number of bytes in zTerm */
){

  int i;
  int nSegment = pCsr->nSegment;
  int (*xCmp)(Fts3SegReader *, Fts3SegReader *) = (
    p->bDescIdx ? fts3SegReaderDoclistCmpRev : fts3SegReaderDoclistCmp
  );


  assert( pCsr->pFilter==0 );
  assert( zTerm && nTerm>0 );


  /* Advance each segment iterator until it points to the term zTerm/nTerm. */
  for(i=0; i<nSegment; i++){
    Fts3SegReader *pSeg = pCsr->apSegment[i];
    do {
      int rc = fts3SegReaderNext(p, pSeg, 1);
      if( rc!=SQLITE_OK ) return rc;
    }while( fts3SegReaderTermCmp(pSeg, zTerm, nTerm)<0 );
  }
  fts3SegReaderSort(pCsr->apSegment, nSegment, nSegment, fts3SegReaderCmp);

  /* Determine how many of the segments actually point to zTerm/nTerm. */
  for(i=0; i<nSegment; i++){
    Fts3SegReader *pSeg = pCsr->apSegment[i];
    if( !pSeg->aNode || fts3SegReaderTermCmp(pSeg, zTerm, nTerm) ){
      break;
    }
  }
  pCsr->nAdvance = i;

  /* Advance each of the segments to point to the first docid. */
  for(i=0; i<pCsr->nAdvance; i++){
    int rc = fts3SegReaderFirstDocid(p, pCsr->apSegment[i]);
    if( rc!=SQLITE_OK ) return rc;
  }
  fts3SegReaderSort(pCsr->apSegment, i, i, xCmp);

  assert( iCol<0 || iCol<p->nColumn );
  pCsr->iColFilter = iCol;


  return SQLITE_OK;
}

SQLITE_PRIVATE int sqlite3Fts3MsrIncrNext(
  Fts3Table *p,                   /* Virtual table handle */
  Fts3MultiSegReader *pMsr,       /* Multi-segment-reader handle */
  sqlite3_int64 *piDocid,         /* OUT: Docid value */
................................................................................
      fts3SegReaderSort(pMsr->apSegment, nMerge, j, xCmp);

      if( pMsr->iColFilter>=0 ){
        fts3ColumnFilter(pMsr->iColFilter, &pList, &nList);
      }

      if( nList>0 ){
        *piDocid = iDocid;





        *paPoslist = pList;


        *pnPoslist = nList;
        break;
      }
    }
    
  }



























  return SQLITE_OK;
}

SQLITE_PRIVATE int sqlite3Fts3SegReaderStart(
  Fts3Table *p,                   /* Virtual table handle */
  Fts3MultiSegReader *pCsr,       /* Cursor object */
  Fts3SegFilter *pFilter          /* Restrictions on range of iteration */
){











  int i;






  /* Initialize the cursor object */
  pCsr->pFilter = pFilter;


  /* If the Fts3SegFilter defines a specific term (or term prefix) to search 
  ** for, then advance each segment iterator until it points to a term of
  ** equal or greater value than the specified term. This prevents many
  ** unnecessary merge/sort operations for the case where single segment
  ** b-tree leaf nodes contain more than one term.
  */




  for(i=0; i<pCsr->nSegment; i++){
    int nTerm = pFilter->nTerm;
    const char *zTerm = pFilter->zTerm;
    Fts3SegReader *pSeg = pCsr->apSegment[i];
    do {








      int rc = fts3SegReaderNext(p, pSeg, 0);
      if( rc!=SQLITE_OK ) return rc;
    }while( zTerm && fts3SegReaderTermCmp(pSeg, zTerm, nTerm)<0 );
  }
  fts3SegReaderSort(
      pCsr->apSegment, pCsr->nSegment, pCsr->nSegment, fts3SegReaderCmp);




  return SQLITE_OK;
}

































SQLITE_PRIVATE int sqlite3Fts3SegReaderStep(
  Fts3Table *p,                   /* Virtual table handle */
  Fts3MultiSegReader *pCsr        /* Cursor object */
){
  int rc = SQLITE_OK;

................................................................................
    }

    assert( isIgnoreEmpty || (isRequirePos && !isColFilter) );
    if( nMerge==1 
     && !isIgnoreEmpty 
     && (p->bDescIdx==0 || fts3SegReaderIsPending(apSegment[0])==0)
    ){
      pCsr->aDoclist = apSegment[0]->aDoclist;




      pCsr->nDoclist = apSegment[0]->nDoclist;

      rc = SQLITE_ROW;
    }else{
      int nDoclist = 0;           /* Size of doclist */
      sqlite3_int64 iPrev = 0;    /* Previous docid stored in doclist */

      /* The current term of the first nMerge entries in the array
      ** of Fts3SegReader objects is the same. The doclists must be merged
      ** and a single term returned with the merged doclist.
................................................................................

      case FTS3_MATCHINFO_NCOL:
        if( bGlobal ) pInfo->aMatchinfo[0] = pInfo->nCol;
        break;
        
      case FTS3_MATCHINFO_NDOC:
        if( bGlobal ){
          sqlite3_int64 nDoc;
          rc = fts3MatchinfoSelectDoctotal(pTab, &pSelect, &nDoc, 0);
          pInfo->aMatchinfo[0] = (u32)nDoc;
        }
        break;

      case FTS3_MATCHINFO_AVGLENGTH: 
        if( bGlobal ){
................................................................................
/*
** Return the N-dimensional volumn of the cell stored in *p.
*/
static float cellArea(Rtree *pRtree, RtreeCell *p){
  float area = 1.0;
  int ii;
  for(ii=0; ii<(pRtree->nDim*2); ii+=2){
    area = area * (DCOORD(p->aCoord[ii+1]) - DCOORD(p->aCoord[ii]));
  }
  return area;
}

/*
** Return the margin length of cell p. The margin length is the sum
** of the objects size in each dimension.
*/
static float cellMargin(Rtree *pRtree, RtreeCell *p){
  float margin = 0.0;
  int ii;
  for(ii=0; ii<(pRtree->nDim*2); ii+=2){
    margin += (DCOORD(p->aCoord[ii+1]) - DCOORD(p->aCoord[ii]));
  }
  return margin;
}

/*
** Store the union of cells p1 and p2 in p1.
*/
................................................................................
        x1 = MAX(DCOORD(p->aCoord[jj]), DCOORD(aCell[ii].aCoord[jj]));
        x2 = MIN(DCOORD(p->aCoord[jj+1]), DCOORD(aCell[ii].aCoord[jj+1]));

        if( x2<x1 ){
          o = 0.0;
          break;
        }else{
          o = o * (x2-x1);
        }
      }
      overlap += o;
    }
  }
  return overlap;
}
................................................................................
  Rtree *pRtree, 
  RtreeCell *p, 
  RtreeCell *pInsert, 
  RtreeCell *aCell, 
  int nCell, 
  int iExclude
){
  float before;
  float after;
  before = cellOverlap(pRtree, p, aCell, nCell, iExclude);
  cellUnion(pRtree, p, pInsert);
  after = cellOverlap(pRtree, p, aCell, nCell, iExclude);
  return after-before;
}
#endif


/*
** This function implements the ChooseLeaf algorithm from Gutman[84].
** ChooseSubTree in r*tree terminology.
................................................................................
  int rc;
  int ii;
  RtreeNode *pNode;
  rc = nodeAcquire(pRtree, 1, 0, &pNode);

  for(ii=0; rc==SQLITE_OK && ii<(pRtree->iDepth-iHeight); ii++){
    int iCell;
    sqlite3_int64 iBest;

    float fMinGrowth;
    float fMinArea;
    float fMinOverlap;

    int nCell = NCELL(pNode);
    RtreeCell cell;
    RtreeNode *pChild;

    RtreeCell *aCell = 0;

................................................................................
  RtreeCell *pBboxLeft,
  RtreeCell *pBboxRight
){
  int **aaSorted;
  int *aSpare;
  int ii;

  int iBestDim;
  int iBestSplit;
  float fBestMargin;

  int nByte = (pRtree->nDim+1)*(sizeof(int*)+nCell*sizeof(int));

  aaSorted = (int **)sqlite3_malloc(nByte);
  if( !aaSorted ){
    return SQLITE_NOMEM;
  }
................................................................................
      aaSorted[ii][jj] = jj;
    }
    SortByDimension(pRtree, aaSorted[ii], nCell, ii, aCell, aSpare);
  }

  for(ii=0; ii<pRtree->nDim; ii++){
    float margin = 0.0;
    float fBestOverlap;
    float fBestArea;
    int iBestLeft;
    int nLeft;

    for(
      nLeft=RTREE_MINCELLS(pRtree); 
      nLeft<=(nCell-RTREE_MINCELLS(pRtree)); 
      nLeft++
    ){
................................................................................
}

static int deleteCell(Rtree *, RtreeNode *, int, int);

static int removeNode(Rtree *pRtree, RtreeNode *pNode, int iHeight){
  int rc;
  int rc2;
  RtreeNode *pParent;
  int iCell;

  assert( pNode->nRef==1 );

  /* Remove the entry in the parent cell. */
  rc = nodeParentIndex(pRtree, pNode, &iCell);
  if( rc==SQLITE_OK ){
................................................................................
    if( ii==(nCell-1) ){
      memcpy(&aCell[ii], pCell, sizeof(RtreeCell));
    }else{
      nodeGetCell(pRtree, pNode, ii, &aCell[ii]);
    }
    aOrder[ii] = ii;
    for(iDim=0; iDim<pRtree->nDim; iDim++){
      aCenterCoord[iDim] += DCOORD(aCell[ii].aCoord[iDim*2]);
      aCenterCoord[iDim] += DCOORD(aCell[ii].aCoord[iDim*2+1]);
    }
  }
  for(iDim=0; iDim<pRtree->nDim; iDim++){
    aCenterCoord[iDim] = aCenterCoord[iDim]/((float)nCell*2.0);
  }

  for(ii=0; ii<nCell; ii++){
    aDistance[ii] = 0.0;
    for(iDim=0; iDim<pRtree->nDim; iDim++){
      float coord = DCOORD(aCell[ii].aCoord[iDim*2+1]) - 
          DCOORD(aCell[ii].aCoord[iDim*2]);
      aDistance[ii] += (coord-aCenterCoord[iDim])*(coord-aCenterCoord[iDim]);
    }
  }

  SortByDistance(aOrder, nCell, aDistance, aSpare);
  nodeZero(pRtree, pNode);

................................................................................
    RtreeNode *pInsert;
    RtreeCell cell;
    nodeGetCell(pRtree, pNode, ii, &cell);

    /* Find a node to store this cell in. pNode->iNode currently contains
    ** the height of the sub-tree headed by the cell.
    */
    rc = ChooseLeaf(pRtree, &cell, pNode->iNode, &pInsert);
    if( rc==SQLITE_OK ){
      int rc2;
      rc = rtreeInsertCell(pRtree, pInsert, &cell, pNode->iNode);
      rc2 = nodeRelease(pRtree, pInsert);
      if( rc==SQLITE_OK ){
        rc = rc2;
      }
    }
  }
  return rc;
................................................................................
  sqlite3 *db,                    /* Database handle */
  Rtree *pRtree,                  /* Rtree handle */
  int isCreate                    /* True for xCreate, false for xConnect */
){
  int rc;
  char *zSql;
  if( isCreate ){
    int iPageSize;
    zSql = sqlite3_mprintf("PRAGMA %Q.page_size", pRtree->zDb);
    rc = getIntFromStmt(db, zSql, &iPageSize);
    if( rc==SQLITE_OK ){
      pRtree->iNodeSize = iPageSize-64;
      if( (4+pRtree->nBytesPerCell*RTREE_MAXCELLS)<pRtree->iNodeSize ){
        pRtree->iNodeSize = 4+pRtree->nBytesPerCell*RTREE_MAXCELLS;
      }
................................................................................
**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** This file implements a tokenizer for fts3 based on the ICU library.
** 
** $Id: fts3_icu.c,v 1.3 2008/09/01 18:34:20 danielk1977 Exp $
*/

#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3)
#ifdef SQLITE_ENABLE_ICU


#include <unicode/ubrk.h>
#include <unicode/utf16.h>

**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.7.7"
#define SQLITE_VERSION_NUMBER 3007007
#define SQLITE_SOURCE_ID      "2011-06-24 11:29:51 9b191bb4c7c1e1b12b188c0b3eee1f8f587887c8"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version, sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
................................................................................
**
** ^The sqlite3_exec() interface runs zero or more UTF-8 encoded,
** semicolon-separate SQL statements passed into its 2nd argument,
** in the context of the [database connection] passed in as its 1st
** argument.  ^If the callback function of the 3rd argument to
** sqlite3_exec() is not NULL, then it is invoked for each result row
** coming out of the evaluated SQL statements.  ^The 4th argument to
** sqlite3_exec() is relayed through to the 1st argument of each
** callback invocation.  ^If the callback pointer to sqlite3_exec()
** is NULL, then no callback is ever invoked and result rows are
** ignored.
**
** ^If an error occurs while evaluating the SQL statements passed into
** sqlite3_exec(), then execution of the current statement stops and
** subsequent statements are skipped.  ^If the 5th parameter to sqlite3_exec()
................................................................................
** of good-quality randomness into zOut.  The return value is
** the actual number of bytes of randomness obtained.
** The xSleep() method causes the calling thread to sleep for at
** least the number of microseconds given.  ^The xCurrentTime()
** method returns a Julian Day Number for the current date and time as
** a floating point value.
** ^The xCurrentTimeInt64() method returns, as an integer, the Julian
** Day Number multiplied by 86400000 (the number of milliseconds in 
** a 24-hour day).  
** ^SQLite will use the xCurrentTimeInt64() method to get the current
** date and time if that method is available (if iVersion is 2 or 
** greater and the function pointer is not NULL) and will fall back
** to xCurrentTime() if xCurrentTimeInt64() is unavailable.
**
** ^The xSetSystemCall(), xGetSystemCall(), and xNestSystemCall() interfaces
................................................................................
** ^SQLite will never require a scratch buffer that is more than 6
** times the database page size. ^If SQLite needs needs additional
** scratch memory beyond what is provided by this configuration option, then 
** [sqlite3_malloc()] will be used to obtain the memory needed.</dd>
**
** [[SQLITE_CONFIG_PAGECACHE]] <dt>SQLITE_CONFIG_PAGECACHE</dt>
** <dd> ^This option specifies a static memory buffer that SQLite can use for
** the database page cache with the default page cache implementation.  
** This configuration should not be used if an application-define page
** cache implementation is loaded using the SQLITE_CONFIG_PCACHE option.
** There are three arguments to this option: A pointer to 8-byte aligned
** memory, the size of each page buffer (sz), and the number of pages (N).
** The sz argument should be the size of the largest database page
** (a power of two between 512 and 32768) plus a little extra for each
** page header.  ^The page header size is 20 to 40 bytes depending on
................................................................................
** automatically deleted as soon as the database connection is closed.
**
** [[URI filenames in sqlite3_open()]] <h3>URI Filenames</h3>
**
** ^If [URI filename] interpretation is enabled, and the filename argument
** begins with "file:", then the filename is interpreted as a URI. ^URI
** filename interpretation is enabled if the [SQLITE_OPEN_URI] flag is
** set in the fourth argument to sqlite3_open_v2(), or if it has
** been enabled globally using the [SQLITE_CONFIG_URI] option with the
** [sqlite3_config()] method or by the [SQLITE_USE_URI] compile-time option.
** As of SQLite version 3.7.7, URI filename interpretation is turned off
** by default, but future releases of SQLite might enable URI filename
** interpretation by default.  See "[URI filenames]" for additional
** information.
**
** URI filenames are parsed according to RFC 3986. ^If the URI contains an
** authority, then it must be either an empty string or the string 
** "localhost". ^If the authority is not an empty string or "localhost", an 
** error is returned to the caller. ^The fragment component of a URI, if 
** present, is ignored.
................................................................................
** [SQLITE_DONE], [SQLITE_ROW], [SQLITE_ERROR], or [SQLITE_MISUSE].
** ^With the "v2" interface, any of the other [result codes] or
** [extended result codes] might be returned as well.
**
** ^[SQLITE_BUSY] means that the database engine was unable to acquire the
** database locks it needs to do its job.  ^If the statement is a [COMMIT]
** or occurs outside of an explicit transaction, then you can retry the
** statement.  If the statement is not a [COMMIT] and occurs within an
** explicit transaction then you should rollback the transaction before
** continuing.
**
** ^[SQLITE_DONE] means that the statement has finished executing
** successfully.  sqlite3_step() should not be called again on this virtual
** machine without first calling [sqlite3_reset()] to reset the virtual
** machine back to its initial state.
................................................................................
SQLITE_API int sqlite3_column_type(sqlite3_stmt*, int iCol);
SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol);

/*
** CAPI3REF: Destroy A Prepared Statement Object
**
** ^The sqlite3_finalize() function is called to delete a [prepared statement].
** ^If the most recent evaluation of the statement encountered no errors
** or if the statement is never been evaluated, then sqlite3_finalize() returns
** SQLITE_OK.  ^If the most recent evaluation of statement S failed, then
** sqlite3_finalize(S) returns the appropriate [error code] or
** [extended error code].
**
** ^The sqlite3_finalize(S) routine can be called at any point during
** the life cycle of [prepared statement] S:
................................................................................
** ^The implementation is not required to provided versions of these
** routines that actually work. If the implementation does not provide working
** versions of these routines, it should at least provide stubs that always
** return true so that one does not get spurious assertion failures.
**
** ^If the argument to sqlite3_mutex_held() is a NULL pointer then
** the routine should return 1.   This seems counter-intuitive since
** clearly the mutex cannot be held if it does not exist.  But
** the reason the mutex does not exist is because the build is not
** using mutexes.  And we do not want the assert() containing the
** call to sqlite3_mutex_held() to fail, so a non-zero return is
** the appropriate thing to do.  ^The sqlite3_mutex_notheld()
** interface should also return 1 when given a NULL pointer.
*/
#ifndef NDEBUG
................................................................................
#define SQLITE_TESTCTRL_ASSERT                  12
#define SQLITE_TESTCTRL_ALWAYS                  13
#define SQLITE_TESTCTRL_RESERVE                 14
#define SQLITE_TESTCTRL_OPTIMIZATIONS           15
#define SQLITE_TESTCTRL_ISKEYWORD               16
#define SQLITE_TESTCTRL_PGHDRSZ                 17
#define SQLITE_TESTCTRL_SCRATCHMALLOC           18
#define SQLITE_TESTCTRL_LOCALTIME_FAULT         19
#define SQLITE_TESTCTRL_LAST                    19

/*
** CAPI3REF: SQLite Runtime Status
**
** ^This interface is used to retrieve runtime status information
** about the performance of SQLite, and optionally to reset various
** highwater marks.  ^The first argument is an integer code for
................................................................................
** stored in the cache, both pinned and unpinned.
** 
** [[the xFetch() page cache methods]]
** The xFetch() method locates a page in the cache and returns a pointer to 
** the page, or a NULL pointer.
** A "page", in this context, means a buffer of szPage bytes aligned at an
** 8-byte boundary. The page to be fetched is determined by the key. ^The
** minimum key value is 1.  After it has been retrieved using xFetch, the page 
** is considered to be "pinned".
**
** If the requested page is already in the page cache, then the page cache
** implementation must return a pointer to the page buffer with its content
** intact.  If the requested page is not already in the cache, then the
** cache implementation should use the value of the createFlag
** parameter to help it determined what action to take:
................................................................................
#define SQLITE_QueryFlattener 0x01        /* Disable query flattening */
#define SQLITE_ColumnCache    0x02        /* Disable the column cache */
#define SQLITE_IndexSort      0x04        /* Disable indexes for sorting */
#define SQLITE_IndexSearch    0x08        /* Disable indexes for searching */
#define SQLITE_IndexCover     0x10        /* Disable index covering table */
#define SQLITE_GroupByOrder   0x20        /* Disable GROUPBY cover of ORDERBY */
#define SQLITE_FactorOutConst 0x40        /* Disable factoring out constants */
#define SQLITE_IdxRealAsInt   0x80        /* Store REAL as INT in indices */
#define SQLITE_OptMask        0xff        /* Mask of all disablable opts */

/*
** Possible values for the sqlite.magic field.
** The numbers are obtained at random and have no special meaning, other
** than being distinct from one another.
*/
................................................................................
  int isMutexInit;                  /* True after mutexes are initialized */
  int isMallocInit;                 /* True after malloc is initialized */
  int isPCacheInit;                 /* True after malloc is initialized */
  sqlite3_mutex *pInitMutex;        /* Mutex used by sqlite3_initialize() */
  int nRefInitMutex;                /* Number of users of pInitMutex */
  void (*xLog)(void*,int,const char*); /* Function for logging */
  void *pLogArg;                       /* First argument to xLog() */
  int bLocaltimeFault;              /* True to fail localtime() calls */
};

/*
** Context pointer passed down through the tree-walk.
*/
struct Walker {
  int (*xExprCallback)(Walker*, Expr*);     /* Callback for expressions */
................................................................................
   0,                         /* isMutexInit */
   0,                         /* isMallocInit */
   0,                         /* isPCacheInit */
   0,                         /* pInitMutex */
   0,                         /* nRefInitMutex */
   0,                         /* xLog */
   0,                         /* pLogArg */
   0,                         /* bLocaltimeFault */
};


/*
** Hash table for global functions - functions common to all
** database connections.  After initialization, this table is
** read-only.
................................................................................
**      Willmann-Bell, Inc
**      Richmond, Virginia (USA)
*/
#include <time.h>

#ifndef SQLITE_OMIT_DATETIME_FUNCS


















/*
** A structure for holding a single date and time.
*/
typedef struct DateTime DateTime;
struct DateTime {
  sqlite3_int64 iJD; /* The julian day number times 86400000 */
................................................................................
** Clear the YMD and HMS and the TZ
*/
static void clearYMD_HMS_TZ(DateTime *p){
  p->validYMD = 0;
  p->validHMS = 0;
  p->validTZ = 0;
}

/*
** On recent Windows platforms, the localtime_s() function is available
** as part of the "Secure CRT". It is essentially equivalent to 
** localtime_r() available under most POSIX platforms, except that the 
** order of the parameters is reversed.
**
** See http://msdn.microsoft.com/en-us/library/a442x3ye(VS.80).aspx.
**
** If the user has not indicated to use localtime_r() or localtime_s()
** already, check for an MSVC build environment that provides 
** localtime_s().
*/
#if !defined(HAVE_LOCALTIME_R) && !defined(HAVE_LOCALTIME_S) && \
     defined(_MSC_VER) && defined(_CRT_INSECURE_DEPRECATE)
#define HAVE_LOCALTIME_S 1
#endif

#ifndef SQLITE_OMIT_LOCALTIME
/*
** The following routine implements the rough equivalent of localtime_r()
** using whatever operating-system specific localtime facility that
** is available.  This routine returns 0 on success and
** non-zero on any kind of error.
**
** If the sqlite3GlobalConfig.bLocaltimeFault variable is true then this
** routine will always fail.
*/
static int osLocaltime(time_t *t, struct tm *pTm){
  int rc;
#if (!defined(HAVE_LOCALTIME_R) || !HAVE_LOCALTIME_R) \
      && (!defined(HAVE_LOCALTIME_S) || !HAVE_LOCALTIME_S)
  struct tm *pX;
#if SQLITE_THREADSAFE>0
  sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER);
#endif
  sqlite3_mutex_enter(mutex);
  pX = localtime(t);
#ifndef SQLITE_OMIT_BUILTIN_TEST
  if( sqlite3GlobalConfig.bLocaltimeFault ) pX = 0;
#endif
  if( pX ) *pTm = *pX;
  sqlite3_mutex_leave(mutex);
  rc = pX==0;
#else
#ifndef SQLITE_OMIT_BUILTIN_TEST
  if( sqlite3GlobalConfig.bLocaltimeFault ) return 1;
#endif
#if defined(HAVE_LOCALTIME_R) && HAVE_LOCALTIME_R
  rc = localtime_r(t, pTm)==0;
#else
  rc = localtime_s(pTm, t);
#endif /* HAVE_LOCALTIME_R */
#endif /* HAVE_LOCALTIME_R || HAVE_LOCALTIME_S */
  return rc;
}
#endif /* SQLITE_OMIT_LOCALTIME */


#ifndef SQLITE_OMIT_LOCALTIME
/*
** Compute the difference (in milliseconds) between localtime and UTC

** (a.k.a. GMT) for the time value p where p is in UTC. If no error occurs,
** return this value and set *pRc to SQLITE_OK. 
**
** Or, if an error does occur, set *pRc to SQLITE_ERROR. The returned value
** is undefined in this case.
*/
static sqlite3_int64 localtimeOffset(
  DateTime *p,                    /* Date at which to calculate offset */
  sqlite3_context *pCtx,          /* Write error here if one occurs */
  int *pRc                        /* OUT: Error code. SQLITE_OK or ERROR */
){
  DateTime x, y;
  time_t t;
  struct tm sLocal;

  /* Initialize the contents of sLocal to avoid a compiler warning. */
  memset(&sLocal, 0, sizeof(sLocal));

  x = *p;
  computeYMD_HMS(&x);
  if( x.Y<1971 || x.Y>=2038 ){
    x.Y = 2000;
    x.M = 1;
    x.D = 1;
    x.h = 0;
................................................................................
    int s = (int)(x.s + 0.5);
    x.s = s;
  }
  x.tz = 0;
  x.validJD = 0;
  computeJD(&x);
  t = (time_t)(x.iJD/1000 - 21086676*(i64)10000);



  if( osLocaltime(&t, &sLocal) ){






    sqlite3_result_error(pCtx, "local time unavailable", -1);
    *pRc = SQLITE_ERROR;
    return 0;
  }




  y.Y = sLocal.tm_year + 1900;
  y.M = sLocal.tm_mon + 1;
  y.D = sLocal.tm_mday;
  y.h = sLocal.tm_hour;
  y.m = sLocal.tm_min;
  y.s = sLocal.tm_sec;















  y.validYMD = 1;
  y.validHMS = 1;
  y.validJD = 0;
  y.validTZ = 0;
  computeJD(&y);
  *pRc = SQLITE_OK;
  return y.iJD - x.iJD;
}
#endif /* SQLITE_OMIT_LOCALTIME */

/*
** Process a modifier to a date-time stamp.  The modifiers are
** as follows:
................................................................................
**     start of week
**     start of day
**     weekday N
**     unixepoch
**     localtime
**     utc
**
** Return 0 on success and 1 if there is any kind of error. If the error
** is in a system call (i.e. localtime()), then an error message is written
** to context pCtx. If the error is an unrecognized modifier, no error is
** written to pCtx.
*/
static int parseModifier(sqlite3_context *pCtx, const char *zMod, DateTime *p){
  int rc = 1;
  int n;
  double r;
  char *z, zBuf[30];
  z = zBuf;
  for(n=0; n<ArraySize(zBuf)-1 && zMod[n]; n++){
    z[n] = (char)sqlite3UpperToLower[(u8)zMod[n]];
................................................................................
      /*    localtime
      **
      ** Assuming the current time value is UTC (a.k.a. GMT), shift it to
      ** show local time.
      */
      if( strcmp(z, "localtime")==0 ){
        computeJD(p);
        p->iJD += localtimeOffset(p, pCtx, &rc);
        clearYMD_HMS_TZ(p);

      }
      break;
    }
#endif
    case 'u': {
      /*
      **    unixepoch
................................................................................
        clearYMD_HMS_TZ(p);
        rc = 0;
      }
#ifndef SQLITE_OMIT_LOCALTIME
      else if( strcmp(z, "utc")==0 ){
        sqlite3_int64 c1;
        computeJD(p);
        c1 = localtimeOffset(p, pCtx, &rc);
        if( rc==SQLITE_OK ){
          p->iJD -= c1;
          clearYMD_HMS_TZ(p);
          p->iJD += c1 - localtimeOffset(p, pCtx, &rc);

        }
      }
#endif
      break;
    }
    case 'w': {
      /*
      **    weekday N
................................................................................
  }else{
    z = sqlite3_value_text(argv[0]);
    if( !z || parseDateOrTime(context, (char*)z, p) ){
      return 1;
    }
  }
  for(i=1; i<argc; i++){
    z = sqlite3_value_text(argv[i]);
    if( z==0 || parseModifier(context, (char*)z, p) ) return 1;

  }
  return 0;
}


/*
** The following routines implement the various date and time functions
................................................................................
# endif
#endif /* SQLITE_ENABLE_LOCKING_STYLE */

#if defined(__APPLE__) || (SQLITE_ENABLE_LOCKING_STYLE && !OS_VXWORKS)
# include <sys/mount.h>
#endif

#ifdef HAVE_UTIME
# include <utime.h>
#endif

/*
** Allowed values of unixFile.fsFlags
*/
#define SQLITE_FSFLAGS_IS_MSDOS     0x1

/*
** If we are to be thread-safe, include the pthreads header and define
................................................................................


  /* If we have any lock, then the lock file already exists.  All we have
  ** to do is adjust our internal record of the lock level.
  */
  if( pFile->eFileLock > NO_LOCK ){
    pFile->eFileLock = eFileLock;

    /* Always update the timestamp on the old file */
#ifdef HAVE_UTIME
    utime(zLockFile, NULL);
#else
    utimes(zLockFile, NULL);
#endif
    return SQLITE_OK;
  }
  
  /* grab an exclusive lock */
  fd = robust_open(zLockFile,O_RDONLY|O_CREAT|O_EXCL,0600);
................................................................................
*/
static void unixShmPurge(unixFile *pFd){
  unixShmNode *p = pFd->pInode->pShmNode;
  assert( unixMutexHeld() );
  if( p && p->nRef==0 ){
    int i;
    assert( p->pInode==pFd->pInode );
    sqlite3_mutex_free(p->mutex);
    for(i=0; i<p->nRegion; i++){
      if( p->h>=0 ){
        munmap(p->apRegion[i], p->szRegion);
      }else{
        sqlite3_free(p->apRegion[i]);
      }
    }
................................................................................
    if( nRem>0 ){
      pFile->lastErrno = GetLastError();
      rc = 1;
    }
  }

  if( rc ){
    if(   ( pFile->lastErrno==ERROR_HANDLE_DISK_FULL )
       || ( pFile->lastErrno==ERROR_DISK_FULL )){
      return SQLITE_FULL;
    }
    return winLogError(SQLITE_IOERR_WRITE, "winWrite", pFile->zPath);
  }
  return SQLITE_OK;
}

................................................................................
    ** caller. Set the error code in the database handle to the same value.
    */ 
    rc = db->errCode = p->rc;
  }
  return (rc&db->errMask);
}

/*
** The maximum number of times that a statement will try to reparse
** itself before giving up and returning SQLITE_SCHEMA.
*/
#ifndef SQLITE_MAX_SCHEMA_RETRY
# define SQLITE_MAX_SCHEMA_RETRY 5
#endif

/*
** This is the top-level implementation of sqlite3_step().  Call
** sqlite3Step() to do most of the work.  If a schema error occurs,
** call sqlite3Reprepare() and try again.
*/
SQLITE_API int sqlite3_step(sqlite3_stmt *pStmt){
  int rc = SQLITE_OK;      /* Result from sqlite3Step() */
................................................................................

  if( vdbeSafetyNotNull(v) ){
    return SQLITE_MISUSE_BKPT;
  }
  db = v->db;
  sqlite3_mutex_enter(db->mutex);
  while( (rc = sqlite3Step(v))==SQLITE_SCHEMA
         && cnt++ < SQLITE_MAX_SCHEMA_RETRY
         && (rc2 = rc = sqlite3Reprepare(v))==SQLITE_OK ){
    sqlite3_reset(pStmt);
    v->expired = 0;
  }
  if( rc2!=SQLITE_OK && ALWAYS(v->isPrepareV2) && ALWAYS(db->pErr) ){
    /* This case occurs after failing to recompile an sql statement. 
    ** The error message from the SQL compiler has already been loaded 
................................................................................
  REGISTER_TRACE(pOp->p1, pIn1);
  pc = u.aa.pcDest;
  break;
}

/* Opcode:  HaltIfNull  P1 P2 P3 P4 *
**
** Check the value in register P3.  If it is NULL then Halt using
** parameter P1, P2, and P4 as if this were a Halt instruction.  If the
** value in register P3 is not NULL, then this routine is a no-op.
*/
case OP_HaltIfNull: {      /* in3 */
  pIn3 = &aMem[pOp->p3];
  if( (pIn3->flags & MEM_Null)==0 ) break;
  /* Fall through into OP_Halt */
................................................................................
** This works just like the Lt opcode except that the jump is taken if
** the operands in registers P1 and P3 are not equal.  See the Lt opcode for
** additional information.
**
** If SQLITE_NULLEQ is set in P5 then the result of comparison is always either
** true or false and is never NULL.  If both operands are NULL then the result
** of comparison is false.  If either operand is NULL then the result is true.
** If neither operand is NULL the result is the same as it would be if
** the SQLITE_NULLEQ flag were omitted from P5.
*/
/* Opcode: Eq P1 P2 P3 P4 P5
**
** This works just like the Lt opcode except that the jump is taken if
** the operands in registers P1 and P3 are equal.
** See the Lt opcode for additional information.
**
** If SQLITE_NULLEQ is set in P5 then the result of comparison is always either
** true or false and is never NULL.  If both operands are NULL then the result
** of comparison is true.  If either operand is NULL then the result is false.
** If neither operand is NULL the result is the same as it would be if
** the SQLITE_NULLEQ flag were omitted from P5.
*/
/* Opcode: Le P1 P2 P3 P4 P5
**
** This works just like the Lt opcode except that the jump is taken if
** the content of register P3 is less than or equal to the content of
** register P1.  See the Lt opcode for additional information.
................................................................................
    sqlite3VdbeMemSetInt64(pOut, ~sqlite3VdbeIntValue(pIn1));
  }
  break;
}

/* Opcode: If P1 P2 P3 * *
**
** Jump to P2 if the value in register P1 is true.  The value
** is considered true if it is numeric and non-zero.  If the value
** in P1 is NULL then take the jump if P3 is true.
*/
/* Opcode: IfNot P1 P2 P3 * *
**
** Jump to P2 if the value in register P1 is False.  The value
** is considered true if it has a numeric value of zero.  If the value
** in P1 is NULL then take the jump if P3 is true.
*/
case OP_If:                 /* jump, in1 */
case OP_IfNot: {            /* jump, in1 */
#if 0  /* local variables moved into u.al */
  int c;
................................................................................
    }
  }
  break;
}

/* Opcode: NotExists P1 P2 P3 * *
**
** Use the content of register P3 as an integer key.  If a record 
** with that key does not exist in table of P1, then jump to P2. 
** If the record does exist, then fall through.  The cursor is left 
** pointing to the record if it exists.
**
** The difference between this operation and NotFound is that this
** operation assumes the key is an integer and that P1 is a table whereas
** NotFound assumes key is a blob constructed from MakeRecord and
................................................................................
** The record number is not previously used as a key in the database
** table that cursor P1 points to.  The new record number is written
** written to register P2.
**
** If P3>0 then P3 is a register in the root frame of this VDBE that holds 
** the largest previously generated record number. No new record numbers are
** allowed to be less than this value. When this value reaches its maximum, 
** an SQLITE_FULL error is generated. The P3 register is updated with the '
** generated record number. This P3 mechanism is used to help implement the
** AUTOINCREMENT feature.
*/
case OP_NewRowid: {           /* out2-prerelease */
#if 0  /* local variables moved into u.be */
  i64 v;                 /* The new rowid */
  VdbeCursor *pC;        /* Cursor of table to get the new rowid */
................................................................................
  }
  u.bm.pC->rowidIsValid = 0;
  break;
}

/* Opcode: IdxInsert P1 P2 P3 * P5
**
** Register P2 holds an SQL index key made using the
** MakeRecord instructions.  This opcode writes that key
** into the index P1.  Data for the entry is nil.
**
** P3 is a flag that provides a hint to the b-tree layer that this
** insert is likely to be an append.
**
** This instruction only works for indices.  The equivalent instruction
................................................................................
      sqlite3VdbeAddOp2(v, OP_SCopy, regBase+nCol, regBase+j);
    }else{
      sqlite3VdbeAddOp3(v, OP_Column, iCur, idx, regBase+j);
      sqlite3ColumnDefault(v, pTab, idx, -1);
    }
  }
  if( doMakeRec ){
    const char *zAff;
    if( pTab->pSelect || (pParse->db->flags & SQLITE_IdxRealAsInt)!=0 ){
      zAff = 0;
    }else{
      zAff = sqlite3IndexAffinityStr(v, pIdx);
    }
    sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase, nCol+1, regOut);
    sqlite3VdbeChangeP4(v, -1, zAff, P4_TRANSIENT);
  }
  sqlite3ReleaseTempRange(pParse, regBase, nCol+1);
  return regBase;
}

/************** End of delete.c **********************************************/
/************** Begin file func.c ********************************************/
................................................................................
      ppNew = va_arg(ap, void**);
      pFree = va_arg(ap, void*);
      if( sz ) *ppNew = sqlite3ScratchMalloc(sz);
      sqlite3ScratchFree(pFree);
      break;
    }

    /*   sqlite3_test_control(SQLITE_TESTCTRL_LOCALTIME_FAULT, int onoff);
    **
    ** If parameter onoff is non-zero, configure the wrappers so that all
    ** subsequent calls to localtime() and variants fail. If onoff is zero,
    ** undo this setting.
    */
    case SQLITE_TESTCTRL_LOCALTIME_FAULT: {
      sqlite3GlobalConfig.bLocaltimeFault = va_arg(ap, int);
      break;
    }

  }
  va_end(ap);
#endif /* SQLITE_OMIT_BUILTIN_TEST */
  return rc;
}

/*
................................................................................
** older data.
**
** TODO(shess) Provide a VACUUM type operation to clear out all
** deletions and duplications.  This would basically be a forced merge
** into a single segment.
*/







/************** Include fts3Int.h in the middle of fts3.c ********************/
/************** Begin file fts3Int.h *****************************************/
/*
** 2009 Nov 12
**
** The author disclaims copyright to this source code.  In place of
** a legal notice, here is a blessing:
................................................................................
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
******************************************************************************
**
*/

#ifndef _FTSINT_H
#define _FTSINT_H

#if !defined(NDEBUG) && !defined(SQLITE_DEBUG) 
# define NDEBUG 1
#endif

/*
** FTS4 is really an extension for FTS3.  It is enabled using the
** SQLITE_ENABLE_FTS3 macro.  But to avoid confusion we also all
** the SQLITE_ENABLE_FTS4 macro to serve as an alisse for SQLITE_ENABLE_FTS3.
*/
#if defined(SQLITE_ENABLE_FTS4) && !defined(SQLITE_ENABLE_FTS3)
# define SQLITE_ENABLE_FTS3
#endif

#ifdef SQLITE_ENABLE_FTS3
/************** Include fts3_tokenizer.h in the middle of fts3Int.h **********/
/************** Begin file fts3_tokenizer.h **********************************/
/*
** 2006 July 10
**
** The author disclaims copyright to this source code.
**
................................................................................
  sqlite3_int64 iPrevId;          /* Previous id read from aDoclist */
  char *pNextId;                  /* Pointer into the body of aDoclist */
  char *aDoclist;                 /* List of docids for full-text queries */
  int nDoclist;                   /* Size of buffer at aDoclist */
  u8 bDesc;                       /* True to sort in descending order */
  int eEvalmode;                  /* An FTS3_EVAL_XX constant */
  int nRowAvg;                    /* Average size of database rows, in pages */
  sqlite3_int64 nDoc;             /* Documents in table */

  int isMatchinfoNeeded;          /* True when aMatchinfo[] needs filling in */
  u32 *aMatchinfo;                /* Information about most recent match */
  int nMatchinfo;                 /* Number of elements in aMatchinfo[] */
  char *zMatchinfo;               /* Matchinfo specification */
};

................................................................................
  char *z;                        /* Text of the token */
  int n;                          /* Number of bytes in buffer z */
  int isPrefix;                   /* True if token ends with a "*" character */

  /* Variables above this point are populated when the expression is
  ** parsed (by code in fts3_expr.c). Below this point the variables are
  ** used when evaluating the expression. */

  Fts3DeferredToken *pDeferred;   /* Deferred token object for this token */
  Fts3MultiSegReader *pSegcsr;    /* Segment-reader for this token */
};

struct Fts3Phrase {
  /* Cache of doclist for this phrase. */
  Fts3Doclist doclist;
  int bIncr;                 /* True if doclist is loaded incrementally */
  int iDoclistToken;

  /* Variables below this point are populated by fts3_expr.c when parsing 
  ** a MATCH expression. Everything above is part of the evaluation phase. 
  */
  int nToken;                /* Number of tokens in the phrase */
  int iColumn;               /* Index of column this phrase must match */
  Fts3PhraseToken aToken[1]; /* One entry for each token in the phrase */
................................................................................
  int nSegment;                   /* Size of apSegment array */
  int nAdvance;                   /* How many seg-readers to advance */
  Fts3SegFilter *pFilter;         /* Pointer to filter object */
  char *aBuffer;                  /* Buffer to merge doclists in */
  int nBuffer;                    /* Allocated size of aBuffer[] in bytes */

  int iColFilter;                 /* If >=0, filter for this column */
  int bRestart;

  /* Used by fts3.c only. */
  int nCost;                      /* Cost of running iterator */
  int bLookup;                    /* True if a lookup of a single entry. */

  /* Output values. Valid only after Fts3SegReaderStep() returns SQLITE_ROW. */
  char *zTerm;                    /* Pointer to term buffer */
................................................................................

SQLITE_PRIVATE int sqlite3Fts3MsrIncrStart(
    Fts3Table*, Fts3MultiSegReader*, int, const char*, int);
SQLITE_PRIVATE int sqlite3Fts3MsrIncrNext(
    Fts3Table *, Fts3MultiSegReader *, sqlite3_int64 *, char **, int *);
SQLITE_PRIVATE char *sqlite3Fts3EvalPhrasePoslist(Fts3Cursor *, Fts3Expr *, int iCol); 
SQLITE_PRIVATE int sqlite3Fts3MsrOvfl(Fts3Cursor *, Fts3MultiSegReader *, int *);
SQLITE_PRIVATE int sqlite3Fts3MsrIncrRestart(Fts3MultiSegReader *pCsr);

SQLITE_PRIVATE int sqlite3Fts3DeferredTokenList(Fts3DeferredToken *, char **, int *);

#endif /* SQLITE_ENABLE_FTS3 */
#endif /* _FTSINT_H */

/************** End of fts3Int.h *********************************************/
/************** Continuing where we left off in fts3.c ***********************/
#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3)

#if defined(SQLITE_ENABLE_FTS3) && !defined(SQLITE_CORE)
# define SQLITE_CORE 1
#endif


#ifndef SQLITE_CORE 
  SQLITE_EXTENSION_INIT1
#endif

/* 
................................................................................
      rc = SQLITE_NOMEM;
    }else{
      rc = sqlite3_prepare(p->db, zSql, -1, &pStmt, 0);
      if( rc==SQLITE_OK ){
        sqlite3_step(pStmt);
        p->nPgsz = sqlite3_column_int(pStmt, 0);
        rc = sqlite3_finalize(pStmt);
      }else if( rc==SQLITE_AUTH ){
        p->nPgsz = 1024;
        rc = SQLITE_OK;
      }
    }
    assert( p->nPgsz>0 || rc!=SQLITE_OK );
    sqlite3_free(zSql);
    *pRc = rc;
  }
}
................................................................................
  p->zDb = zCsr;
  memcpy(zCsr, argv[1], nDb);
  zCsr += nDb;

  /* Fill in the azColumn array */
  for(iCol=0; iCol<nCol; iCol++){
    char *z; 
    int n = 0;
    z = (char *)sqlite3Fts3NextToken(aCol[iCol], &n);
    memcpy(zCsr, z, n);
    zCsr[n] = '\0';
    sqlite3Fts3Dequote(zCsr);
    p->azColumn[iCol] = zCsr;
    zCsr += n+1;
    assert( zCsr <= &((char *)p)[nByte] );
................................................................................
  return rc;
}

/*
** Implementation of xBegin() method. This is a no-op.
*/
static int fts3BeginMethod(sqlite3_vtab *pVtab){

  TESTONLY( Fts3Table *p = (Fts3Table*)pVtab );
  UNUSED_PARAMETER(pVtab);
  assert( p->pSegments==0 );
  assert( p->nPendingData==0 );
  assert( p->inTransaction!=1 );
  TESTONLY( p->inTransaction = 1 );
  TESTONLY( p->mxSavepoint = -1; );
  return SQLITE_OK;
}
................................................................................

/*
** Implementation of xCommit() method. This is a no-op. The contents of
** the pending-terms hash-table have already been flushed into the database
** by fts3SyncMethod().
*/
static int fts3CommitMethod(sqlite3_vtab *pVtab){

  TESTONLY( Fts3Table *p = (Fts3Table*)pVtab );
  UNUSED_PARAMETER(pVtab);
  assert( p->nPendingData==0 );
  assert( p->inTransaction!=0 );
  assert( p->pSegments==0 );
  TESTONLY( p->inTransaction = 0 );
  TESTONLY( p->mxSavepoint = -1; );
  return SQLITE_OK;
}
................................................................................
            pToken->z, pToken->n, pToken->isPrefix, &pToken->pSegcsr
        );
        if( rc!=SQLITE_OK ){
          *pRc = rc;
          return;
        }
      }
      assert( pExpr->pPhrase->iDoclistToken==0 );
      pExpr->pPhrase->iDoclistToken = -1;
    }else{
      *pnOr += (pExpr->eType==FTSQUERY_OR);
      fts3EvalAllocateReaders(pCsr, pExpr->pLeft, pnToken, pnOr, pRc);
      fts3EvalAllocateReaders(pCsr, pExpr->pRight, pnToken, pnOr, pRc);
    }
  }
}

static void fts3EvalPhraseMergeToken(
  Fts3Table *pTab,
  Fts3Phrase *p,
  int iToken,
  char *pList,
  int nList
){
  assert( iToken!=p->iDoclistToken );

  if( pList==0 ){
    sqlite3_free(p->doclist.aAll);
    p->doclist.aAll = 0;
    p->doclist.nAll = 0;
  }

  else if( p->iDoclistToken<0 ){
    p->doclist.aAll = pList;
    p->doclist.nAll = nList;
  }

  else if( p->doclist.aAll==0 ){
    sqlite3_free(pList);
  }

  else {
    char *pLeft;
    char *pRight;
    int nLeft;
    int nRight;
    int nDiff;

    if( p->iDoclistToken<iToken ){
      pLeft = p->doclist.aAll;
      nLeft = p->doclist.nAll;
      pRight = pList;
      nRight = nList;
      nDiff = iToken - p->iDoclistToken;
    }else{
      pRight = p->doclist.aAll;
      nRight = p->doclist.nAll;
      pLeft = pList;
      nLeft = nList;
      nDiff = p->iDoclistToken - iToken;
    }

    fts3DoclistPhraseMerge(pTab->bDescIdx, nDiff, pLeft, nLeft, pRight,&nRight);
    sqlite3_free(pLeft);
    p->doclist.aAll = pRight;
    p->doclist.nAll = nRight;
  }

  if( iToken>p->iDoclistToken ) p->iDoclistToken = iToken;
}

static int fts3EvalPhraseLoad(
  Fts3Cursor *pCsr, 
  Fts3Phrase *p
){
  Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab;
  int iToken;
  int rc = SQLITE_OK;





  for(iToken=0; rc==SQLITE_OK && iToken<p->nToken; iToken++){
    Fts3PhraseToken *pToken = &p->aToken[iToken];

    assert( pToken->pDeferred==0 || pToken->pSegcsr==0 );

    if( pToken->pSegcsr ){
      int nThis = 0;
      char *pThis = 0;
      rc = fts3TermSelect(pTab, pToken, p->iColumn, 1, &nThis, &pThis);
      if( rc==SQLITE_OK ){
        fts3EvalPhraseMergeToken(pTab, p, iToken, pThis, nThis);















      }

    }
    assert( pToken->pSegcsr==0 );
  }








  return rc;
}

static int fts3EvalDeferredPhrase(Fts3Cursor *pCsr, Fts3Phrase *pPhrase){
  int iToken;
  int rc = SQLITE_OK;

  int nMaxUndeferred = pPhrase->iDoclistToken;
  char *aPoslist = 0;
  int nPoslist = 0;
  int iPrev = -1;

  assert( pPhrase->doclist.bFreeList==0 );

  for(iToken=0; rc==SQLITE_OK && iToken<pPhrase->nToken; iToken++){
................................................................................
          sqlite3_free(aPoslist);
          pPhrase->doclist.pList = 0;
          pPhrase->doclist.nList = 0;
          return SQLITE_OK;
        }
      }
      iPrev = iToken;


    }
  }

  if( iPrev>=0 ){
    if( nMaxUndeferred<0 ){
      pPhrase->doclist.pList = aPoslist;
      pPhrase->doclist.nList = nPoslist;
................................................................................
** used with fts3EvalPhraseNext() to iterate through the matching docids.
*/
static int fts3EvalPhraseStart(Fts3Cursor *pCsr, int bOptOk, Fts3Phrase *p){
  int rc;
  Fts3PhraseToken *pFirst = &p->aToken[0];
  Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab;


  if( pCsr->bDesc==pTab->bDescIdx 
   && bOptOk==1 
   && p->nToken==1 
   && pFirst->pSegcsr 
   && pFirst->pSegcsr->bLookup 
  ){
    /* Use the incremental approach. */
    int iCol = (p->iColumn >= pTab->nColumn ? -1 : p->iColumn);
    rc = sqlite3Fts3MsrIncrStart(
        pTab, pFirst->pSegcsr, iCol, pFirst->z, pFirst->n);
    p->bIncr = 1;

................................................................................
      ** edited in place by fts3EvalNearTrim2(), then pIter may not actually
      ** point to the start of the next docid value. The following line deals
      ** with this case by advancing pIter past the zero-padding added by
      ** fts3EvalNearTrim2().  */
      while( pIter<pEnd && *pIter==0 ) pIter++;

      pDL->pNextDocid = pIter;
      assert( pIter>=&pDL->aAll[pDL->nAll] || *pIter );
      *pbEof = 0;
    }
  }

  return rc;
}

................................................................................
      fts3EvalStartReaders(pCsr, pExpr->pLeft, bOptOk, pRc);
      fts3EvalStartReaders(pCsr, pExpr->pRight, bOptOk, pRc);
      pExpr->bDeferred = (pExpr->pLeft->bDeferred && pExpr->pRight->bDeferred);
    }
  }
}


typedef struct Fts3TokenAndCost Fts3TokenAndCost;
struct Fts3TokenAndCost {
  Fts3Phrase *pPhrase;            /* The phrase the token belongs to */
  int iToken;                     /* Position of token in phrase */
  Fts3PhraseToken *pToken;        /* The token itself */
  Fts3Expr *pRoot; 
  int nOvfl;

  int iCol;                       /* The column the token must match */
};

static void fts3EvalTokenCosts(
  Fts3Cursor *pCsr, 
  Fts3Expr *pRoot, 
  Fts3Expr *pExpr, 
  Fts3TokenAndCost **ppTC,
................................................................................
){
  if( *pRc==SQLITE_OK && pExpr ){
    if( pExpr->eType==FTSQUERY_PHRASE ){
      Fts3Phrase *pPhrase = pExpr->pPhrase;
      int i;
      for(i=0; *pRc==SQLITE_OK && i<pPhrase->nToken; i++){
        Fts3TokenAndCost *pTC = (*ppTC)++;
        pTC->pPhrase = pPhrase;
        pTC->iToken = i;
        pTC->pRoot = pRoot;
        pTC->pToken = &pPhrase->aToken[i];
        pTC->iCol = pPhrase->iColumn;
        *pRc = sqlite3Fts3MsrOvfl(pCsr, pTC->pToken->pSegcsr, &pTC->nOvfl);
      }
    }else if( pExpr->eType!=FTSQUERY_NOT ){
      if( pExpr->eType==FTSQUERY_OR ){
................................................................................
    assert( pTC );

    /* At this point pTC points to the cheapest remaining token. */
    if( ii==0 ){
      if( pTC->nOvfl ){
        nDocEst = (pTC->nOvfl * pTab->nPgsz + pTab->nPgsz) / 10;
      }else{

        Fts3PhraseToken *pToken = pTC->pToken;
        int nList = 0;
        char *pList = 0;
        rc = fts3TermSelect(pTab, pToken, pTC->iCol, 1, &nList, &pList);
        assert( rc==SQLITE_OK || pList==0 );



        if( rc==SQLITE_OK ){



          nDocEst = fts3DoclistCountDocids(1, pList, nList);
          fts3EvalPhraseMergeToken(pTab, pTC->pPhrase, pTC->iToken,pList,nList);
        }
      }
    }else{
      if( pTC->nOvfl>=(nDocEst*nDocSize) ){
        Fts3PhraseToken *pToken = pTC->pToken;
        rc = sqlite3Fts3DeferToken(pCsr, pToken, pTC->iCol);
        fts3SegReaderCursorFree(pToken->pSegcsr);
................................................................................
){
  if( pExpr && *pRc==SQLITE_OK ){
    Fts3Phrase *pPhrase = pExpr->pPhrase;

    if( pPhrase ){
      fts3EvalZeroPoslist(pPhrase);
      if( pPhrase->bIncr ){
        assert( pPhrase->nToken==1 );
        assert( pPhrase->aToken[0].pSegcsr );
        sqlite3Fts3MsrIncrRestart(pPhrase->aToken[0].pSegcsr);
        *pRc = fts3EvalPhraseStart(pCsr, 0, pPhrase);
      }

      pPhrase->doclist.pNextDocid = 0;
      pPhrase->doclist.iDocid = 0;

    }

    pExpr->iDocid = 0;
    pExpr->bEof = 0;
    pExpr->bStart = 0;

    fts3EvalRestart(pCsr, pExpr->pLeft, pRc);
................................................................................
  Fts3Table *pTab = (Fts3Table *)pCsr->base.pVtab;
  int rc = SQLITE_OK;
  int iCol;

  if( pExpr->bDeferred && pExpr->pParent->eType!=FTSQUERY_NEAR ){
    assert( pCsr->nDoc>0 );
    for(iCol=0; iCol<pTab->nColumn; iCol++){
      aiOut[iCol*3 + 1] = (u32)pCsr->nDoc;
      aiOut[iCol*3 + 2] = (u32)pCsr->nDoc;
    }
  }else{
    rc = fts3EvalGatherStats(pCsr, pExpr);
    if( rc==SQLITE_OK ){
      assert( pExpr->aMI );
      for(iCol=0; iCol<pTab->nColumn; iCol++){
        aiOut[iCol*3 + 1] = pExpr->aMI[iCol*3 + 1];
................................................................................
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
******************************************************************************
**
*/

#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3)


typedef struct Fts3auxTable Fts3auxTable;
typedef struct Fts3auxCursor Fts3auxCursor;

struct Fts3auxTable {
................................................................................
**     * The FTS3 module is being built into the core of
**       SQLite (in which case SQLITE_ENABLE_FTS3 is defined).
*/
#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3)




/*
** Class derived from sqlite3_tokenizer
*/
typedef struct porter_tokenizer {
  sqlite3_tokenizer base;      /* Base class */
} porter_tokenizer;

................................................................................
**
**     * The FTS3 module is being built as an extension
**       (in which case SQLITE_CORE is not defined), or
**
**     * The FTS3 module is being built into the core of
**       SQLite (in which case SQLITE_ENABLE_FTS3 is defined).
*/


#ifndef SQLITE_CORE
  SQLITE_EXTENSION_INIT1
#endif

#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3)


/*
** Implementation of the SQL scalar function for accessing the underlying 
** hash table. This function may be called as follows:
**
**   SELECT <function-name>(<key-name>);
................................................................................
  Fts3Hash *pHash,                /* Tokenizer hash table */
  const char *zArg,               /* Tokenizer name */
  sqlite3_tokenizer **ppTok,      /* OUT: Tokenizer (if applicable) */
  char **pzErr                    /* OUT: Set to malloced error message */
){
  int rc;
  char *z = (char *)zArg;
  int n = 0;
  char *zCopy;
  char *zEnd;                     /* Pointer to nul-term of zCopy */
  sqlite3_tokenizer_module *m;

  zCopy = sqlite3_mprintf("%s", zArg);
  if( !zCopy ) return SQLITE_NOMEM;
  zEnd = &zCopy[strlen(zCopy)];
................................................................................
**     * The FTS3 module is being built as an extension
**       (in which case SQLITE_CORE is not defined), or
**
**     * The FTS3 module is being built into the core of
**       SQLite (in which case SQLITE_ENABLE_FTS3 is defined).
*/
#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3)




typedef struct simple_tokenizer {
  sqlite3_tokenizer base;
  char delim[128];             /* flag ASCII delimiters */
} simple_tokenizer;
................................................................................
    );
    if( bEof ){
      pReader->pOffsetList = 0;
    }else{
      pReader->pOffsetList = p;
    }
  }else{
    char *pEnd = &pReader->aDoclist[pReader->nDoclist];

    /* Pointer p currently points at the first byte of an offset list. The
    ** following block advances it to point one byte past the end of
    ** the same offset list. */
    while( 1 ){
  
      /* The following line of code (and the "p++" below the while() loop) is
................................................................................
    /* If required, populate the output variables with a pointer to and the
    ** size of the previous offset-list.
    */
    if( ppOffsetList ){
      *ppOffsetList = pReader->pOffsetList;
      *pnOffsetList = (int)(p - pReader->pOffsetList - 1);
    }

    while( p<pEnd && *p==0 ) p++;
  
    /* If there are no more entries in the doclist, set pOffsetList to
    ** NULL. Otherwise, set Fts3SegReader.iDocid to the next docid and
    ** Fts3SegReader.pOffsetList to point to the next offset list before
    ** returning.
    */
    if( p>=pEnd ){
      pReader->pOffsetList = 0;
    }else{
      rc = fts3SegReaderRequire(pReader, p, FTS3_VARINT_MAX);
      if( rc==SQLITE_OK ){
        sqlite3_int64 iDelta;
        pReader->pOffsetList = p + sqlite3Fts3GetVarint(p, &iDelta);
        if( pTab->bDescIdx ){
................................................................................
  assert( pgsz>0 );

  for(ii=0; rc==SQLITE_OK && ii<pMsr->nSegment; ii++){
    Fts3SegReader *pReader = pMsr->apSegment[ii];
    if( !fts3SegReaderIsPending(pReader) 
     && !fts3SegReaderIsRootOnly(pReader) 
    ){
      sqlite3_int64 jj;
      for(jj=pReader->iStartBlock; jj<=pReader->iLeafEndBlock; jj++){
        int nBlob;
        rc = sqlite3Fts3ReadBlock(p, jj, 0, &nBlob, 0);
        if( rc!=SQLITE_OK ) break;
        if( (nBlob+35)>pgsz ){
          nOvfl += (nBlob + 34)/pgsz;
        }
................................................................................
    p += sqlite3Fts3GetVarint32(p, &iCurrent);
  }

  *ppList = pList;
  *pnList = nList;
}


/*
** Cache data in the Fts3MultiSegReader.aBuffer[] buffer (overwriting any
** existing data). Grow the buffer if required.
**
** If successful, return SQLITE_OK. Otherwise, if an OOM error is encountered
** trying to resize the buffer, return SQLITE_NOMEM.
*/
static int fts3MsrBufferData(
  Fts3MultiSegReader *pMsr,       /* Multi-segment-reader handle */




  char *pList,
  int nList



){

  if( nList>pMsr->nBuffer ){
    char *pNew;
    pMsr->nBuffer = nList*2;

    pNew = (char *)sqlite3_realloc(pMsr->aBuffer, pMsr->nBuffer);
    if( !pNew ) return SQLITE_NOMEM;
    pMsr->aBuffer = pNew;





  }





















  memcpy(pMsr->aBuffer, pList, nList);
  return SQLITE_OK;
}

SQLITE_PRIVATE int sqlite3Fts3MsrIncrNext(
  Fts3Table *p,                   /* Virtual table handle */
  Fts3MultiSegReader *pMsr,       /* Multi-segment-reader handle */
  sqlite3_int64 *piDocid,         /* OUT: Docid value */
................................................................................
      fts3SegReaderSort(pMsr->apSegment, nMerge, j, xCmp);

      if( pMsr->iColFilter>=0 ){
        fts3ColumnFilter(pMsr->iColFilter, &pList, &nList);
      }

      if( nList>0 ){
        if( fts3SegReaderIsPending(apSegment[0]) ){
          rc = fts3MsrBufferData(pMsr, pList, nList+1);
          if( rc!=SQLITE_OK ) return rc;
          *paPoslist = pMsr->aBuffer;
          assert( (pMsr->aBuffer[nList] & 0xFE)==0x00 );
        }else{
          *paPoslist = pList;
        }
        *piDocid = iDocid;
        *pnPoslist = nList;
        break;
      }
    }
  }

  return SQLITE_OK;
}

static int fts3SegReaderStart(
  Fts3Table *p,                   /* Virtual table handle */
  Fts3MultiSegReader *pCsr,       /* Cursor object */
  const char *zTerm,              /* Term searched for (or NULL) */
  int nTerm                       /* Length of zTerm in bytes */
){
  int i;
  int nSeg = pCsr->nSegment;

  /* If the Fts3SegFilter defines a specific term (or term prefix) to search 
  ** for, then advance each segment iterator until it points to a term of
  ** equal or greater value than the specified term. This prevents many
  ** unnecessary merge/sort operations for the case where single segment
  ** b-tree leaf nodes contain more than one term.
  */
  for(i=0; pCsr->bRestart==0 && i<pCsr->nSegment; i++){
    Fts3SegReader *pSeg = pCsr->apSegment[i];
    do {
      int rc = fts3SegReaderNext(p, pSeg, 0);
      if( rc!=SQLITE_OK ) return rc;
    }while( zTerm && fts3SegReaderTermCmp(pSeg, zTerm, nTerm)<0 );
  }
  fts3SegReaderSort(pCsr->apSegment, nSeg, nSeg, fts3SegReaderCmp);

  return SQLITE_OK;
}

SQLITE_PRIVATE int sqlite3Fts3SegReaderStart(
  Fts3Table *p,                   /* Virtual table handle */
  Fts3MultiSegReader *pCsr,       /* Cursor object */
  Fts3SegFilter *pFilter          /* Restrictions on range of iteration */
){
  pCsr->pFilter = pFilter;
  return fts3SegReaderStart(p, pCsr, pFilter->zTerm, pFilter->nTerm);
}

SQLITE_PRIVATE int sqlite3Fts3MsrIncrStart(
  Fts3Table *p,                   /* Virtual table handle */
  Fts3MultiSegReader *pCsr,       /* Cursor object */
  int iCol,                       /* Column to match on. */
  const char *zTerm,              /* Term to iterate through a doclist for */
  int nTerm                       /* Number of bytes in zTerm */
){
  int i;
  int rc;
  int nSegment = pCsr->nSegment;
  int (*xCmp)(Fts3SegReader *, Fts3SegReader *) = (
    p->bDescIdx ? fts3SegReaderDoclistCmpRev : fts3SegReaderDoclistCmp
  );


  assert( pCsr->pFilter==0 );
  assert( zTerm && nTerm>0 );


  /* Advance each segment iterator until it points to the term zTerm/nTerm. */




  rc = fts3SegReaderStart(p, pCsr, zTerm, nTerm);
  if( rc!=SQLITE_OK ) return rc;

  /* Determine how many of the segments actually point to zTerm/nTerm. */
  for(i=0; i<nSegment; i++){


    Fts3SegReader *pSeg = pCsr->apSegment[i];

    if( !pSeg->aNode || fts3SegReaderTermCmp(pSeg, zTerm, nTerm) ){
      break;
    }
  }
  pCsr->nAdvance = i;

  /* Advance each of the segments to point to the first docid. */
  for(i=0; i<pCsr->nAdvance; i++){
    rc = fts3SegReaderFirstDocid(p, pCsr->apSegment[i]);
    if( rc!=SQLITE_OK ) return rc;

  }
  fts3SegReaderSort(pCsr->apSegment, i, i, xCmp);


  assert( iCol<0 || iCol<p->nColumn );
  pCsr->iColFilter = iCol;

  return SQLITE_OK;
}

/*
** This function is called on a MultiSegReader that has been started using
** sqlite3Fts3MsrIncrStart(). One or more calls to MsrIncrNext() may also
** have been made. Calling this function puts the MultiSegReader in such
** a state that if the next two calls are:
**
**   sqlite3Fts3SegReaderStart()
**   sqlite3Fts3SegReaderStep()
**
** then the entire doclist for the term is available in 
** MultiSegReader.aDoclist/nDoclist.
*/
SQLITE_PRIVATE int sqlite3Fts3MsrIncrRestart(Fts3MultiSegReader *pCsr){
  int i;                          /* Used to iterate through segment-readers */

  assert( pCsr->zTerm==0 );
  assert( pCsr->nTerm==0 );
  assert( pCsr->aDoclist==0 );
  assert( pCsr->nDoclist==0 );

  pCsr->nAdvance = 0;
  pCsr->bRestart = 1;
  for(i=0; i<pCsr->nSegment; i++){
    pCsr->apSegment[i]->pOffsetList = 0;
    pCsr->apSegment[i]->nOffsetList = 0;
    pCsr->apSegment[i]->iDocid = 0;
  }

  return SQLITE_OK;
}


SQLITE_PRIVATE int sqlite3Fts3SegReaderStep(
  Fts3Table *p,                   /* Virtual table handle */
  Fts3MultiSegReader *pCsr        /* Cursor object */
){
  int rc = SQLITE_OK;

................................................................................
    }

    assert( isIgnoreEmpty || (isRequirePos && !isColFilter) );
    if( nMerge==1 
     && !isIgnoreEmpty 
     && (p->bDescIdx==0 || fts3SegReaderIsPending(apSegment[0])==0)
    ){
      pCsr->nDoclist = apSegment[0]->nDoclist;
      if( fts3SegReaderIsPending(apSegment[0]) ){
        rc = fts3MsrBufferData(pCsr, apSegment[0]->aDoclist, pCsr->nDoclist);
        pCsr->aDoclist = pCsr->aBuffer;
      }else{
        pCsr->aDoclist = apSegment[0]->aDoclist;
      }
      if( rc==SQLITE_OK ) rc = SQLITE_ROW;
    }else{
      int nDoclist = 0;           /* Size of doclist */
      sqlite3_int64 iPrev = 0;    /* Previous docid stored in doclist */

      /* The current term of the first nMerge entries in the array
      ** of Fts3SegReader objects is the same. The doclists must be merged
      ** and a single term returned with the merged doclist.
................................................................................

      case FTS3_MATCHINFO_NCOL:
        if( bGlobal ) pInfo->aMatchinfo[0] = pInfo->nCol;
        break;
        
      case FTS3_MATCHINFO_NDOC:
        if( bGlobal ){
          sqlite3_int64 nDoc = 0;
          rc = fts3MatchinfoSelectDoctotal(pTab, &pSelect, &nDoc, 0);
          pInfo->aMatchinfo[0] = (u32)nDoc;
        }
        break;

      case FTS3_MATCHINFO_AVGLENGTH: 
        if( bGlobal ){
................................................................................
/*
** Return the N-dimensional volumn of the cell stored in *p.
*/
static float cellArea(Rtree *pRtree, RtreeCell *p){
  float area = 1.0;
  int ii;
  for(ii=0; ii<(pRtree->nDim*2); ii+=2){
    area = (float)(area * (DCOORD(p->aCoord[ii+1]) - DCOORD(p->aCoord[ii])));
  }
  return area;
}

/*
** Return the margin length of cell p. The margin length is the sum
** of the objects size in each dimension.
*/
static float cellMargin(Rtree *pRtree, RtreeCell *p){
  float margin = 0.0;
  int ii;
  for(ii=0; ii<(pRtree->nDim*2); ii+=2){
    margin += (float)(DCOORD(p->aCoord[ii+1]) - DCOORD(p->aCoord[ii]));
  }
  return margin;
}

/*
** Store the union of cells p1 and p2 in p1.
*/
................................................................................
        x1 = MAX(DCOORD(p->aCoord[jj]), DCOORD(aCell[ii].aCoord[jj]));
        x2 = MIN(DCOORD(p->aCoord[jj+1]), DCOORD(aCell[ii].aCoord[jj+1]));

        if( x2<x1 ){
          o = 0.0;
          break;
        }else{
          o = o * (float)(x2-x1);
        }
      }
      overlap += o;
    }
  }
  return overlap;
}
................................................................................
  Rtree *pRtree, 
  RtreeCell *p, 
  RtreeCell *pInsert, 
  RtreeCell *aCell, 
  int nCell, 
  int iExclude
){
  double before;
  double after;
  before = cellOverlap(pRtree, p, aCell, nCell, iExclude);
  cellUnion(pRtree, p, pInsert);
  after = cellOverlap(pRtree, p, aCell, nCell, iExclude);
  return (float)(after-before);
}
#endif


/*
** This function implements the ChooseLeaf algorithm from Gutman[84].
** ChooseSubTree in r*tree terminology.
................................................................................
  int rc;
  int ii;
  RtreeNode *pNode;
  rc = nodeAcquire(pRtree, 1, 0, &pNode);

  for(ii=0; rc==SQLITE_OK && ii<(pRtree->iDepth-iHeight); ii++){
    int iCell;
    sqlite3_int64 iBest = 0;

    float fMinGrowth = 0.0;
    float fMinArea = 0.0;
    float fMinOverlap = 0.0;

    int nCell = NCELL(pNode);
    RtreeCell cell;
    RtreeNode *pChild;

    RtreeCell *aCell = 0;

................................................................................
  RtreeCell *pBboxLeft,
  RtreeCell *pBboxRight
){
  int **aaSorted;
  int *aSpare;
  int ii;

  int iBestDim = 0;
  int iBestSplit = 0;
  float fBestMargin = 0.0;

  int nByte = (pRtree->nDim+1)*(sizeof(int*)+nCell*sizeof(int));

  aaSorted = (int **)sqlite3_malloc(nByte);
  if( !aaSorted ){
    return SQLITE_NOMEM;
  }
................................................................................
      aaSorted[ii][jj] = jj;
    }
    SortByDimension(pRtree, aaSorted[ii], nCell, ii, aCell, aSpare);
  }

  for(ii=0; ii<pRtree->nDim; ii++){
    float margin = 0.0;
    float fBestOverlap = 0.0;
    float fBestArea = 0.0;
    int iBestLeft = 0;
    int nLeft;

    for(
      nLeft=RTREE_MINCELLS(pRtree); 
      nLeft<=(nCell-RTREE_MINCELLS(pRtree)); 
      nLeft++
    ){
................................................................................
}

static int deleteCell(Rtree *, RtreeNode *, int, int);

static int removeNode(Rtree *pRtree, RtreeNode *pNode, int iHeight){
  int rc;
  int rc2;
  RtreeNode *pParent = 0;
  int iCell;

  assert( pNode->nRef==1 );

  /* Remove the entry in the parent cell. */
  rc = nodeParentIndex(pRtree, pNode, &iCell);
  if( rc==SQLITE_OK ){
................................................................................
    if( ii==(nCell-1) ){
      memcpy(&aCell[ii], pCell, sizeof(RtreeCell));
    }else{
      nodeGetCell(pRtree, pNode, ii, &aCell[ii]);
    }
    aOrder[ii] = ii;
    for(iDim=0; iDim<pRtree->nDim; iDim++){
      aCenterCoord[iDim] += (float)DCOORD(aCell[ii].aCoord[iDim*2]);
      aCenterCoord[iDim] += (float)DCOORD(aCell[ii].aCoord[iDim*2+1]);
    }
  }
  for(iDim=0; iDim<pRtree->nDim; iDim++){
    aCenterCoord[iDim] = (float)(aCenterCoord[iDim]/((float)nCell*2.0));
  }

  for(ii=0; ii<nCell; ii++){
    aDistance[ii] = 0.0;
    for(iDim=0; iDim<pRtree->nDim; iDim++){
      float coord = (float)(DCOORD(aCell[ii].aCoord[iDim*2+1]) - 
          DCOORD(aCell[ii].aCoord[iDim*2]));
      aDistance[ii] += (coord-aCenterCoord[iDim])*(coord-aCenterCoord[iDim]);
    }
  }

  SortByDistance(aOrder, nCell, aDistance, aSpare);
  nodeZero(pRtree, pNode);

................................................................................
    RtreeNode *pInsert;
    RtreeCell cell;
    nodeGetCell(pRtree, pNode, ii, &cell);

    /* Find a node to store this cell in. pNode->iNode currently contains
    ** the height of the sub-tree headed by the cell.
    */
    rc = ChooseLeaf(pRtree, &cell, (int)pNode->iNode, &pInsert);
    if( rc==SQLITE_OK ){
      int rc2;
      rc = rtreeInsertCell(pRtree, pInsert, &cell, (int)pNode->iNode);
      rc2 = nodeRelease(pRtree, pInsert);
      if( rc==SQLITE_OK ){
        rc = rc2;
      }
    }
  }
  return rc;
................................................................................
  sqlite3 *db,                    /* Database handle */
  Rtree *pRtree,                  /* Rtree handle */
  int isCreate                    /* True for xCreate, false for xConnect */
){
  int rc;
  char *zSql;
  if( isCreate ){
    int iPageSize = 0;
    zSql = sqlite3_mprintf("PRAGMA %Q.page_size", pRtree->zDb);
    rc = getIntFromStmt(db, zSql, &iPageSize);
    if( rc==SQLITE_OK ){
      pRtree->iNodeSize = iPageSize-64;
      if( (4+pRtree->nBytesPerCell*RTREE_MAXCELLS)<pRtree->iNodeSize ){
        pRtree->iNodeSize = 4+pRtree->nBytesPerCell*RTREE_MAXCELLS;
      }
................................................................................
**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** This file implements a tokenizer for fts3 based on the ICU library.


*/

#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3)
#ifdef SQLITE_ENABLE_ICU


#include <unicode/ubrk.h>
#include <unicode/utf16.h>